• Journal of Korean Academy of Rural Health Nursing
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2020

Purpose: The purpose of this study was to examine the effectiveness of smartphone use to enhance self-efficacy and decrease loneliness in elders through communication using the SNS Program Methods: Participants in this study were assigned to the experimental group (25) or control group (25). Data were collected from June 3 to July 12, 2019. For this study, the communication Program through SNS was run once for a total of 12 sessions. All data were analyzed using SPSS version 18.0 program, 𝑥² test, t-test, Repeated Measure ANOVA and Fisher's exact test. Results: It was found that H1 was supported (z=-4.12, p=.005) as "the experimental group participating in the communication Program through SNS had greater self-efficacy than the control group". H2 was supported as "the experimental group participating in the communication Program through SNS had less loneliness than the control group", (z=3.20, p<.001). Conclusion: This basic information may be used as an intervention on communication Program through SNS. Findings suggest the necessity of improving self-efficacy and reduction of loneliness through an intervention communication Program through SNS.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.178-187
• /
• 2009

Six Sigma emphasizes KPI and establishes the present level as well as the goal level through statistical calculation and tries to achieve management innovation through process improvement. But in the area of new product development or service, sufficient data for statistical measurement may not be secured. On the other side, looking for contradictions through problem analysis, TRIZ is a methodology that stresses the process of solving these problems. TRIZ also has its own problems: it is hard to define its initial task, to objectify the measurement of effect, and to optimize the drawn out idea. The purpose of this report is to give a comprehensive understanding about each methodology (Sigma Six and TRIZ) through its analysis, to confirm the need of linking both methodologies, and to suggest a model for this linking process. Also, they will be verified through examples, and the synergy effect will be discussed.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.173-188
• /
• 1996

The purpose of this study is to present the form of Korean policeman's headgear which is endowed with traditional Korean characters and a creative property that has distinctive from other headgears. The investigation was carried out through the researh of policeman's headgears in foreign countries such as United Kingdom France Belgium Italy germany and Japan. The dom-estic investigation was carried out through the Focused Group Interview and analysis on the domestic policeman's service and headgear. Lastly the research into the characteristic of Korean traditional headgear's from was carried out. Consequently two types of policeman's head-gear hat and cap were newly developed and the system of practical use was suggested. The results of this study were as follows: 1. Through the use of traditional and formal elements of Korean ancient headgears korean policeman's headgears were improved in distinc-tion and dignity. 2. Through the use of unisexual form police-man's headgears were improved in uniformity. 3. Through the use of transformal accessories policeman's headgear were improved in simplified system. 4. Through the use of newly formed and lighten weighted materials policeman's head-gears were improved in functionability.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1044-1053
• /
• 2003

There are two major differences between the centerless infeed grinding process and the centerless through-feed grinding process. One is an axial movement of workpieces, and the other is that several workpieces are ground simultaneously and continuously by through-feeding. Because of these differences, through-feed ground parts inherently possess not only the roundness error but also the tapering error. The aims of the research reported in this paper are to examine this inherent tapering characteristic and to find the effects of grinding variables (center height angle, regulating wheel tilt angle, and shape of grinding wheel surface). To accomplish the objectives, experiments were carried out using two types of cylindrical workpiece shapes. Also, computer simulations were performed using the 3-D through-feed grinding model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.879-884
• /
• 2003

This paper is to experimentally investigate the effect of the through-flow and grazing-flow on the absorption performance of a perforated plate system. The experiment is performed through the systematic change of the through-flow velocity, grazing-flow velocity, incident sound pressure level, and the geometrical parameters such as the porosity and hole diameter. From the experimental results, it is found that for the nonlinear relationship between the acoustic resistance and incident sound pressure level there is no influence of the through-flow on the absorption performance, but fur the linear relationship between them there is a strong dependence of the absorption performance on the through-flow velocity. It is also shown that the absorption performance is controllable by changing the porosity and hole-diameter in size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.99-102
• /
• 1999

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate signal delay, feed-through voltage and image sticking. To improve these problems which are caused by the fried-through voltage, we have evaluated new driving methods to reduce the fled-through voltage. Two level gate-pulse was used for the gate driving of the cst-on-common structure pixels. And two-gate line driving methods with the optimized gate signals were applied for the cst-on-gate structure pixels. These gate driving methods were better feed-through characteristics than conventional simple gate pulse. The evaluation of the suggested driving methods were performed by using a TFT-LCD array simulator PDAST which can simulate the gate, data and pixel voltages of a certain pixel at any time and at any location on a TFT array. The effect of the new driving method was effectively analyzed.

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.325-334
• /
• 2020

This paper aims to evaluate the interfacial stress concentrations on connection between vertical through-plate and H-beam in CFT column. Full-scale experiments were performed on three specimens with varying thickness of the vertical through-plate to investigate the interfacial stress concentration factor in the connections. The specimens underwent brittle failure at the location where the steel beam is connected to the vertical through-plate before the steel beam reached its plastic moment. The strain data of the part were analyzed, and the sectional analyses were conducted to determine appropriate residual stress models. In addition, the stress concentration factor was quantified by comparing the analytical local behavior in which the stress concentration is not reflected and the experimental data reflecting the stress concentration. The results showed that the maximum reduction of the stress concentration factor due to an increase in the thickness of the vertical through-plate is 50.3%.

• Journal of Engineering Education Research
• /
• v.15 no.6
• /
• pp.98-102
• /
• 2012

This paper diagnose subjects and measures the learning ability of students based on the goal of developing an assessment tool for education productivity based on multi-aspect evaluation conducted by ICEE at Honam University. Furthermore, develop an assessment tool for education productivity that provides a motive to bring detailed improvements in teaching methods through the diagnosis. In addition, a method for compensating the issues and improving the quality of subject is suggested to develop learning ability of students through applying the assessment tool. An integrated operated system of CQI is desired to be built along with quality improvement of education through measuring academic quality by studying the methods for enhancing academic and learning ability achievement from analysis of the curriculum provided in the "ABEEK program". Through this study the current state of education productivity is presented through analyzing the difference between students who participated in the "ABEEK program" and who did not participate, and operating a comparison between the student's comprehension on their majors and liberal arts by the multi-aspect evaluation that has been conducted for 2 years.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.475-483
• /
• 2018

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2011

This paper examined the kinds and characteristics of leather and also analyzed the expression techniques and characteristics of leather in contemporary fashion. The objective of this study lies in re-interpreting the current location of leather in contemporary fashion design, enlarging unlimited potential expression fields of leather, and at the same time, helping create new viewpoints and expression types of leather. For this purpose, this paper examined the kinds and characteristics of leather through the existing literatures, and it also carried out positive analysis of the expression techniques and characteristics of leather clothes through local and foreign fashion magazines and collection papers, such as Gap, Vogue, and Mode & Mode, focusing on the works presented in the fashion collections after 2000. Leather in contemporary fashion is expressed in different colors through dyeing. Through various expression techniques such as wrinkles, ruffle, stitch, embossing, quilting, patchwork, holing, nailing, cutting, laser cutting, fringe, weaving, printing, and collage, leather breaks the fixed ideas of itself and further, it makes the images of fashion design affluent. Leather clothes, which are made through various expression techniques, have some characteristics. First, leather clothes emphasize women's voluptuous beauty. Second, leather clothes create a decorative effect through mixture of materials and various expression techniques. Third, through the feel of materials and the emphasis of shapes, primitive beauty is expressed.