• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.111-117
• /
• 2017

The arrival time of rescue ships is very important in the event of distress. This paper presents the development of experimental data to calculate the arrival time of rescue ships. The ship's traffic probability distribution was used. Mokpo Port was selected as the area of study, and AIS data for a 1 year period were used. For the ship's traffic probability distribution, a gateline was established. The lateral range distribution was calculated and fitted to the normal distribution and two Gaussian mixture distributions (GMD2), and each parameter was extracted. After the locations of ${\mu}$, ${\mu}{\pm}1{\sigma}$ of the normal distribution and ${\mu}_1$ of the two Gaussian mixture distribution(GMD2) were set as waypoints, the location and probability were determined. A scenario was established in relation to each type of parameter. Thus, the arrival time can be calculated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.415-421
• /
• 2009

TOA(time-of-arrival) and TDOA(time-difference-of-arrival) positioning techniques are commonly used in many radio-navigation systems. From the literature, it is known that the position estimate and error covariance matrix of TDOA obtained by GN(Gauss-Newton) method is exactly the same as that of TOA when the error source of the range measurement is only an IID white Gaussian noise. In case of geo-location and indoor positioning, however, multi-path or NLOS(non-line-of-sight) error is frequently appeared in range measurements. Though its occurrence is random, the multipath acts like a bias for a stationary user if it occurs. This paper presents the comparisons of error characteristics between TOA and TDOA positioning in presence of multi-path or NLOS error. It is analytically shown that the position estimate of TDOA is exactly the same as that of TOA even when bias errors are included in range measurements with different magnitudes. By computer simulation, position estimation error and error distribution are analyzed in presence of range bias errors.

• Smart Structures and Systems
• /
• v.24 no.2
• /
• pp.173-182
• /
• 2019

Due to the degradation of beamforming properties at angles close to $0^{\circ}$ to $180^{\circ}$, linear array does not have a complete $180^{\circ}$ inspection range but a smaller one. This paper develops a improved sensor array with two additional sensors above and below the linear sensor array, and presents time difference and two dimensional multiple signal classification (2D-MUSIC) based impact localization for omni-directional localization on composite structures. Firstly, the arrival times of impact signal observed by two additional sensors are determined using the wavelet transform and compared, and the direction range of impact source can be decided in general, $0^{\circ}$ to $180^{\circ}$ or $180^{\circ}$ to $360^{\circ}$. And then, 2D-MUSIC based spatial spectrum formula using uniform linear array is applied for locate accurate position of impact source. When the arrival time of impact signal observed by two additional sensors is equal, the direction of impact source can be located at $0^{\circ}$ or $180^{\circ}$ by comparing the first and last sensor of linear array. And then the distance is estimated by time difference algorithm. To verify the proposed approach, it is applied to a quasi-isotropic epoxy laminate plate and a stiffened composite panel. The results are in good agreement with the actual impact occurring position.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.437-443
• /
• 2019

In this paper, a new algorithm for the calculation of the range between an LTE base station (BS) and a user equipment (UE) using time-of-arrival (TOA) measurements of LTE signals is proposed. First, the cell identity (cell ID) of the received signal is acquired using the primary synchronization signal (PSS) and secondary synchronization signal (SSS) to identify the BS transmitted the signal. The proposed algorithm exploits the cell-specific reference signal (CRS), the reference sequence inserted in commercial LTE signals, to estimate the time delay using 2D cross-correlation. The obtained TOA estimations can be used to calculate the range employed from the known BS location. The performance of the proposed algorithm is evaluated with the experiment performed using real LTE signals transmitted from the commercial BS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.694-699
• /
• 2011

A closed-form technique is presented for estimating a single source location from a set of noisy time delay measurements between distributed sensors. The localization formula is derived from nonlinear least squares minimization over the unknowns of target range and bearing in polar coordinates. Computer simulation results are provided for the purpose of performance analysis. Constrained least squares minimization method with prior source location information is also discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.163-169
• /
• 2020

The asynchronous bistatic sonar needs to estimate direct blast arrival time at a receiver to localize targets, and therefore the direct blast arrival time estimation error could be added to target localization error in comparison with synchronous system. Direct blast especially appears as several peaks at the matched filter output by multipath, thus we compared the first peak detection technique and the maximum peak detection technique of those peaks for direct blast arrival time estimation through sea trial data. The test was performed in a shallow sea with bistatic sonar made up of spatially separated source and line array sensors. Line array sensors obtained the target signal which is generated from the echo repeater. As a result, the first peak detection technique is superior to maximum peak detection technique in direct blast arrival time estimation error. The result of this analysis will be used for further research of target tracking in the asynchronous bistatic sonar.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1508-1517
• /
• 1993

In this paper, we propose the modeling of a wireless communication system using CSMA protocol, present analytical evalution and simulation as a function of arrival rate and mean END-to-END delay in the distributed packet radio network. Asynchronous 1-persistent CSMA protocol is used in wireless communication system with half duplex. We assume that all terminals are to be in the close range of each other, suitably located in the local area. The traffic presented to a common channel is assumed to be poisson distribution. Analytical model is based on a M/D/1 with breakdown. In conclusion for wireless network model proposed in this paper is suitable for packet arrival rate of 2 packet/sec with mean packet delay time less than 2 times the packet transmission time.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.35-38
• /
• 2004

In this paper, we investigate and analyze the problems encountered in frame-based estimation of TDOA(Time Difference of Arrival) using CPSP function. Spectral leakage occurring in framing of a speech signal by a rectangular window makes estimation of CPSP spectrum inaccurate. Framing with a Hamming window to reduce the spectral leakage effect distorts the signal due to the different weighting at temporally same sample, which make the TDOA estimation using CPSP function inaccurate. In this paper, we solve this problem by reducing the dynamic range of the spectrum of a speech signal with preemphasis. Experimental results confirm that the framing of pre-emphasized microphone output with a rectangular window shows higher success ratio of TDOA estimation than any other framing methods.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3049-3051
• /
• 2005

본 논문은 UWB(Ultra Wide Band) 펄스 기반의 단일 송수신을 통한 근거리 무선측위 시스템 및 방법에 관한 것으로서, UWB 펄스의 높은 시간 분해능을 이용하여 근거리에서 높은 정밀도를 가지고 태그의 위치를 획득할 수 있다. 특히, 마스터-슬레이브 형태로 구성된 비콘(beacon)들 간의 사전 설정을 통해 마스터 비콘과 무선측위 대상인 태그 사이의 단일 송수신만으로 ToA(Time of Arrival) 및 TDoA(Time Difference of Arrival) 기법을 적용할 수 있도록 하며, 이로써 태그의 신호 송신을 최소화하여 태그의 저전력 동작을 가능케하는 UWB기반 단일송수신을 통한 근거리 무선측위 시스템이다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.154-159
• /
• 2019

When measuring the radiating noise of an underwater moving source, the range information between the acoustic source and the receiver is an important evaluation factor, and the measurement standards such as a receiver position, a moving source depth and a speed are set. Although there is a method of using the cross correlation as a method of finding the range of the underwater moving source, this method requires a time synchronization process. In this paper, we proposed the method to estimate the range by comparing the Doppler frequency difference of the theoretically calculated multipath signal with the Doppler frequency difference of the multipath signal estimated from the received signal. The proposed method does not require a separate time synchronization process. Simulations were performed to verify the performance, and the ranging error of the proposed method reduced by about 95 % than that of the conventional method.