• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.294-299
• /
• 2007

For efficient and accurate diagnosis of ultrasound images, appropriate time gain compensation(TGC) and dynamic range(DR) control of ultrasound echo signals are important. TGC is used for compensating the attenuation of ultrasound echo signals along the depth, and DR controls the image contrast. In recent ultrasound systems, these two factors are automatically set by a system and/or manually adjusted by an operator to obtain the desired image quality on the screen. In this paper, we propose an algorithm to find the optimized parameter values far TGC and DR automatically. In TGC optimization, we determine the degree of attenuation compensation along the depth by dividing an image into vertical strips and reliably estimating the attenuation characteristic of ultrasound signals. For DR optimization, we define a novel cost function by properly using the characteristics of ultrasound images. We obtain experimental results by applying the proposed algorithm to a real ultrasound(US) imaging system. The results verify that the proposed algorithm automatically sets values of TGC and DR in real-time such that the subjective quality of the enhanced ultrasound images may be sufficiently high for efficient and accurate diagnosis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1610-1617
• /
• 1988

In this paper, a robust discrete-time adaptive control with compensation is proposed for single-input single-output discrete-time plants which have unmodeled dynamics. The stability of the overall system is studied using the conic sector stability theorems when a normalized constant gain parameter adaptation algorithm and a properly chosen compensation are used. An illustrative exmple shows that this compensation can also increase the parameter adaptation speed. And a method of compensation using the adaptive observation is also discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1104-1111
• /
• 2003

The paper presents an algorithm for the compensation of gain and phase imbalances to exist between I-phase and Q-phase signal at direct conversion receiver. We propose a gain and phase imbalances blind equalization compensation algorithm by using variable step-size adaptive loop at direct conversion receiver. The blind equalization schemes have trade-off between convergence speed and jitter effect for the compensation of gain and phase imbalance. We propose the variable step-size adaptive loop method, which varies the loop coefficients according to errors, for recovering these problem. By using variable step-size adaptive loops, we propose to speed up the convergence process and reduce the jitter effect and simulation results show that the algorithm compensates signal loss and speeds up convergence time.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.400-406
• /
• 2010

This paper deals with parameter tuning of the Power System Stabilizer (PSS) for 612 MVA thermal power plants in the KEPCO system and its validation in a field test. In this paper, the selection of parameters, such as lead-lag time constants for phase compensation and system gain, is optimized using linear and eigenvalue analyses. This is then verified through the time-domain transient stability analysis. In the next step, the performance of PSS is finally verified by the generator's on-line field test. After the field test, measured and simulated data are also compared to prove the effectiveness of the models used in the simulations.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1161-1166
• /
• 1989

In this paper, a hierarchical state feedback control method is proposed for the optimal tracking of large-scale discrete-time systems with time-delays. The state feedback gain matrix and the compensation vector are computed from the optimal trajectories of the state variables and control inputs obtained hierarchically by the open-loop control method based on the interaction prediction method. The resulting feedback gain matrix and the compensation vector are optimal for the given initial condition. Computer simulation results show that the proposed method has better control performance and fewer second level iterations than the Tamura method.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.15-17
• /
• 2006

This paper presents a new global intensity compensation method for extracting moving object in a visual surveillance system by compensating time variant intensity changes of background region. The method that compensates a little changes of intensity due to time variant illumination change and automatic gain control of camera is called global intensity compensation. The proposed method expresses global intensity change with a mapping table to describe complex form of intensity change while the previous method models this global intensity change with a simple function as a straight line. The proposed method builds the mapping table by calculating the cross histogram between two images and then by selecting an initial point for generating the mapping table by using Hough transform applied to the cross histogram image. Then starting from the initial point, the mapping table is generated according to the proposed algorithm based on the assumption that reflects the characteristic of global intensity change. Experimental results show that the proposed method makes the compensation error much smaller than the previous GIC method

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.29-36
• /
• 2013

In this paper, a new DC offset elimination filter is proposed for an accurate phasor extraction of fundamental frequency component. The proposed method can eliminate a DC offset component which is decayed exponentially. The proposed method uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. Also, the other advantages of the proposed method is that gain compensation or phase compensation is not required after filtering. Simulations using ATP were performed to evaluate the performance of the proposed filter method, and the results were compared to the ones obtained by conventional methods.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.63-71
• /
• 2000

A new type of second-order digital peaking filters for professional-quality digital audio system is proposed whose frequency response can be elaborately controlled throughout the composite structure of a standard band-pass filter and a 0-dB bypass gain. The proposed method for designing the peaking filter uses the Q-compensation technique to prevent the Q-distortion caused by the variation of the gain factor and is reduced into a compact form which is proper to the real-time implementation. Methods are examined for computing its coefficients, which are exact and very straightforward to compute with small amount of the system resources.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.399-402
• /
• 2005

For efficient and accurate diagnosis of ultrasound images, the time gain compensation (TGC) and dynamic range (DR) control of the ultrasound echo signal are important. TGC is for compensating the attenuation of the ultrasound echo signal along the depth, and DR is used to control the image contrast. In this paper, we propose an algorithm for finding the optimized values of TGC and DR automatically. For TGC, the degree of compensation is determined along the depth based on the effective attenuation estimation of ultrasound signal. For DR optimization, we introduce a novel cost function on the basis of the characteristics of ultrasound image, which provides the minimum value at the optimal DR. Experiments have been performed by applying the proposed algorithm to a real US imaging system. The results show that the algorithm automatically can determine the values of TGC and DR in realtime so that the subjective quality of the corresponding US image may be good enough for diagnosis.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.