• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.33-35
• /
• 2007

This paper studies on operating limit curve of low voltage electric machinery with respect to source voltage variation or sag. Also, it discusses electric machine and compensation equipment design methodology based on voltage quality effect assessment technology. Voltage quality standards, such as SEMI47, CBEMA, ITIC curve are regarded to examine the relation between time constants of load and sagging time of sag generator, the load(low voltage electric machinery) study. Voltage sag characteristics of loads, time constant and sag relation voltage-time operating limits are tested and verified.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.47-55
• /
• 2004

본 논문에서는 이동 통신망에서의 향상된 시간 기반의 위치 갱신 방법을 제안하고 제안된 방법의 성능을 분석하였다. 분석에서는 포아송 분포의 호 도착시간을 가정하였고, 지수분포의 셀 체류시간을 가정하였으며 분석결과로서는 제안된 방법에서의 최적의 갱신주기를 구하였다. 부가적으로 갱신주기의 값의 변화에 따른 비용의 특성을 관찰하고자 갱신주기의 값이 0 또는 무한대로 근접할 경우에 대하여 위치관리 비용을 분석하였다. 제안된 위치갱신방법과 기존에 제안된 오리지날 시간 기반의 위치갱신방법과의 비교를 위하여 오리지날 시간 기반의 위치갱신 방법에 대한 분석도 수행하였다. 두 방법에 대한 비교에서 제안된 방법이 주어진 환경에서 성능이 향상됨을 알 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.99-99
• /
• 2020

The frequency and scale of domestic flood damage continues to increase, but the criteria for responding to flood damage have not been established. To this end, research is underway to estimate the amount of rainfall in each region so that it can be used to respond to flood damage. The limit rainfall is defined as the cumulative maximum rainfall for each duration that causes flooding, and this research purpose to improve the threshold rainfall by estimating the damage based on the damage history in units of 5 years and analyzing changes over time. The limit rainfall based on the damage history was estimated by using the NDMS past damage history of the Ministry of the Interior and Safety and the rainfall minutes data of AWS and ASOS. The period for estimating the limit rainfall is 2013 ~ 2017, 2015 ~ 2019, and the limit rainfall is estimated by analyzing the relationship between the flood damage history and the rainfall event in each period. Considering changes in watershed characteristics and disaster prevention performance, the data were compared using 5-year data. As a result of the analysis, the limit rainfall based on the damage history could be estimated for less than about 10.0% of the administrative dongs nationwide. As a result of comparing the limit rainfall by period, it was confirmed that the area where the limit rainfall has increased or decreased This was analyzed as a change due to rainfall events or urbanization, and it is judged that it will be possible to improve the risk criteria of flooding.

• 화약ㆍ발파
• /
• 제31권2호
• /
• pp.50-58
• /
• 2013

발파공사 현장 주변에는 많은 종류의 보안물건이 존재하고 있어 발파진동의 영향을 저감하기 위해 각 기관별로 발파진동 허용기준을 제시하고 있다. 그러나 현재 적용되고 있는 발파진동 허용기준은 지나치게 강화 적용하여 공사비 증가와 공기 연장의 폐해가 발생하고 있는 실정이다. 본 연구에서는 기존 설계와 시공사례 등을 토대로 적용된 발파진동 허용기준을 검토하고 그 문제점을 분석하여 합리적인 발파진동 허용기준을 산출하는 방법을 제안하고자 한다.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.45-50
• /
• 1990

A replacement policy with repair cost limit is discussed. When a system fails, the repair cost is estimated by inspection and repair is then undertaken if the estimated cost is less than a predetermined limit L ; otherwise the system is replaced. After repair, the system is as good as new with probability(l-p) or is minimally repaired with probability p. It is assumed that repair cost can not be estimated exactly because of inspection error. When the failure time follows a Weibull distribution and repair cost a normal distribution, the value of repair cost limit minimizing the expected cost rate is shown to be finite and unique.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.52-60
• /
• 2018

The winding of the motor stator coil is broken due to external stress and various factors. If the proper current is not injected when interturn fault(ITF) occurs, the fault can easily be expanded and the motor can be finally destroyed, resulting in many problems with time costs and safety. In this paper, the power loss limit concept, which is the inherent durability of each motor, is applied to secure safety by controlling the total power loss of the motor within the limits. So, we propose an algorithm that can control maximum torque per minimum power loss based on constant torque curve and power loss limit. To verify the proposed method, the simulation and experimental results with an Interior permanent magnet synchronous motor(IPMSM) having an ITF are shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.384-386
• /
• 2006

This paper deals with tests on the reactive power output limit and the Over-Excitation Limiter (OEL) dynamics of generation unit. The suggested reactive limit test methods can identify the allowable maximum/minimum reactive power at 100% rated MW in the steady-state operation condition. The on-line OEL limit test method can identify the time characteristics of OEL with the generation output at 50% of the rated MW. These methods are validated by applying to Yang-Yang Pumped storage units of 282 MVA.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.603-608
• /
• 2008

It is well known that the topology optimization for plastic problem is not easy since the iterative analyses to evaluate the objective and cost function with respect to the design variation are very time-consuming. The finite element limit analysis is an efficient tool which is possible to predict collapse modes and sequential collapse loads of a structure considering not only large deformation but also plastic material behavior with moderate computing cost. In this paper, the optimum topology of a structure considering large and plastic deformation is obtained using the finite element limit analysis. To verify the constructed optimization code, topology optimizations of some typical problems are performed and the optimal topologies by elastic design and plastic design are compared.

• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.265-271
• /
• 2013

Prestressed concrete cylindrical pipe (PCCP) has been widely used for the distribution of water in communal, industrial, and agricultural systems for a long time. However, as it deteriorates, structural failures have been experienced. Replacing the entire existing PCCP with partial damages is not an economical method. Currently, as a cost effective repairing method, a new approach using fiber reinforced polymer (FRP) has been applied. A new design procedure of this method was proposed considering various kinds of loading condition. However, it is not easy to apply this method for design purpose due to its complex procedures. The objective of this study is to provide a new design criteria and process for PCCP rehabilitation with FRP. Through this method, the appropriate quantities of FRP layers will be decided after examining of limit states of deteriorated PCCP. For this purpose, two deterioration conditions are assumed; fully deteriorated and partially deteriorated. Different limit states for each case are applied to decide the quantities of attached FRP. The concept of "margin of safety" is used to judge whether the design results are within the optimal ranges to satisfy all limit states.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.31-37
• /
• 2002

This paper presents a new motion control strategy for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. This paper aims at the development of a new efficient method to control robot motion near and at singularities. The proposed method has focused on generating the optimal joint trajectory for a Cartesian end-effector path within the speed limit of each joint by using the speed limit avoidance as well as the acceleration/deceleration scheme. The proposed method was verified using MATLAB-based simulations.