• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.65-74
• /
• 1994

Various substructure synthesis methods, such as component mode synthesis, building block analysis and reduced impedance method, are studied for the determination of vibration characteristics of plate problems. Comparisons are made for each methods in terms of accuracy and computational efficiency. Following conclusions are made from the results of computer simulations and experiments. i) The computation time of component mode synthesis is much shorter than that of whole structure analysis. The natural frequencies of lower modes obtained from component mode synthesis are almost same as those obtained from whole structure analysis, but in higher modes the differences between those two methods are increases. ii) The transfer function obtained from building block analysis is same as that obtained from the finite element method. iii) Same transfer functions can be obtained by the reduced impedance method. The computation time of reduced impedance mathod is shorter that that of general finite element method, but for the solutions in broad frequency band it requires long calculation time.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.71-83
• /
• 2009

숏크리트는 터널에서 적용되는 요요한 주지보재이다. 숏크리트의 품질평가는 터널의 안전한 시공과 효과적인 운영을 위한 핵심 요소이다. 숏크리트가 암반에 적절히 타설되었다 하더라도, 막장 및 벤치부에서의 발파, 수축, 지반의 변형 등으로 인해 숏크리트 균열발생 및 배면공동 등의 문제를 야기한다. 본 논문에서는 비파괴 시험인 충격 반항 기법(Impact-Echo) 및 지하레이다 탐사(GPR)를 이용하여 경임에 타설된 숏크리트 배면의 접착상태를 평가하고자 하였다. 기존의 수치해석 연구에 대한 검증과 더불어 현장 적용성에 대한 검토를 위해 실험적 연구를 수행하였다. 숏크리트의 접착상태는 완전 접착, 접착력 상실 및 공동 조건으로 구분할 수 있다. 실내 실대형 시험체에 이 세 가지 숏크리트 접착상태를 조사하였다. 충격반향시험으로부터 획득된 신호는 시간영역, 주파수 영역, 및 시간-주파수 영역에서 각각 분석되었다. 능동적 신호 처리 기법인 Short-Time Fourier Transform(STFT)을 이용하여 숏크리트 배면의 접착상태를 효과적으로 예측할 수 있었으며, 그 결과는 기존의 수치해석 연구로부터 획득한 신호특성과 잘 부합하였다. 숏크리트 배면의 접착상태가 불량할수록 다음과 같은 특징들을 나타낸다. 즉, 주파수 영역에서 자기스펙트럼밀도가 커지며, 기하학적 감쇠비는 감소하고, 시간-주파수 영역에서 윤곽선은 시간축에 평행한 형상을 나타내며, 숏크리트 두께가 얇을수록 그 공진시간이 길어진다. 또한 본 연구에서 제시한 상관계수를 이용하여 숏크리트의 접착상태를 정량적으로 평가할 수 있다. 본 연구 결과를 바탕으로 숏크리트의 접착상태를 평가할 수 있는 평가 기법 및 평가 기준을 제안하였다.

• 대한지역사회영양학회지
• /
• 제26권2호
• /
• pp.93-102
• /
• 2021

Objectives: This study was conducted to investigate the relationship between watching mukbang (eating broadcasts) and dietary and health behavior in adults who watch mukbang. Methods: The questionnaire was administered on a self-written basis through online and offline formats to 800 adults (400 men and 400 women). The contents of the survey consisted of general characteristics, mukbang viewing time per week, breakfast intake frequency, preference for menus when viewing mukbang, delivery food intake frequency per week, late meal intake frequency per week, and health behavior. The subjects were divided into three groups according to mukbang viewing time. Results: The body weight of viewers was significantly higher when mukbang viewing time was over 14 hours for both men and women. In particular, based on the BMI (body mass index), those who watched mukbang for more than 14 hours were found to be overweight. People with more than 14 hours of mukbang viewing time per week were found to prefer mostly carbohydrate-rich food and meat, while those with less than 7 hours of mukbang viewing time per week showed a higher preference for vegetables and fruits. An analysis of the frequency of breakfast eaten showed that the rate of skipping breakfast was the highest for those who watched mukbang for more than 14 hours per week, and the rate of eating breakfast daily was the highest in the case of fewer than 7 hours of viewing. In the case of high mukbang viewing time per week, the frequency of food delivery and night eating was high. When mukbang viewing time was high, the viewer's interest in health was low and the frequency of exercising too was low. Conclusions: Viewers with high mukbang viewing time showed undesirable health and eating behavior. Thus, it is believed that proper nutrition education on improving eating habits and raising the awareness of correct eating habits is necessary for such viewers.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.407-417
• /
• 2015

Recently, piezo-aeroelastic energy harvesting has received greater attention. In the present study, a piezo-aeroelastic energy harvester using a nonlinear trailing-edge flap is proposed, and its nonlinear aeroelastic behaviors are investigated. The energy harvester is modeled using a piezo-aeroelastic model of a two-dimensional typical section airfoil with a trailing-edge flap (TEF). A piezo-aeroelastic analysis is carried out using RL and time-integration methods, and the results are verified with the experimental data. The linearizing method using a describing function is used for the frequency domain analysis of the nonlinear piezo-aeroelastic system. From the linear and nonlinear piezo-aeroelastic analysis, the limit cycle oscillation (LCO) characteristics of the proposed energy harvester with the nonlinear TEF are investigated in both the frequency and time domains. Finally, the authors discuss the air speed range for effective piezo-aeroelastic energy harvesting.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.268-277
• /
• 1999

