• Title/Summary/Keyword: time switching protocol

Search Result 74, Processing Time 0.021 seconds

Distributed Space-Time Coded Non-Orthogonal DF Protocols with Source Antenna Switching

  • Jin, Xianglan;Yang, Jae-Dong;No, Jong-Seon;Shin, Dong-Joon
    • Journal of Communications and Networks
    • /
    • v.12 no.5
    • /
    • pp.492-498
    • /
    • 2010
  • In this paper, a new distributed space-time coded (DS-TCed) non-orthogonal decode-and-forward (NDF) protocol with source antenna switching (SAS) is proposed, where two antennas associated with each radio frequency chain can be alternatively used in the first and second phases. Several DSTC schemes for the NDF with SAS (NDF-SAS) protocol are proposed and their average pairwise error probability for the error-free source-relay (SR) channel is also derived. The simulation results show that the NDF-SAS protocol achieves larger diversity order than the NDF protocol under the error-free and erroneous SR channels.

MPLS Traffic Engineering of standard skill (MPLS Traffic Engineering의 표준 기술)

  • Kim, Kang;Jeon, Jong-Sik;Kim, Ha-Sik
    • Journal of the Korea Society of Computer and Information
    • /
    • v.6 no.4
    • /
    • pp.68-73
    • /
    • 2001
  • MPLS(Multi protocol Label Switching) is standard skill for added to speed and control the Network Traffic. MPLS concerned the routing protocol to relative Pack line, Each Pack composed label and node, saved the time to seek the address of node. MPLS worked IP, ATM and Network protocol of flame rely. MPLS is Network OSI suport model, 2Layer send to most of Packinsted of 3Layer Switching. MPLS is added speed Traffic of QoS and effective controled the Network.

  • PDF

Simultaneous Burst and Burst Control Packet Transmission Protocol for Optical Burst Switching Ring Networks

  • Park, Joon-Pyo;Lee, Man-Seop
    • ETRI Journal
    • /
    • v.29 no.1
    • /
    • pp.116-119
    • /
    • 2007
  • In this letter, we design a collision resolution protocol for optical burst switching ring networks to avoid burst collision. We define the offset time condition for no burst transmission collision and manage the free time list of nodes for no burst reception collision. In order to improve the throughput, we use a fiber delay line, void-filling, and void-compression. This protocol does not require any additional procedures for bandwidth reservation such as centralized assignment of bandwidth, lightpath setup of WDM ring networks, or token capturing for the burst transmission. The simulation results show that the proposed protocol can achieve high throughput while saving 70% of wavelengths when compared to round robin with random selection, round robin with persistent, and round robin with non-persistent with only destination delay.

  • PDF

A Study on the Design of Hardware Switching Mechanism using TCP/IP Communication (TCP/IP를 이용한 하드웨어 전환장치 설계에 관한 연구)

  • Kim, Chong-Sup;Cho, In-Je;Lim, Sang-Soo;Ahn, Jong-Min;Kang, Im-Ju
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.13 no.7
    • /
    • pp.694-702
    • /
    • 2007
  • The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

IMT-2000 Packet Data Processing Method utilizing MPLS (MPLS망을 적용한 IMT2000 시스템에서의 패킷 데이터 처리 절차)

  • Yu, Jae-Pil;Kim, Gi-Cheon;Lee, Yun-Ju
    • The Transactions of the Korea Information Processing Society
    • /
    • v.6 no.11S
    • /
    • pp.3190-3198
    • /
    • 1999
  • Because of the rapid growth of the mobile communication, the need for the mobile internet access has grown up as well. since the current mobile communication network, however, is optimized for a voice communication system, which exclusively occupies a channel for a given time, it is not suitable for variable rate packet data. In order to support the mobile internet access, it is essential do design a reasonable packet switching network which supports the mobility. Since mobile packet network has longer latency, high speed switching and QoS are required to meet the user's requirements. In this paper, we suggest an resonable way to construct a network and its operation procedures utilizing GPRS(General Packet Radio Service) network and MPLS(Multi Protocol Label Switching) to provide a high speed switching and QoS mobile internet access. GPRS is used as a network which supports the mobility and MPLS guarantees the QoS and high speed IP protocol transmission based on the ATM switching technology.

