• 한국지진공학회논문집
• /
• 제24권2호
• /
• pp.103-110
• /
• 2020

Seismic qualification of instruments and devices mounted on electrical cabinets in a nuclear power plant is performed in this study by means of the in-cabinet response spectrum (ICRS). A simple method and two rigorous methods are proposed in the EPRI NP-7146-SL guidelines for generating the ICRS. The simple method of EPRI can give unrealistic spectra that are excessively conservative in many cases. In the past, the time domain analysis (TDA) methods have been mostly used to analyze a structure. However, the TDA requires the generation of an artificial earthquake input motion compatible to the target response spectrum. The process of generating an artificial earthquake may involve a great deal of uncertainty. In addition, many time history analyses should be performed to increase the accuracy of the results. This study developed a numerical analysis program for generating the ICRS by frequency domain analysis (FDA) method. The developed program was validated by the numerical study. The ICRS calculated by FDA thoroughly matched with those obtained from TDA. This study then confirms that the method it proposes can simply and efficiently generate the ICRS compared to the time domain method.

• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.31-37
• /
• 2014

탄성파는 지반 및 지반환경 관련 과업에서 다양한 형태로 활용되어 왔다. 일반적으로는 현장에서 탄성파 탐사를 수행하여 시추조사와 더불어 지반의 물성값을 평가하는 목적으로 사용되고 있으며, 지하공동의 위치파악 등에도 사용되고 있다. 환경복원이 필요한 버려진 부지에 매립된 유류 저장시설의 위치 파악 등 지반환경공학과 관련하여서도 탄성파의 활용은 활발히 이루어지고 있다. 또한 지반의 미소변형률 구간에서의 지반 거동 분석에도 탄성파를 활용하고 있다. 탄성파의 매질 내 이동속도가 주요 인자로서 활용되고 있는데, 이는 시간 영역과 주파수 영역에서 산정할 수 있다. 시간 영역에서의 탄성파의 이동속도 평가방법은 동일 위상을 갖는 특정한 점들의 시간차이를 분석하는 방법, 상호상관법을 활용한 방법으로 나뉠 수 있다. 주파수 영역에서의 탄성파의 이동속도는 진원과 수신점에서의 입력 파형과 수신파형의 위상 차이를 분석하여 산정할 수 있다. 본 연구에서는 시카고 지역에서 채취한 불교란 빙하퇴적 점성토 시료에 벤더 엘리먼트를 이용한 탄성파 시험을 실시, 동일한 탄성파에 대해 여러 가지 산정 방법을 적용하여 탄성파의 이동속도를 분석하였다. 시간영역에서 탄성파의 이동속도를 분석한 결과 데이터로거의 표본화 주파수에 영향을 크게 받는 것으로 분석되었으며, 신호에 포함되어있는 노이즈 및 수신파형의 요철 특성으로 인하여 같은 위상을 갖는 점을 정확히 찾는 것은 불가능하였다. 상호상관법으로 분석한 경우도 입력 파형과 수신파형의 주기의 차이로 인해 탄성파의 정확한 이동속도를 산정하는 것은 불가능하였다. 주파수 영역에서의 이동속도 산정의 경우 영채우기를 통해 주파수 분해능을 개선시킬 수 있어 데이터로거의 표본화 주파수에 영향을 받지 않았다. 과도파 사용으로 인한 지배주파수가 유일 값이 아닌 범위로 나타나는 단점이 있었으나, 지배주파수 범위 내의 탄성파의 이동속도의 범위는 시간 영역에서 산정한 값보다 정밀한 것으로 나타났다.

• 지능정보연구
• /
• 제5권1호
• /
• pp.103-123
• /
• 1999

Input filtering as a preprocessing method is so much crucial to get good performance in time series forecasting. There are a few preprocessing methods (i.e. ARMA outputs as time domain filters, and Fourier transform or wavelet transform as time-frequency domain filters) for handling time series. Specially, the time-frequency domain filters describe the fractal structure of financial markets better than the time domain filters due to theoretically additional frequency information. Therefore, we, first of all, try to describe and analyze specially some issues on the effectiveness of different filtering methods from viewpoint of the performance of a neural network based forecasting. And then we discuss about neural network model architecture issues, for example, what type of neural network learning architecture is selected for our time series forecasting, and what input size should be applied to a model. In this study an input selection problem is limited to a size selection of the lagged input variables. To solve this problem, we simulate on analyzing and comparing a few neural networks having different model architecture and also use an embedding dimension measure as chaotic time series analysis or nonlinear dynamic analysis to reduce the dimensionality (i.e. the size of time delayed input variables) of the models. Throughout our study, experiments for integration methods of joint time-frequency analysis and neural network techniques are applied to a case study of daily Korean won / U. S dollar exchange returns and finally we suggest an integration framework for future research from our experimental results.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.457-463
• /
• 2006

