• Journal of Sensor Science and Technology
• /
• v.12 no.5
• /
• pp.218-224
• /
• 2003

The devices of n-channel poly silicon thin film transistors(TFTs) hydrogenated by plasma, $H_2$ and $H_2$/plasma processes are fabricated. The carriers sensitivity characteristics are analyzed with voltage bias stress at the gate oxide. The parametric sensitivity characteristics caused by electrical stress conditions in hydrogenated devices are investigated by measuring the drain current, threshold voltage($V_{th}$), subthreshold slope(S) and maximum transconductance($G_m$) values. As a analyzed results, the degradation characteristics in hydrogenated n-channel polysilicon thin film transistors are mainly caused by the enhancement of dangling bonds at the poly-Si/$SiO_2$ interface and the poly-Si grain boundary due to dissolution of Si-H bonds. The generation of traps in gate oxide are mainly dued to hot electrons injection into the gate oxide from the channel region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1153-1158
• /
• 2006

The classification of the background and cell areas is very important research area because of the ambiguous boundary. In this paper, the region of cell is extracted from an image of uterine cervical cytodiagnosis using the region growing method that increases the region of interest based on similarity between pixels. Segmented image from background and cell areas is binarized using a threshold value. And then 8-directional tracking algorithm for contour lines is applied to extract the cell area. First, the extracted nucleus is transformed to RGB color that is the original image. Second, the K-means clustering algorithm is employed to classify RGB pixels to the R, G, and B channels, respectively. Third, the Hue information of nucleus is extracted from the HSI models that is the transformation of the clustering values in R, G, and B channels. The backpropagation algorithm is employed to classify and identify the normal or abnormal nucleus.

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.345-349
• /
• 2017

The effects of electron beam(EB) irradiation on the electrical and optical properties of InGaZnO(IGZO) thin films fabricated using a sol-gel process were investigated. As the EB dose increased, the electrical characteristic of the IGZO TFTs changed from semiconductor to conductor, and the threshold voltage values shifted to the negative direction. X-ray photoelectron spectroscopy analysis of the O 1s core level showed that the relative area of oxygen vacancies increased from 14.68 to 19.08 % as the EB dose increased from 0 to $1.5{\times}10^{16}electrons/cm^2$. In addition, spectroscopic ellipsometer analysis showed that the optical band gap varied from 3.39 to 3.46 eV with increasing EB dose. From the result of band alignment, it was confirmed that the Fermi level($E_F$) of the sample irradiated with $1.5{\times}10^{16}electrons/cm^2$ was located at the closest position to the conduction band minimum(CBM) due to the increase of electron carrier concentration.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.397-406
• /
• 2013

Wetland conservation plan has been established to protect ecologically important wetlands based on vegetation integrity, spatial distribution of endangered species, but recently more demands are concentrated on the landscape ecological approaches such as topological relationship, neighboring area, spatial arrangements between wetlands at the broad scale. Landscape ecological analysis and graph theory are conducted to identify spatial characteristics related to core nodes and weak links of wetland networks in Nakdong basin. Regular planar model, which is selected for wetland networks, is applied in the Nakdong basin. The analysis indicates that 5 regional groups and 4 core wetlands are extracted with 15km threshold distance. The IIC and PC values based on the binary and probability models suggest that the wetland group C composed of main stream of Nakdong river and Geumho river is the most important area for wetland network. Wetland conservation plan, restoration projected of damaged and weak links between wetlands should be proposed through evaluating the node, links, and networks from wetlands at the local to the regional scale in Nakdong basin.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.139-152
• /
• 2009

According to the third study on the distribution of chemical substances carried out by the Department of Environment in 2006, there were a total of 900 chemical substances whose respective annual usage amount exceeded 1,000 tons and, among them, 90 substances belonged to the 168 hazardous substances requiring management(53.6%). The work-related illnesses caused by hazardous substances requiring management in Korea between $1992{\sim}2005$ can be classified into four groups depending on the type of the chemical substances. These four groups are 23 organic substances including benzene, 12 metals including lead, 3 acids and bases including hydrogen chloride, and 6 gaseous substances including carbon monoxide. These hazardous substances requiring management were again classified depending on the threshold limit values. The chemicals whose TLV was lower than or equal to 0.005 ppm included 4 organic substances including methylene bisphenyl isocyanate and toluene-2,4-diisocyanate (TDI). The chemicals whose TLV was larger than 51 ppm included 22 organic substances including diethyl ether and 1,2-dichloroethylene. When we classified these hazardous substances requiring management according to the categories of GHS health hazards, we found that isobutyl acetate and magnesium oxide didn't belong to the 13 health hazard categories. Among the substances whose TLV is set and whose annual usage amount is more than 0.1 million ton, we recommended 12 chemical species including 4,4'-Methylenedianiline as new hazardous substances requiring management. All the recommended substances were found to be hazardous when we classified their health hazards.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.711-716
• /
• 2012

