• 제목/요약/키워드: time sensitive communication

검색결과 183건 처리시간 0.033초

저속 PLC 모뎀에서의 Chirp 신호 방식과 시스템 구현에 관한 연구 (A study for chirp signal method & system implementation in the PLC modem with low speed)

  • 정영화;이상건
    • 정보학연구
    • /
    • 제7권3호
    • /
    • pp.37-45
    • /
    • 2004
  • 제어 목적으로 주로 사용되는 기존의 60bps 급 저속 전력선 통신 모뎀에 적용된 대표적인 통신 방식은 단일 캐리어 방식이다. 단일 캐리어 방식은 전력선 통신 채널 환경에 매우 민감하다. 특히 채널의 notch 필터 특성에 따른 송신 신호의 극심한 감쇄는 통신 에러의 주 원인이 된다. 국내 전력선 채널 환경은 이러한 특징이 매우 강하다. 본 논문에서는 notch 특성 및 잡음 특성에 강한 Chirp 신호 방식을 이용한 저속 전력선 통신 시스템을 구현하였다. 본 연구에서는 1 비트에 대해 1ms 내에 100${\mu}s$의 1 Unit 심볼 Chirp 신호 10개를 전소하는 방식을 제안하였다. 또한 오류 정정을 위한 Convolution 부호와 충돌 감지 및 에러 검출을 위한 맨체스터 부호를 적용하였으며, 수신부에서 신호 검출을 위해 비트 상관기를 이용한 방식을 사용하였다. 60bps급 저속 전력선 통신 시스템을 구현하여 실험한 결과 Chirp 방식의 통신 방식이 단일 캐리어 방식에 비해 뛰어난 성능을 가짐을 확인하였다.

  • PDF

전력선통신을 이용한 전력품질 모니터링 시스템 (Power Quality Monitoring System of Using Power Line Communication)

  • 홍덕표;최재호
    • 조명전기설비학회논문지
    • /
    • 제19권4호
    • /
    • pp.91-97
    • /
    • 2005
  • 산업화로 인버터, 컨버터, 스위칭 전원공급기, 모터와 같은 비선형 장치들이 늘어가고 있다. 그러나 컴퓨터와 전기장치 등과 같은 전력품질에 민감한 부하의 사용이 빠르게 확산되어 왔다. 게다가 전력품질 문제와 실시간 전력품질 모니터링은 산업과 빌딩에서 시스템의 지능제어로써 관심이 증대되고 있는 문제 중에 하나이다. 그중 하나인 전력선통신을 이용한 전력품질 모니터링 시스템은 새로운 선로가 없이도 전력품질 정보를 보내고 받을 수 있는 큰 장점을 가지고 있다. 본 논문에서는 IEEE Std. 1159의 분류에 따라 전력품질 문제를 측정하는 알고리즘의 개발과 보드를 제작하고 이를 전력선통신을 이용하여 모니터링하는 시스템을 구현하였다.

초크코일을 이용한 SPD 조합회로의 잔류전압 저감기법 (A method for reducing the residual voltage of hybrid SPD circuit using choke coils)

  • 이태형;조성철;한후석;엄주홍
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1488-1489
    • /
    • 2006
  • Gas Discharge Tubes (GDTs) are widely used as surge protectors for communication applications due to their small internal capacitance. In these days, however, they are mostly used in combined configurations, because the activation voltage required to initiate the discharge process in the GDTs for sufficient amount of time can be large enough to damage surge-sensitive protected circuits. For GDTs with a considerably high initial over-voltage value, we should limit the peak voltage using a TVS or filter. As for ZnO varistors, even though their performance for voltage restriction is excellent their applications in high-frequency communication circuits have been limited because of higher internal capacitance when compared to the GDTs. In order to develop a surge protector for communication applications by taking advantages of these two devices, we built a combination circuit that connects a GDT and a ZnO varistor along with a choke coil in common and differential modes. We describe how the applied SPDs operate in protection process steps with the actual data obtained from the residual voltage measurements at each step. The experiment results show that the surge voltage restriction with the choke coil is more effective in differential mode than in common mode.

  • PDF

Resource Allocation and Offloading Decisions of D2D Collaborative UAV-assisted MEC Systems

  • Jie Lu;Wenjiang Feng;Dan Pu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제18권1호
    • /
    • pp.211-232
    • /
    • 2024
  • In this paper, we consider the resource allocation and offloading decisions of device-to-device (D2D) cooperative UAV-assisted mobile edge computing (MEC) system, where the device with task request is served by unmanned aerial vehicle (UAV) equipped with MEC server and D2D device with idle resources. On the one hand, to ensure the fairness of time-delay sensitive devices, when UAV computing resources are relatively sufficient, an optimization model is established to minimize the maximum delay of device computing tasks. The original non-convex objective problem is decomposed into two subproblems, and the suboptimal solution of the optimization problem is obtained by alternate iteration of two subproblems. On the other hand, when the device only needs to complete the task within a tolerable delay, we consider the offloading priorities of task to minimize UAV computing resources. Then we build the model of joint offloading decision and power allocation optimization. Through theoretical analysis based on KKT conditions, we elicit the relationship between the amount of computing task data and the optimal resource allocation. The simulation results show that the D2D cooperation scheme proposed in this paper is effective in reducing the completion delay of computing tasks and saving UAV computing resources.