  • PDF

Research on The SWIPT System Throughput Based on Interference Signal Energy Collecting

  • Jianxiong Li;Hailong Jiang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.17 no.8
    • /
    • pp.2170-2187
    • /
    • 2023
  • The general interference is the imperative trouble for simultaneous wireless information and power transfer (SWIPT) system. Although interference has bad influences on the performance of the system, it carries energy simultaneously. In this paper, the energy-constrained relay of the SWIPT system needs to spend much time on energy collecting (EC) in the information transmission (IT) period. Therefore, we propose the scheme of interference signal energy collecting (ISEC) when the interference is strong, and the SWIPT system does not carry out IT. The relay of the system continues to collect energy and stores it until the interference has minimal impact on IT. Then the system performs IT. We divide the collected interference energy equally into several parts, and each IT block receives one part. The proposed scheme is appealing because it can reduce the time of EC in IT period to make the relay spends more time forwarding the received signal in order to improve the performance of the system throughput. Furthermore, we propose a time-switching (TS) protocol based on EC at the relay. And it allows the relay forwarding signal at an appropriate power. Under the protocol, the time of EC can be flexible according to the forwarding power that we give so that the collected energy can be used more efficiently. We give the expressions of the system throughput according to the proposed scheme and protocol. Moreover, the influence of the interference power on the system throughput is also studied.

Optical Resource Reservation Protocol for OBS Networks (OBS 네트워크를 위한 광 자원 예약 프로토콜)

  • 엄태원;최준균
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.40 no.10
    • /
    • pp.43-50
    • /
    • 2003
  • This paper describes the optical resource reservation protocol for Optical Burst Switching(OBS) networks, in which the burst sending time and the burst size at an ingress node are determined by the available resources between the ingress and egress nodes. Our scheme attempts to improve the burst contention resolution and optical channel utilization. We analyze the performance of the optical resource reservation protocol by using NS2 simulator.

Cooperative Nano Communication in the THz Gap Frequency Range using Wireless Power Transfer

  • Samarasekera, A. Chaminda J.;Shin, Hyundong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.13 no.10
    • /
    • pp.5035-5057
    • /
    • 2019
  • Advancements in nanotechnology and novel nano materials in the past decade have provided a set of tools that can be used to design and manufacture integrated nano devices, which are capable of performing sensing, computing, data storing and actuation. In this paper, we have proposed cooperative nano communication using Power Switching Relay (PSR) Wireless Power Transfer (WPT) protocol and Time Switching Relay (TSR) WPT protocol over independent identically distributed (i.i.d.) Rayleigh fading channels in the Terahertz (THz) Gap frequency band to increase the range of transmission. Outage Probability (OP) performances for the proposed cooperative nano communication networks have been evaluated for the following scenarios: A) A single decode-and-forward (DF) relay for PSR protocol and TSR protocol, B) DF multi-relay network with best relay selection (BRS) for PSR protocol and TSR protocol, and C) DF multi-relay network with multiple DF hops with BRS for PSR protocol and TSR protocol. The results have shown that the transmission distance can be improved significantly by employing DF relays with WPT. They have also shown that by increasing the number of hops in a relay the OP performance is only marginally degraded. The analytical results have been verified by Monte-Carlo simulations.

The medium access control protocol of virtual token bus network for real time communication (실시간 통신을 위한 가상토큰버스 통신망의 매체접근제어 프로토콜)

  • 정연괘
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.7
    • /
    • pp.76-91
    • /
    • 1996
  • In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

  • PDF

Cognitive Radio Based Jamming Resilient Multi-channel MAC Protocol for Wireless Network

  • Htike, Zaw;Hong, Choong Seon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2009.11a
    • /
    • pp.679-680
    • /
    • 2009
  • Radio jamming attack is the most effective and easiest Denial-of-Service (DOS) attack in wireless network. In this paper, we proposed a multi-channel MAC protocol to mitigate the jamming attacks by using cognitive radio. The Cognitive Radio (CR) technology supports real-time spectrum sensing and fast channel switching. By using CR technologies, the legitimate nodes can perform periodic spectrum sensing to identify jamming free channels and when the jamming attack is detected, it can switch to un-jammed channel with minimum channel switching delay. In our proposed protocol, these two CR technologies are exploited for thwarting the jamming attacks.