• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.27-34
• /
• 2012

In this paper, the implementation of high throughput two-dimensional (2-D) $8{\times}8$ forward and inverse integer DCT transform for H.264 is presented. The forward and inverse transforms are represented using simple shift and addition operations. Matrix decomposition and matrix operation such as the Kronecker product and direct sum are used to reduce the computation complexity. The proposed design uses integer computations and does not use transpose memory and hence, the resource consumption is also reduced. The maximum operating frequency of the proposed pipelined architecture is 1.184 GHz, which achieves 25.27 Gpixels/sec throughput rate with the hardware cost of 44864 gates. High throughput and low hardware makes the proposed design useful for real time H.264/AVC high definition processing.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1997

A multi-channel digital GPS receiver has been developed including a RF-to-IF engine (engine 1), a digital signal processing engine (engine 2) with a microprocessor interfacing, and a navigation software. A high speed SiGe heterojunction bipolar transistor (HBT) as a active device has been mounted on chip-on-board (COB) type hybrid ICs such as LNA, mixer, and VCO in RF front-end of the engine 1 board. A 6-channel digital correlator together with a real-time clock and a microprocessor interface has been realized using an Altera Flex 10K FPGA as well as ASIC technology. Navigation software controlling the correlator for GPS signal tracking, retrieval and storing a message retrieval, and position calculation has been implemented. The GPS receiver was tested using a single channel STR2770 simulator. Successful navigation message retrieval and position determination was confirmed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.21-31
• /
• 2014

Singular value decomposition (SVD) has been widely used to identify unique features from a data set in various fields. However, a complex matrix calculation of SVD requires tremendous computation time. This paper improves the performance of a representative one-sided block Jacoby algorithm using a two-dimensional (2D) multi-core system. In addition, this paper explores an optimal multi-core system by varying the number of processing elements in the 2D multi-core system with the same 400MHz clock frequency and TSMC 28nm technology for each matrix-based one-sided block Jacoby algorithm ($128{\times}128$, $64{\times}64$, $32{\times}32$, $16{\times}16$). Moreover, this paper demonstrates the potential of the 2D multi-core system for the one-sided block Jacoby algorithm by comparing the performance of the multi-core system with a commercial high-performance graphics processing unit (GPU).

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.2
• /
• pp.198-210
• /
• 1999

This study is to investigate sleep patterns of rheumatoid arthritis patients through a survey research. The subjects for this study were 97 patients registered in Hanyang University Hospital Rheumatoid Arthritis Center, and the period of data collection was from July 15, 1998 to August 30, 1998. The research instruments used in this study were the measures of sleep, pain, and fatigue, and SPSSWIN 8.0 Program was used for data analysis. The research results are as follows ; The patients went to bed between 11 and 12 p.m., but many of them found difficulty in falling asleep within 5 minutes. They woke up quite early at around 4 to 6 o'clock in the morning and remained in bed about 1 hour. Only 39 percent of the subjects reported satisfaction with their sleep. Fifty six percent of the subjects took a nap, generally did in the afternoon and 22.7 percent of them napped for half an hour. They suffered sleep disturbance, but their sleep environments were calm and comfortable, and they turn off the light when they went to sleep. As for the quality of sleep, over 50 percent of the subjects reported not being able to sleep deeply, 30 percent of the subjects woke up frequently during sleep, 60 percent experienced frequent arousal after sleep onset. Over 90 subjects slept for 6 to 8 hours. This shows that even though they had rheumatoid arthritis, the patients remained in bed for a sufficient period of time. They also reported waking up or turning frequently during sleep. The sense of fatigue from sleep disturbance scored a relatively high 35.84 points on average against the possible score of 64 points. Behavior for sleep promotion was very active. Sleep disturbance occurred in proportion to the sense of fatigue and pain, and was negatively correlated with quality of sleep. The pain had positive correlations with the illness duration, sleep disturbance and had a negative correlation with the quality of sleep.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.47-54
• /
• 2004

Up to the present, there have been many works to analyze interconnects on timing aspects, while less works have been done on power aspects. As resistance of interconnects and rise time of signals increase, power consumption associated with interconnects is ever-increasing. In case of clock trees, particularly power consumption associated with interconnects is over 30％ of total power consumption. Hence, an efficient method to compute power consumption of interconnects is necessary and in this paper we propose a simple yet accurate method to estimate dynamic power consumption of interconnects. We propose a new reduced-order model to estimate power consumption of large interconnects. Through the proposed model which is directly derived from total capacitance and resistance of interconnects, we show that the dynamic power consumption of whole interconnects can be approximated, and propose an analytical method to compute the power consumption. The results applying the proposed method to various RC networks show that average relative error is 1.86％ and maximum relative error is 9.82％ in comparison with HSPICE results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.71-78
• /
• 2005