상업공간에서 재료를 통한 공간의 컨버전 소통 방법 연구 - 2008~2012년 국내·외 상업공간을 중심으로 - (A Study on Space of Conversion Communication Method through Materials in Commercial Space - Focusing on Domestic and International Commercial Spaces in 2008~2012 -)

  • 지주연;서지은
    • 한국실내디자인학회논문집
    • /
    • 제22권2호
    • /
    • pp.194-202
    • /
    • 2013
  • Commercial spaces are very sensitive in terms of trend and uniqueness, and many elements expressing space coexist together with brilliant ideas aiming to attract consumer attention and even induce sudden desire of purchase. Coexistence in space is expressed in various ways and out of those ways, representation by material is especially apparent. The application of material does not individually influence the expression of space, but the characteristics of multiple materials applied contribute to the distinction of space through mutual communication. This study intends to analyze how conversion is centered to express the distinction of space through materials communicated in space. The detailed study results are as follows. First, the conversion expression method of material resulted as 'Substitution', 'Contrast', 'Assimilation', 'Creation'. These four was divided and analyzed into 'Time', 'Space', 'Genre'. As a result of this analysis, such significances were shown as 'Contrast' in 'Time', 'Substitution' in 'Space', and 'Assimilation' in 'Genre'. Second, the conflict due to heterogeneity by conversion of 'Contrast' in 'Time' through past and current materials appeared to induce interest amongst consumers. Third, within 'Space', 'Substitution' of natural/artificial materials was noticeably applied. This is evaluated as a constructive way of expressing natural forms into artificial forms further intending to provoke attention and stimulate emotion. Fourth, in conversion through 'Assimilation' in 'Genre', rather than using materials only from other areas, synchronizing it by combining architectural materials is an effective method. Such results are thought to be a distinctive design method that draws attention of customers by communicating disparate materials in commercial space. Thus, the study results are expected to be utilized as an elementary resource in designing commercial space with character and high satisfaction.

Coherent fiber-optic intrusion sensor for long perimeters monitoring

  • Choi Kyoo Nam
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.876-879
    • /
    • 2004
  • The buried fiber optic cable as a distributed intrusion sensor for detecting and locating intruders along the long perimeters is proposed. Phase changes resulting from either the pressure of the intruder on the ground immediately above the buried fiber or from seismic disturbances in the vicinity are sensed by a phase-sensitive optical time-domain reflectometer. Light pulses from a Er:fiber cw laser with a narrow, <3kHz-range, spectral width and a frequency drift of < 1 MHz/min are injected into one end of the fiber, and the backscattered light from the fiber is monitored with a photodetector. Results of preliminary studies, measurement of phase changes produced by pressure and seismic disturbances in buried fiber optic cables and simulation of ${\varphi}-OTDR$ response over long fiber paths, to establish the feasibility of the concept are described. The field experiments indicate adequate phase changes, more than 1t-rad, are produced by intruders on foot and vehicle for burial depths in the 0.2 m to 1 m range in sand, clay and fine gravel soils. The simulations predict a range of 10 km with 35 m range resolution and 30 km with 90 m range resolution. This technology could in a cost-effective manner provide enhanced perimeter security.

  • PDF

블록별 모션정보에 의한 감시시스템의 구현 (Implementation of Supervisory System for Motion Information per Blocks)

  • 김형균;오무송
    • 한국정보통신학회논문지
    • /
    • 제8권1호
    • /
    • pp.74-79
    • /
    • 2004
  • 본 연구에서는 동작 검출 기법을 소형 화상 카메라에 적용하여 감시 영상을 검출하는 감시시스템을 구현하였다. 기존에 사용되던 차 영상의 화소 값을 이용한 동작 검출 기법은 배경 영상을 저장할 메모리가 필요하고 화소 단위의 데이터 처리로 인하여 수행 시간의 증가와 노이즈에 민감한 단점을 감수해야만 한다. 이러한 단점을 해결하고 노이즈에 강인한 성질을 갖게 하기 위해서 블록 단위로 모션 정보를 추출하여 비교하는 기법을 제안하였다. 블록별로 모션 정보를 얻는 경우 기준 영상의 블럭 단위의 특징 값과 현재 영상의 블럭 특징 값만을 비교하기 때문에 프레임 메모리가 필요 없고 단지 기준 영상의 블럭 특징 값만을 저장하면 된다. 또한 블럭 단위로 특징 값을 구하는 과정에서 화소 값을 이용한 동작 검출 보다 노이즈에 대한 영향을 감소시키고 카메라의 흔들림 등에 덜 민감한 효과를 얻을 수 있다.