The purpose of this study was to investigate how the modulation method affects the effectiveness of eliciting tactile sensations by electrical stimulation. Two methods were employed and the results were compared and analyzed; pulse amplitude modulation (PAM) and pulse width modulation (PWM). Thirty-five healthy subjects participated in the experiments to measure the stimulation intensity that began to elicit a tactile sensation - activation threshold (AT). Constant-current monophasic rectangular pulse trains were employed, and the stimulation intensity was varied from zero until the subject felt any uncomfortable sensation. The step size of the stimulation intensity was 100nC/pulse. After each experiment, the subject described the sensation both quantitatively and qualitatively. The two modulation methods did not make a significant difference as far as the AT values were concerned, but most of the subjects showed 'intra-individual' consistency. Also, it was confirmed that our range of the stimulation parameters enabled us to obtain three major tactile sensations; tickling, pressure and vibration. The results suggested that the stimulation parameters and the modulation type should be selected for each individual and that selective electrical stimulation of the mechanoreceptors needs more diversified researches on the electrode design, multi-channel stimulation protocol, waveforms of the pulse train, etc.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.15-21
• /
• 2005

In this study, the utilization of coal-ash and phosphogypsum was considered as the evapotranspiration final landfill cover(ET cover) material. Cover material considered was the mixture of the weathered granite soil, coal-ash and phosphogypsum and so we sequentially performed the leaching test, column test and field model test to investigate the environmental effects of mixtures of coal-ash and phosphogypsum. In the leaching test, all materials had lower heavy metal concentration than the regulated threshold values. The column test and the review of related regulations were carried out to determine the optimum mixing ratio(OMR) and OMR was soil(4):coal-ash(1): phosphogypsum(1) on the volume base, which was applied to field model test. Field model tests were continued from February to June, 2004 in the soil box that was constructed with cement block. It was verified that coal-ash and phospogypsum mixed with soil was safe environmentally and the mixture of both wastes could improve the water retention capacity of cover materials.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.38-45
• /
• 2020

Presently, safety management of facilities is conducted as a site-oriented safety inspection, but depending on the facilities, there are difficulties in access to the site, and the cost and time of inspection are inefficient due to excessive reliance on human resources. Therefore, the necessity of sensor-based safety management is being raised to ensure the safety of the facility at all times, and various studies on sensor safety management are being conducted, but the research on verification of practicality is still insufficient. Therefore, the improvement points were presented through analysis of domestic and international studies, and additional processes for setting sensor attachment location and threshold were derived by analyzing the H city sensor safety management process, and practicality of sensor safety management was verified through sensor data measurement values. It is expected that efficient, sensor-based facility safety management will be possible if clear criteria and ongoing practicality verification for the additional processes presented in this study should be carried out in the future.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.571-581
• /
• 2008

The sea fog occurs frequently in the west coast of Korea in spring and summer. This study focused on the detection of sea fog using MODIS satellite images. We presented a method for sea fog detection based on the homogeneity level between low stratus and sea fog, which was that the top surface of sea fog had a homogeneous aspect while that of low stratus had a heterogenous aspect. The results showed that the both homogeneity of $11{\mu}m$ brightness temperature (BT) and brightness temperature difference (BTD, $BT_{3.7{\mu}m}-BT_{11{\mu}m}$) were available to discriminate sea fog from low stratus. The frequency of difference between BT in fog/stratus area and BT in clear area provided reasonable result. In addition, the threshold values of standard deviations of BT and BTD in the fog/stratus area were applicable to differentiate fog from low stratus.

• Korean Journal of Remote Sensing
• /
• v.24 no.1
• /
• pp.1-16
• /
• 2008

Steam and advection fogs are frequently observed in the Yellow Sea from March to July except for May. This study uses remote sensing (RS) data for the monitoring of sea fog. Meteorological data obtained from the Ieodo Ocean Research Station provided a valuable information for the occurrence of steam and advection fogs as a ground truth. The RS data used in this study were GOES-9, MTSAT-1R images and QuikSCAT wind data. A dual channel difference (DCD) approach using IR and shortwave IR channel of GOES-9 and MTSAT-1R satellites was applied to detect sea fog. The results showed that DCD, texture-related measurement and the weak wind condition are required to separate the sea fog from the low cloud. The QuikSCAT wind data was used to provide the wind speed criteria for a fog event. The laplacian computation was designed for a measurement of the homogeneity. A new combined method, which includes DCD, QuikSCAT wind speed and laplacian computation, was applied to the twelve cases with GOES-9 and MTSAT-1R. The threshold values for DCD, QuikSCAT wind speed and laplacian are -2.0 K, $8m\;s^{-1}$ and 0.1, respectively. The validation results showed that the new combined method slightly improves the detection of sea fog compared to DCD method: improvements of the new combined method are $5{\sim}6%$ increases in the Heidke skill score, 10% decreases in the probability of false detection, and $30{\sim}40%$ increases in the odd ratio.