Recently proposed control scheme for a stable teleoperation, which was based on two-port time-domain passivity approach[21], has been successful for a contact with high stiffness environments. However, we found several conservatisms during the contact with deformable environments and unconstrained motion. The two-port time-domain passivity controller was excessively dissipating energy even though it was not necessary for some cases of an unconstrained motion and soft contact. The main reason of those conservatisms was on the fact that the two-port time-domain passivity controller was activated without considering the amount of energy dissipation at the master and slave manipulators. Especially, the exclusion of the slave manipulator from the two-port was the dominant reason of the conservatisms. In this paper, we consider the amount of energy dissipation at slave manipulator for designing the time-domain passivity observer and controller. The measured interaction force between slave manipulator and environment allow the time-domain passivity observer to include the amount of energy dissipation at the slave manipulator. Based on the modified passivity observer, reference energy following method[24] is applied to satisfy the passivity condition in real-time. The feasibility of the developed methods is proved with experiments. Improved performance is obtained for an interaction with deformable environments and an unconstrained motion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.812-817
• /
• 2005

The objective of the present work is to develop a time-domain numerical method of broadband noise in a cascade of airfoils. This paper focuses on dipole broadband noise sources, resulting from the interaction of turbulent inflows with the flat-plate airfoil cascade. The turbulence response of a two-dimensional cascade is studied by solving both of the linearised and full nonlinear Euler equations employing accurate higher order spatial differencing, time stepping techniques and non-reflecting inflow/outflow boundary condition. The time-domain result using the linearised Euler equations shows good agreement with the analytical solution using the modified LINSUB code. Through the comparison of the nonlinear time-domain result using the full nonlinear Euler equations with the linear, it is found that the acoustic mode amplitude of the nonlinear response is less than that of the linear response due to the energy cascade from low frequency components to the high frequency ones. Considering the merits of the time-domain methods over the typical time-linearised frequency-domain analysis, the current method is expected to be promising tools for analyzing the effects of the airfoil shapes, non-uniform background flow, linear-nonliear regimes on the broadband noise due to gust-cascade interaction.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.83-91
• /
• 2000

측정치를 이용하여 구조계를 규명하는 경우에 일반적으로 측정치를 주파수 영역으로 변환하고 이를 도식적으로 파악하는 방법이 주로 이용된다. 이러한 방법은 신뢰도가 낮고 토목구조물 특히 교량 구조물과 같이 근접한 모우드의 특성을 가지는 구조계의 규명에 불리한 것으로 알려져 있다. 본 논문에서는 시간영역에서의 데이터를 직접 이용하여 구조계의 모우드 특성을 규명하는 일련의 방법에 대한 적용성을 검토하였으며 이 때 발생할 수 있는 왜율에 대한 문제를 극복하기 위하여 최소자승법을 시간영역 규명기법에 중복하는 방법을 선택하였다. 제안된 방법의 타당성을 검토하기 위하여 현가계 모델을 이용하여 모의 해석을 수행하였다. 또한 실질적인 상황에서의 이용성을 검토하기 위하여 인위적인 잡음을 게재시켜 잡음에 대한 방범의 민감도를 검토하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.136-143
• /
• 1995

The problem of the structural identification becomes important, particularly with relation to the rapid increase of the number of the damaged or deteriorated structures, such as highway bridges, buildings, and industrial facilities. This paper summarizes the recent studies related to those problems by the present authors. The system identfication methods are generally classified as the time domain and the frequency domain methods. As time doamin methods, the sequential algorithms such as the extended Kalman filter and the sequential prediction error method are studied. Several techniques for improving the convergences are incorporated. As frequency domain methods, a new frequency response function estimator is introduced. For damage estimation of existing structures, the modal perturbation and the sensitivity matrix methods are studied. From the example analysis, it has been found that the combined utilization of the measurement data for the static response and the dynamic (modal) properties are very effictive for the damage estimation.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.299-307
• /
• 2011

The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.119-127
• /
• 2006

A non-destructive time domain approach to examine structural damage using parameterized partial differential equations and Galerkin approximation techniques is presented. The time domain analysis for damage detection is independent of modal parameters and analytical models unlike frequency domain methods which generally rely on analytical models. The time history of the vibration response of the structure was used to identify the presence of damage. Damage in a structure causes changes in the physical coefficients of mass density, elastic modulus and damping coefficients. This is a part of our ongoing effort on the general problem of modeling and parameter estimation for internal damping mechanisms in a composite beam. Namely, in detecting damage through time-domain or frequency-domain data from smart sensors, the common damages are changed in modal properties such as natural frequencies, mode shapes, and mode shape curvature. This paper examines the use of beam-like structures with piezoceramic sensors and actuators to perform identification of those physical parameters, and detect the damage. Experimental results are presented from tests on cantilevered composite beams damaged at different locations and different dimensions. It is demonstrated that the method can sense the presence of damage and obtain the position of a damage.