• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.157-160
• /
• 2011

본 논문에서는 실시간 감시 시스템에서 녹화 도중에 검출된 움직임 벡터를 이용하여 사람의 활동성을 인식하고 분석하고자 한다. 전경에서 블랍(사람)을 검출하는 방법은 기존에 연구했던 차 영상을 이용하였고, MPEG-4 동영상 녹화 시 EPZS(Enhanced Predictive Zonal Search)에서 검출되는 움직임 벡터의 값을 이용하였다. 본 논문에서는 사람의 행동을 크게 세 가지의 {Active, Inactive}, {Moving, Non-moving}, {Walking, Running} 메타 클래스로 분류하고 인식하였다. 각 단계에서는 단계별 임계값을 이용하여 구분하였다. 실험을 위해서 약 150개의 상황을 연출하였으며, 실험 영상에서 각 단계를 구분하는데 약 86% ~ 98% 까지의 높은 인식률을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4292-4307
• /
• 2021

For the research field of night infrared surveillance video, the target imaging in the video is easily affected by the light due to the characteristics of the active infrared camera and the classical ViBe algorithm has some problems for moving target extraction because of background misjudgment, noise interference, ghost shadow and so on. Therefore, an improved ViBe algorithm (I-ViBe) for moving target extraction in night infrared surveillance video is proposed in this paper. Firstly, the video frames are sampled and judged by the degree of light influence, and the video frame is divided into three situations: no light change, small light change, and severe light change. Secondly, the ViBe algorithm is extracted the moving target when there is no light change. The segmentation factor of the ViBe algorithm is adaptively changed to reduce the impact of the light on the ViBe algorithm when the light change is small. The moving target is extracted using the region growing algorithm improved by the image entropy in the differential image of the current frame and the background model when the illumination changes drastically. Based on the results of the simulation, the I-ViBe algorithm proposed has better robustness to the influence of illumination. When extracting moving targets at night the I-ViBe algorithm can make target extraction more accurate and provide more effective data for further night behavior recognition and target tracking.

• 품질경영학회지
• /
• 제28권2호
• /
• pp.39-56
• /
• 2000

${\overline{X}}$ control chart has proven to be an effective tool to improve the product quality. Shewhart charts assume that the observations are independent and normally distributed. Under the presence of positive autocorrelation and severe skewness, the control limits are not accurate because assumptions are violated- Autocorrelation in process measurements results in frequent false alarms when standard control chats are applied in process monitoring. In this paper, Threshold Bootstrap and Moving Block Bootstrap are used for constructing a confidence interval of correlated observations. Monte Carlo simulation studies are conducted to compare the performance of the bootstrap methods and that of standard method for constructing control charts under several conditions.

• International Journal of Advanced Culture Technology
• /
• 제10권2호
• /
• pp.225-232
• /
• 2022

When we drive a vehicle in an IoT environment, there is a problem in that information of car users is collected without permission. The security measures used in the existing wired network environment cannot solve the security problem of cars running in the Internet of Things environment. Information should only be shared with entities that have been given permission to use it. In this paper, we intend to propose a method to prevent the illegal use of vehicle information. The method we propose is to use attribute-based encryption and dynamic threshold encryption. Real-time processing technology and cooperative technology are required to implement our proposed method. That's why we use fog computing's proxy servers to build smart gateways in cars. Proxy servers can collect information in real time and then process large amounts of computation. The performance of our proposed algorithm and system was verified by simulating it using NS2.

• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.217-223
• /
• 2016

In this paper, the movement of a liquid metal droplet in a channel by continuous electrowetting effect is analyzed. The channel is fabricated using two glass substrates and silicone rubber as spacers, and a mercury droplet and dilute sulfuric acid are added into the channel. The droplet is moved according to voltage applied at both ends of the channel through an electrolyte. According to the shape of the droplet and the applied voltage, the velocity of the droplet is changed. The velocity is proportional to the applied voltage and inversely proportional to the length of the droplet, both theoretically and experimentally. Contact angle hysteresis and a meniscus change were also found in the moving state. This implies the existence of a threshold in movement by Laplace pressure difference. The experiment indicated that the sliding angle was inversely proportional to the width of the droplet but that the voltage threshold was proportional to the width.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.152-153
• /
• 2023