RSA 일방향 어큐뮬레이터를 이용한 효율적이고 동적인 인증 딕셔너리 설계 (Efficient and Dynamic Authenticated Dictionary Design Using RSA One-way Accumulator)

  • 김순석;이용희;이강우
    • 한국정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.651-660
    • /
    • 2008
  • 현재 인터넷과 같이 널리 사용되는 공개된 네트워크를 통해 법률적으로 유효한 문서나 상거래 계약서와 같은 엄격한 보안이 요구되는 기밀정보가 교환되고 있으며, 이와 동시에 이러한 기밀정보의 교환에 있어서 정보의 무결성과 인증을 위해 공개키 인증서가 사용되고 있다. 그러나 현 공개키 기반구조 환경에서는 공개키 인증서의 유효성을 확인하는데 있어서 전송용량 면이나 안전성면에서 여러 가지 문제점들을 내포하고 있다. 본 논문은 RSA 일방향 어큐뮬레이터를 사용하여 믿을 수 있는 정보제공자에 의해 유지되는 집합에 대한 사용자의 멤버쉽 질의에 대해 공모 가능한 디렉토리가 암호학적으로 검증된 응답을 제공하는 효율적이고 동적인 인증된 딕셔너리를 실현하였다.

수중채널 시뮬레이터를 활용한 수중음향통신 시스템 성능 분석 (Performance Analysis of Underwater Acoustic Communication Systems Using Underwater Channel Simulation Tool)

  • 오세현;김현수;김재수;조정홍;정재학;송희천
    • 한국음향학회지
    • /
    • 제31권6호
    • /
    • pp.373-383
    • /
    • 2012
  • 수중음향통신 시스템의 성능은 다중경로 전달특성에 의해 발생하는 인접심볼간 간섭(ISI, Inter-Symbol Interference)과 도플러 편이(Doppler shift)에 영향을 받는다. 그러므로 해양도파관 환경의 수치실험은 다중경로에 의해 발생하는 시간 확산과 송 수신기의 움직임으로 발생하는 도플러 편이로 인한 시변동성을 고려해야 한다. 본 논문에서는 해양도파관 환경의 변동성을 고려한 가상의 신호 생성 시뮬레이터인 VirTEX(Virtual Time series EX-periment)를 활용[10]하여 시뮬레이터 기반 수중음향통신 시스템의 성능을 검증하였다. 수중음향통신 시스템 성능 검증을 위해 해상실험에서 획득한 실측데이터와 VirTEX 기반 수치모의 된 데이터의 채널응답분석 및 통신성능 분석을 수행한다. 해상실험 및 수치모의실험을 통해 수신된 탐침신호의 채널 임펄스 응답(channel impulse response) 분석결과 다중경로 개수와 깊이에 따른 채널응답의 변화 경향이 매우 유사함을 확인하였으며, 해상실험 및 수치모의실험을 통해 수신된 통신신호의 BER(Bit Error Rate)을 통하여 VirTEX 시뮬레이터를 활용한 수중음향통신 시스템의 통신성능을 확인하였다.

실리콘 기반 타원편광계식 바이오센서를 이용한 심근경색 생체표지자의 실시간 초고감도 진단 농도 측정 (Real-time Highly Sensitive Measurement of Myocardial Infarction Biomarkers Using Silicon-based Ellipsometric Biosensors)

  • 민윤기;조현모;조재흥
    • 한국광학회지
    • /
    • 제30권2호
    • /
    • pp.59-66
    • /
    • 2019
  • $2^{\circ}$ 기울어진 산화막 코팅 실리콘 기판의 바이오칩과 프리즘으로 제작한 바이오센서와 검광자 회전 타원편광계를 이용하여 심근경색 생체표지자인 미오글로빈과 cTnI의 진단 농도를 수백 초 내에 실시간 초고감도로 측정하는데 성공하였다. 러닝 버퍼로는 순수한 phosphate buffered saline (PBS) 또는 PBS에 10% 인간 혈청을 섞은 러닝 버퍼를 사용하였다. PBS 조건에서는 미오글로빈과 cTnI가 각각 1 ng/mL와 5 pg/mL로 측정되었으며, PBS에 인간 혈청을 10% 섞은 조건에서는 미오글로빈과 cTnI는 각각 1 ng/mL과 1 pg/mL로 측정되었다. 이러한 심근경색 생체표지자의 진단 농도는 현재 제시된 세계보건기구의 심근경색 진단 기준 농도보다 미오글로빈은 1/15배 낮고, cTnI는 1/80배 낮다.