• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.383-389
• /
• 2013

Demand for high-rising building has arisen. However, its maintenance is usually executed by labour. It could have a severe problem. We proposed a gondola robot to solve it. In this paper, we designed a height estimation sensor for this gondola. It is consist of pan-tilt unit, ARS sensor, and laser sensor. The pan-tilt unit keeps the laser sensor to indicate the gravity direction by referencing the ARS. The laser sensor's range is vertical distance from gondola to ground. However, if there is an obstacle under the gondola, the distance includes its height. To filter it out, we apply a Kalman filter for the height estimation. If the estimated height is changed extremely, the filter decides that there is an obstacle. Then, it remembers the height of obstacle. Other extreme changes of height estimations are reflected. The experimental results using the proposed sensor system show detail flow of the height estimation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.780-785
• /
• 2002

As the KOMPSAT-1 satellite can roll tilt up to $\pm$45$^{\circ}$, we have analyzed some EOC images taken at different tilt angles fur this study. The required ground coordinates for bundle adjustment and geometric accuracy, are read from the digital map produced by the National Geography Institution, at a scale of 1:5, 000. These are the steps taken for the tilting angle of KOMPSAT-1 satellite to be present in the evaluation of the accuracy of the geometric of each different stereo image data: Firstly, as the tilting angle is different in each image, the satellite dynamic characteristic must be determined by the sensor modeling. Then the best sensor modeling equation is determined. The result of this research, the difference between the RMSE values of individual stereo images is due more the quality of image and ground coordinates than to the tilt angle. The bundle adjustment using three KOMPSAT-1 stereo pairs, first degree of polynomials for modeling the satellite position were sufficient.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.524-528
• /
• 2016

Eddy current (EC) sensor works based on the electromagnetic induction principle and has been widely applied in the industrial testing and evaluation due to its robustness and environmental adaptability. Meanwhile, tilt angle measurement is mainly based on the laser or visual method, which is strict with the measurement environment and not suitable for the industrial applications. In this paper, a novel tilt angle measurement method based on arrayed EC sensors is proposed. Both the simulation and experiments indicate that the measured error is approximately linear with tilt angle and the accuracy after compensation is $0.25^{\circ}$. In conclusion, this research cannot only broaden the scope of EC application, but also overcome the shortcomings of existing angle measurement methods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.330-333
• /
• 2003

In this thesis. the application of the synchronizing control of the intelligent indoor lift system is showed. The separate axes of the indoor lift system are driven independently. PID controller, synchronous flexible logic compensating method and tilt sensor are applied to enhance the performance of the intelligent indoor lift system. the tilt sensor senses the horizontal error of the whole system. PID controller and synchronous flexible logic are used to compensate the synchronous errors of both the separate axes and whole system to be zero. Namely, using not the hardware coupling but the software algorithm. the indoor life system is operated without the error. Before applying the real system, the simulation using matlab testifies the possibility of the lift system. And the realization of the system is demonstrated with two DC servo motors. In the experiment test, flexible logic to compensate the synchronous error is chosen by the comparative method. the indoor lift system has to be considered the loading factor as the disturbance. Because the intelligent indoor lift system is developed to support the patients who don't change for themselves to move. finally, the system which considers the weight of the patient as the disturbance can carry the patients safely without synchronous and position error.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.39-45
• /
• 2007

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives at the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. The relative position information between the spreader and a container using the laser range finder and tilt sensor is estimated through the geometrical analysis.

• 한국지능시스템학회논문지
• /
• 제17권6호
• /
• pp.786-791
• /
• 2007

보안이 중요시되는 공간에서 임의의 사람을 추적하고 인식할 수 있는 시스템의 필요성이 점차 중요시되고 있다. 본 논문에서는 wide-area를 감시하기 위해 음원과 Pan-Tilt 카메라를 이용하여 침입자 추적 시스템을 구현하고자 한다. 먼저 음원추적 센서를 이용하여 음원의 방위를 검출한 후 Pan-Tilt 카메라를 방위 방향으로 이동시키고 이동된 Pan-Tilt 카메라로부터 기준영상을 추출한 후 일정 기준 시간마다 영상을 다시 획득하여 차 영상과 검출결과를 얻어 침입자를 추적하여 감시 시스템을 구현한다. 본 논문에 의해서 구현된 시스템은 흠 네트워크 보안 시스템과 연동을 하여 가정이나 공공시설 보안에 대한 인터페이스 역할을 할 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.201-206
• /
• 2016

비상체가 자세를 유지하기 위한 자세기준에는 비상체의 무게중심을 지나 서로 직교하는 3축을 취하는데 그것을 각각 롤(roll)축, 피치(pitch)축, 요(yaw)축 이라 부른다. 자세측정 장치는 이 3축에 대한 변동을 검출하는 센서이다. 본 논문에서는 HMD에 자세측정 장치를 부착하고. 이동로봇플랫폼에 팬틸트를 장착하여 카메라를 제어한다. 가속도센서는 진동에 매우 취약하기 때문에 센서데이터에 노이즈가 심하게 발생하며, 센서데이터를 매핑(mapping)하는 과정에서 데이터들의 간격이 많이 벌어지는 문제도 발생한다. 이러한 문제점을 해결하기 위해 평균필터와 Cosine Interpolation을 적용하여 팬틸트 동작을 방해하는 요소를 제거하였다. 제안한 성능을 평가하기 위해 실외환경에서 HMD에 부착한 센서데이터를 원격으로 전송하여 이동로봇에 탑재된 팬틸트 카메라를 제어하였다. 실험결과 약간의 지연은 발생하였으나 비교적 안정하게 팬틸트 카메라가 제어됨을 확인할 수 있었다. 또한, 이동로봇은 평지나 경사면 등 어떠한 지형에서도 주행이 가능함을 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1379-1380
• /
• 2010

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.73-79
• /
• 2005

The characteristics of a tilt sensor utilizing the resistance change of an electrolyte associated with inclination is investigated, and a dynamic compensation modeling is proposed to make the real-time measurement of the absolute slope possible even with sporadically dynamic motion. Although the proposed system is small, economical and accurate for quasi-steady slope measurement, since it contains a freesurface the evolution of the liquid surface that has no direct relation to the real slope must be excluded for any rapid rotations or translations. For various artificial motions the response of the sensor is analyzed and simplified modeling equations are proposed.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.379-385
• /
• 2012

본 연구는 당직항해사의 해상상황 인식개선을 위해 시각적 항해보조 장비를 개발하고 그 성능시험 결과를 분석하였다. 개발된 장비는 영상신호를 발생하는 복합영상센서, 거리를 탐지하는 레이저 거리측정부, 팬틸트부, 중앙제어장치부로 구성된다. 개발된 장비의 Pan/ Tilt 내부에 고성능 영상 센서와 레이져 거리 측정기를 장착하고 있다. 실선 실험을 위하여 선박에 개발된 장치를 설치하고 연안 항해중 위해 요소를 관측하여 나타난 화상을 분석함으로써 그 해상상황 인식 개선성능을 평가하였다. 그 결과로 쌍안경에 비교하여 보다 더 명료한 물표의 인식과 해상상황을 포착할 수 있었다.