선박자동식별장치(AIS)는 데이터의 활용편의성으로 인해 해상교통평가에 많이 사용되어 왔다. 그러나 AIS는 지형물에 의한 전파방해, 도달거리 한계로 인해 거리에 따라 선박위치가 누락되는 문제가 있다. 한편 위성레이더를 이용하면 이러한 문제로부터 자유롭게 광범위한 해양영역에 분포한 선박위치를 파악할 수 있다. 이 연구에서는 합성개구레이더 Sentinel-1 이미지에 단계적으로 임계치를 결정하여 선박을 탐지하는 방법을 제시한다. 제시된 방법은 기존의 이동창 기반 임계치 결정방법에 비해 최대 25배 빠른 탐지 속도를 보였으며, AIS와의 매칭률에서는 유사한 결과를 보였다.

• 한국멀티미디어학회논문지
• /
• 제14권5호
• /
• pp.607-613
• /
• 2011

본 논문에서는 조명과 배경에 강인한 동적임계값을 이용한 손 영상 분할방법을 제안한다. 먼저 시간단위 입력 차영상을 구하여 움직이는 물체에 대한 손의 실루엣을 추출한다 그 후, 추출된 손 실루엣에 해당하는 영상의 R,G,B 히스토그램 분석을 통하여 R,G,B 각각에 대한 임계구간을 동적으로 구한다. 마지막으로 획득된 동적 임계값을 이용하여 영상에서 손영역을 분할한 다음 모폴로지, 연결요소 분석, 플러드필 연산을 이용한 잡음 제거를 수행한다. 실험 결과 본 논문에서 제시하는 기법은 기존의 비전 기술을 통한 손 인식 기법들과 비교하여 별도의 고정임계값을 두지 않고 실행시간에 정확한 임계값을 추출 할 수 있으며, 다양한 배경과 조명에 대해서도 정확하게 손을 분할할 수 있다. 본 연구에서 제안한 기법은 혼합 현실 응용을 위한 사용자 인터페이스로 사용될 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.307-314
• /
• 1999

The potential use of ranging sensors for reducing the occurrence of accidents in real environment is explored by many companies and laboratories. Most of the sensors under investigation utilize the FMCW(Frequency Modulated Continuous Wave) waveforms. The automotive environment presents to the FMCW radar sensor a multitude of moving and fixed targets and the sensor must detect and track only the targets which may pose a threat of collision or passengers accident. The sensor must function accurately in the presence of background echoes generated by moving and fixed targets, ground reflections, atmospheric noises, including rains, fog, and, snow and noise generated within the receiver. False detection of the desired target in this environment may issue false alarms. That may be dangerous to the passenger and the vehicle. A high false alarm rate is totally unacceptable. The false alarm mechanism consists of noise peaks, crossing the threshold and the undesired response of the system to off lane targets which are not potentially hazardous to the radar equipped vehicle. This paper presents an improve technique safety performance for driver-less operation using FMCW radar sensors.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.17-20
• /
• 2002

The methods that track and detect motion field based on image difference of successive images from camera can separate motion field and background effectively, but because of noise and background images getting proper difference images is hard to achieve. In this paper we propose a method that can improve difference image quality significantly. Three step process is used. At the first step, existence of motion field is determined, the second step is finding proper threshold value using 'Contrast Streching' technique which enables us to find proper motion field even in complex images. At last step, remaining noise is removed and motion field is determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1368-1370
• /
• 2000

The automotive environment presents to the FMCW radar sensor a multitude of moving and fixed targets and the sensor must detect and track only the targets which may pose a threat of collision or passengers accident. The sensor must function accurately in the presence of background echoes generated by moving and fixed targets, ground reflections, atmospheric noises, including rains, fog, and, snow and noise generated within the receiver. False detection of the desired target in this environment may issue false alarms. That may be dangerous to the passenger and the vehicle. A high false alarm rate is totally unacceptable. The false alarm mechanism consists of noise peaks, crossing the threshold and the undesired response of the system to off lane targets which are not potentially hazardous to the radar equipped vehicle. This paper presents an improve technique safety performance for driver-less operation using FMCW radar sensors.