In this paper, we propose a transceiver for noncoherent OOK(On-Off Keying) Ultra Wide Band system based on magnitude detection. The proposed transceiver are designed using 0.18 micron CMOS technology and verified by simulation using SPICE and measurement. The proposed transceiver consist of parallelizer, Analog-to-Digital converter, clock generator, PLL and impulse generator. The time resolution of 1ns is obtained with 125MHz system clocks and 8x parallelization is carried out. The synchronized eight outputs with 2-bit resolution are delivered to the baseband. Impulse generator produces 1ns width pulse using digital CMOS gates. The simulation results and measurement show the feasibility of the proposed transceiver for UWB communication system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.53-57
• /
• 2010

This study proposes the algorithm which drives the powerless without battery. The exiting wire or RF type dosimeter, which is the computation of the real time with battery on the dose radiation exposure, In the Wired dosimeter, it is trouble to need the maintenance and management by periods. Besides, the case of the RF typed dosimeter with battery, it is requested to size bigger and to replace battery frequently and so on. Especially RF typed dosimeter has trouble to need for the embody with large power consumption on the contactless typed dosimeter. As the method for the low power, the study designed to be down the operating clock of the MPC, to improve the efficiency of the rectifier, to eliminate the external memory and the DC-DC converter for the simplification of the circuit We convince our research contributes not only to understand the simplified circuit and miniaturization, but also to help the design and application technology of the powerless dosimeter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.71-78
• /
• 2009

An 8${\times}$8-Gb/s/channel 4-PAM transceiver was designed for high speed memory applications by using 70nm DRAM process with 1.35V supply. An asymmetric 4-PAM signaling scheme is proposed to increase the voltage and time margin of upper and lower eyes in 3-class eye opening. A mathematical basis shows that this scheme statistically reduces 33% of reference noise effect in a receiver. Also, an adaptive pre-emphasis scheme, which utilizes a lone-bit pulse with integrator at the receiver, is introduced to reduce ISI for a simple DRAM channel. In this scheme, an integrating clock timing calibration by using a pre-determined pattern is proposed for the optimum ISI measurement.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.433-448
• /
• 2012

A source-synchronous receiver based on a delay-locked loop is presented. It employs a shared global calibration control between channels, yet achieves channel expandability for high aggregate I/O bandwidth. The global calibration control accomplishes skew calibration, equalizer adaptation, and phase lock of all the channels in a calibration period, resulting in the reduced hardware overhead and area of each data lane. In addition, the weight-adjusted dual-interpolating delay cell, which is used in the multiphase DLL, guarantees sufficient phase linearity without using dummy delay cells, while offering a high-frequency operation. The proposed receiver is designed in the 90-nm CMOS technology, and achieves error-free eye openings of more than 0.5 UI across 9-28 inch Nelco4000-6 microstrips at 4-7 Gb/s and more than 0.42 UI at data rates of up to 9 Gb/s. The data lane occupies only $0.152mm^2$ and consumes 69.8 mW, while the rest of the receiver occupies $0.297mm^2$ and consumes 56.0 mW at the 7- Gb/s data-rate and supply voltage of 1.35 V.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.38-45
• /
• 2018

An integrated cryptographic processor that efficiently integrates ARIA, AES block ciphers and Whirlpool hash function into a single hardware architecture is described. Based on the algorithm characteristics of ARIA, AES, and Whirlpool, we optimized the design so that the hardware resources of the substitution layer and the diffusion layer were shared. The round block was designed to operate in a time-division manner for the round transformation and the round key expansion of the Whirlpool hash, resulting in a lightweight hardware implementation. The hardware operation of the integrated ARIA-AES-Whirlpool crypto-processor was verified by Virtex5 FPGA implementation, and it occupied 68,531 gate equivalents (GEs) with a 0.18um CMOS cell library. When operating at 80 MHz clock frequency, it was estimated that the throughputs of ARIA, AES block ciphers, and Whirlpool hash were 602~787 Mbps, 682~930 Mbps, and 512 Mbps, respectively.