Impulsive acoustic and vibration signals within gear are often induced by impacting of fault tooths in gear. Thus the detection of these impulses can be useful for fault diagnosis. Recently there is an increasing trend towards the use of higher order statistics for fault detection within mechanical systems based on the observation that impulsive signals then to increase the kurtosis values. We show that the fourth order Wigner Moment Spectrum, called the Wigner Trispectrum, has found superior detection performance to second order Wigner distribution for typical impulsive signals in a condition monitoring application. These methods are also applied to data sets measured within an industrial gear box.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.223-229
• /
• 2014

In this paper, the natural frequency and damping ratio are analyzed with the acceleration signal of an Euler-Bernoulli beam using the impact hammer test. The results are presented according to crack depth and position using the recursive least squares method. The results are compared and investigated with FEM analysis of CATIA. Both methods agree well with each other regarding the natural mode characteristics. The captured acceleration can be used for the calculation of the natural frequency and damping ratio using time series methods that are based on the measured acceleration. Using these data, a recursive time series model with the acceleration signal was configured and the behaviors of the natural frequency and damping ratio were investigated and analyzed. Finally, the results can be used for the prediction of crack position and depth under different crack conditions for an Euler-Bernoulli beam.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.812-817
• /
• 2005

The objective of the present work is to develop a time-domain numerical method of broadband noise in a cascade of airfoils. This paper focuses on dipole broadband noise sources, resulting from the interaction of turbulent inflows with the flat-plate airfoil cascade. The turbulence response of a two-dimensional cascade is studied by solving both of the linearised and full nonlinear Euler equations employing accurate higher order spatial differencing, time stepping techniques and non-reflecting inflow/outflow boundary condition. The time-domain result using the linearised Euler equations shows good agreement with the analytical solution using the modified LINSUB code. Through the comparison of the nonlinear time-domain result using the full nonlinear Euler equations with the linear, it is found that the acoustic mode amplitude of the nonlinear response is less than that of the linear response due to the energy cascade from low frequency components to the high frequency ones. Considering the merits of the time-domain methods over the typical time-linearised frequency-domain analysis, the current method is expected to be promising tools for analyzing the effects of the airfoil shapes, non-uniform background flow, linear-nonliear regimes on the broadband noise due to gust-cascade interaction.

• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.419-433
• /
• 2020

Investigation of structural integrity has been a critical issue in the field of civil engineering for years. Visual inspection is one of the most available methods to explore deteriorative components in structures. Still, this method is not applicable to invisible damage of structures. Alternatively, system identification methods are capable of tracking modal properties of structures over time. The deviation of these dynamic properties can serve as indicators to access structural integrity. In this study, a modal tracking technique using frequency-domain system identification from seismic responses of structures is proposed. The method first segments the measured signals into overlapped sequential portions and then establishes multiple Hankel matrices. Each Hankel matrix is then converted to the frequency domain, and a temporal-average frequency-domain Hankel matrix can be calculated. This study also proposes the frequency band selection that can divide the frequency-domain Hankel matrix into several portions in accordance with referenced natural frequencies. Once these referenced natural frequencies are unavailable, the first few right singular vectors by the singular value decomposition can offer these references. Finally, the frequency-domain stochastic subspace identification tracks the natural frequencies and mode shapes of structures through quick stabilization diagrams. To evaluate performance of the proposed method, a numerical study is carried out. Moreover, the long-term monitoring strong motion records at a specific site are exploited to assess the tracking performance. As seen in results, the proposed method is capable of tracking modal properties through seismic responses of structures.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.276-283
• /
• 2012

In this study, it was studies the utilization of LIT(lock-in infrared thermography) which can detect defects in welded parts of ship and offshore structures. Quantitative analysis was used through methods of filtering and texture measurement of image processing techniques to find the optimized experimental condition. We verified reliability in our methods by applying image processing techniques in order to normalize evaluations of comparative images that show phase difference. In addition, low to mid exposure showed good results whereas high exposure did not provide significant results in regards to intensity of light exposure on surface. Lock-in frequency was satisfactory around 0.1 Hz regardless of intensity of light source we had. In addition, having the integration time of thermography camera inversely proportional to intensity of exposed light source during the experiment allowed good outcome of results.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.1-6
• /
• 2007

In the process of the acquisition, storage, transmission of signals, noises are generated by various causes and the degradation phenomenon by noises tends to generate serious errors for the signal with information. So, in order to analyze and remove these noises, studies on numerous mathematical methods such as the Fourier transform have been implemented. And recently there have been many ongoing wavelet-based denoising algorithms representing excellent characteristics in time-frequency localization and multiresolution analysis, but the method to remove additive white Gaussian noise (AWGN) and the impulse noise simultaneously was not given. So, to reconstruct the corrupted signal by noises, in this paper a novel wavelet-based denoising algorithm was proposed and using signal-to-noise ratio (SNR) this method was compared to conventional methods.