• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.27-29
• /
• 1999

The starting characteristics of induction motors strongly depend on the leakage reactance and resistance of stator winding and rotor circuits. The magnetic field saturation in the rotor bridge of closed slot rotor makes it very difficult to compute the leakage reactance of rotor bars. This paper describes a comparison between timestep finite element analysis, time-harmonic analysis and experimental results for a test model which can represent the nonlinear behaviour of the rotor bridge.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.5-11
• /
• 2005

Among the micro machining techniques, micro EDM is generally used for machining micro holes, pockets, and micro structures on difficult-cut-materials. Micro EDM parameters such as applied voltage, capacitance, peak current, pulse width, duration time are very important to fabricate the tool electrode and produce the micro structures. Developed micro EDM machine is composed of a 3-axis driving system and RC circuit equipped with pulse generator. In this paper, using micro EDM machine, the characteristics of micro EDM process are investigated and it is applied to micro holes, slots, and pockets machining. Through experiments, relations between machined surface and voltages and between MRR and feedrate are investigated. Also the trends of tool wear are investigated in case of hole and slot machining.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.33-36
• /
• 1987

Is this study it is proposed a method which is able to compute preciously using time-difference method to the air-gap magnetic field in electric machines take into account of eddy current induced. The air-gap magnetic field has slot harmonics which are due to the structure of machines and the shape of slot harmonics varies with the related positions of slots when the rotor moves. Accordingly, considering the influence of slot-harmonics, we coupled macro-air-gap element with first-order triangular elements in domain and used direct-convergence method for magnetic saturation.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.110-120
• /
• 2014

This article proposes a spectrum sharing method which can avoid the mutual interference in both primary and secondary systems. The two systems make them a priority to use two single-dimension orthogonal signals, the real and imaginary pulse amplitude modulation signals, if the primary system is not in outage with this use. A secondary transmitter is selected to be the primary relay and the active secondary source to perform this. This allows a simultaneous spectrum access without any mutual interference. Otherwise, the primary system attempts to use a full two-dimensional signal, the quadrature amplitude modulation signal. If there is no outage with respect to this use, the secondary spectrum access is not allowed. When both of the previous attempts fail, the secondary system is allowed to freely use the spectrum two whole time slots. The analysis and simulation are provided to analyze the outage performance and they validate the considerable improvement of the proposed method as compared to the conventional one.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.311-316
• /
• 2010

According to increase of combined cycle power generation, the manufacturing market of gas turbine generator has become more competitive, so there is high pressure on the manufacturer to reduce generator price. Global VPI(vacuum pressure impregnation) method is effective to save the production cost and time for manufacturing stator windings, but it has an abrasion problem by vibration between stator windings and slots. This paper presents the insulation breakdown case, which is for VPI type generator during high voltage insulation tests, and also shows the cause analysis, repair works as well as reliability test. the purpose of this paper is to understand the insulation properties of VPI type generator and to know prevention of insulation weakness.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.48-52
• /
• 2004

In this letter, we consider a new packet scheduling algorithm for an orthogonal frequency division multiplexing access/frequency division duplex (OFDMA/FDD)-based system, e.g., mobile broadband wireless access or high-speed portable internet systems, in which the radio resources of both time and frequency slots are dynamically shared by all users under a proper scheduling policy. Our design objective is to increase the number of non-realtime service (e.g., WWW) users that can be supported in the system, especially when the minimum bit rate requirement is imposed on them. The simulation results show that our proposed algorithm can provide a significant improvement in the average outage probability performance for the NRT service, i.e., significantly increasing the number of NRT users without much compromising of the cell throughput.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.65-67
• /
• 2001

In general, the results of finite element method(FEM) on the analysis of the electrical machines has known as high accuracy but required very long time to calculate the field distribution. Magnetic equivalent circuit(MEC) method can be computing times less than the finite element method and also it provides steady state and transient state simulation. In this paper, describes matrix representation of the winding magneto motive force(MMF) and carry out the distributed the airgap magnetic density takes into account the influence on the stator slots.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.55-62
• /
• 2023

Slotted-Aloha (S-Aloha) has been widely employed in random access networks owing to its simple implementation in a distributed manner. To enhance the throughput performance of the S-Aloha, connection-based slotted-Aloha (CS-Aloha) has been proposed in recent years. The fundamental principle of the CS-Aloha is to establish a connection with a short-sized request packet before transmitting data packets. Subsequently, the connected node transmits long-sized data packets in a batch of size M. This approach efficiently reduces collisions, resulting in improved throughput compared to the S-Aloha, particularly for a large M. In this paper, we address the short-term fairness of the CS-Aloha, as quantified by Jain's fairness index. Specifically, we evaluate how equitably the CS-Aloha allocatestime slots to all nodes in the network within a finite time interval. Through simulation studies, we identify the impact of system parameters on the short-term fairness of the CS-Aloha and propose an optimal transmission probability to support short-term fairness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2509-2528
• /
• 2012

Time division multiple access (TDMA) is a widely used media access control (MAC) technique that can provide collision-free and reliable communications, save energy and bound the delay of packets. In TDMA, energy saving is usually achieved by switching the nodes' radio off when such nodes are not engaged. However, the frequent switching of the radio's state not only wastes energy, but also increases end-to-end delay. To achieve high energy efficiency and low delay, as well as to further minimize the number of time slots, a multi-objective TDMA scheduling problem for industrial wireless mesh networks is presented. A hybrid algorithm that combines genetic algorithm (GA) and simulated annealing (SA) algorithm is then proposed to solve the TDMA scheduling problem effectively. A number of critical techniques are also adopted to reduce energy consumption and to shorten end-to-end delay further. Simulation results with different kinds of networks demonstrate that the proposed algorithm outperforms traditional scheduling algorithms in terms of addressing the problems of energy consumption and end-to-end delay, thus satisfying the demands of industrial wireless mesh networks.