• Steel and Composite Structures
• /
• v.25 no.3
• /
• pp.347-360
• /
• 2017

The goal of this study is to fill this apparent gap in the area about vibration analysis of multiwalled carbon nanotubes (MWCNTs) curved panels by providing 3-D vibration analysis results for functionally graded multiwalled carbon nanotubes (FG-MWCNTs) sandwich structure with power-law distribution of nanotube. The effective material properties of the FG-MWCNT structures are estimated using a modified Halpin-Tsai equation. Modified Halpin-Tsai equation was used to evaluate the Young's modulus of MWCNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the MWCNTs wt% range considered. Also, the mass density and Poisson's ratio of the MWCNT/phenolic composite are considered based on the rule of mixtures. Parametric studies are carried out to highlight the influence of MWCNT volume fraction in the thickness, different types of CNT distribution, boundary conditions and geometrical parameters on vibrational behavior of FG-MWCNT thick curved panels. Because of using two-dimensional generalized differential quadrature method, the present approach makes possible vibration analysis of cylindrical panels with two opposite axial edges simply supported and arbitrary boundary conditions including Free, Simply supported and Clamped at the curved edges. For an overall comprehension on 3-D vibration analysis of sandwich panel, some mode shape contour plots are reported in this research work.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.99-105
• /
• 2007

This research is about applying aerial photos to three-dimensional simulation of road design. Instead of existing road design approach using digital map, which inexactly represent some part of topography and landmarks, digital aerial photos are applied to three-dimensional road design to address such inexactness of the map. First of all, ortho-photos are made using aerial photos, and a digital elevation model is created by extracting DEM. Then, by applying the coordinates practically using in planar design to three-dimensional approach, this model will be much helpful in the analyses of road route and viewscape. In addition, through the use of Virtual GIS, many evaluation factors such as urban design, flora, soil, water channel or road shape, flood plan are used for examination, and the effectiveness of applying three-dimensional simulation based on such route design standard is to be reviewed. In this paper, a basic research about three-dimensional design of structures is performed, and through the three-dimensional design, some effective determination to decision-making was carried out. Hereafter, it appears some research regarding environment-friendly construction and design should be followed.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.303-310
• /
• 2021

A method for developing a visual information concept that analogously compares and analyzes macroscopic data changes in a simple form is needed. The development of the visual information concept requires the selection of visualization form, selection of rhetorical effects, and selection of digital expression elements. Among them, an example of a rhetorical effect selection method for effectively delivering visual information to a user is presented. In this study, metaphorical rhetoric, which allows data comparison and analysis from a macroscopic point of view, was selected for stock price analysis by period and industry. We present a two-dimensional three-stage shape change using a dandelion with spreading cockle hair as a metaphor and a three-dimensional three-stage shape change information expression method using a coral peony flower that changes shape and color according to time as a metaphor. Using this rhetorical metaphor, it is possible to compare macroscopic trading changes and stock prices by industry.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.85-94
• /
• 2006

The purpose of this study is to extract typical body shapes of Korean adults based on the three-dimensional Korean anthropometric data measured through 5th national anthropometric survey and to examine the suitability of the 3-D human shape data for the interior packaging. 36 three-dimensional anthropometric variables related to the design of vehicle interior were considered for the appraisal of typical body shapes. Four major factors were extracted by the factor analysis and factor scores were calculated for all subjects. Typical or standard drivers of Korean adults were selected by the minimum deviation criteria for the four factor scores with respect to 5th, 50th, and 95th percentiles, respectively. Typical drivers of Korean adults were visualized by the CATIA-HUMAN program due to the absence of proper application software for three-dimensionally scanned human body data. There are considerable differences between the anthropometric data of Korean adults and those provided by CATIA-HUMAN program, which shows that the modeling data provided by CATIA-HUMAN should not be directly applied to the ergonomic evaluation for the vehicle design. This suggests the necessity for the development of suitable software for scanned human shape data. It is also expected that the anthropometric data of typical drivers extracted from this study help design package layouts and improve the suitability of ergonomic evaluation for Korean customers.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.304-309
• /
• 2000

Growth-strain method was used for shape optimization of general structures. It was verified that the growth-strain method is very effective for shape optimization of solid structures in previous papers, but It could not provide reasonable optimized shape for structures with holes inside. The purpose of this study is to improve the growth-strain method for shape optimization of two- and three- dimensional structures. In order to improve, the problems occurred as the growth-strain method was applied to general structures were examined, and then the improved method was suggested. Finally, an automatic shape optimization system was built up by the improved growth-strain method with finite element method. The effectiveness and practicality of the developed shape optimization system was verified by some examples.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.256-259
• /
• 2009

In order to investigate the effect of strain states attributed to the lubrication during shape rolling, shape rolling for V-sectioned sheets was carried out with and without lubrication. The evolution of strain states during shape rolling was studied by three-dimensional finite element method (FEM). Shape rolling with and without lubrication produces shape-rolled samples in fairly similar outer shapes, since the distribution of normal strain components is nearly independent of the lubrication condition. In contrast, the distribution of shear strain components strongly depends on the lubrication condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.151-158
• /
• 2000

The growth-strain method was used for shape optimization of multi-connected structures. It was verified that the growth-strain method is very effective for shape optimization of structures with only one free surface to be deformed. But it could not provide reasonable optimized shape for multi-connected structures, when the growth-strain method is applied as it is. The purpose of this study is to improve the growth-strain method for shape optimization of multi-connected two- and three- dimensional structures. In order to improve, the problems that occurred as the growth-strain method was applied to multi-connected structures were examined, and then the improved method was suggested. The effectiveness and practicality of the developed shape optimization system was verified by numerical examples.

• Structural Engineering and Mechanics
• /
• v.4 no.5
• /
• pp.569-586
• /
• 1996

A new three-dimensional 8-node solid element with rotational degrees of freedom is presented. The proposed element is established by adding rotational degrees of freedom to the basic 8-node solid element. Thus the element has three translations and three rotational degrees of freedom per node. The corner rotations are introduced by transforming the hierarchical mid-edge displacements which are parabolic shape along an edge. The derivation of the element is based on the mixed variational principles in which the rotations are introduced as independent variables. Several types of non-conforming modes are selectively added to the displacement fields to obtain a series of improved elements. The resulting elements do not have the spurious zero energy modes and Poisson's ratio locking and pass patch test. Numerical examples show that presented non-conforming solid elements with rotational degrees of freedom show good performance even in the highly distorted meshes.

• Journal of The Korean Astronomical Society
• /
• v.46 no.3
• /
• pp.125-131
• /
• 2013

We present the relation between the genus in cosmology and the Betti numbers for excursion sets of three- and two-dimensional smooth Gaussian random fields, and numerically investigate the Betti numbers as a function of threshold level. Betti numbers are topological invariants of figures that can be used to distinguish topological spaces. In the case of the excursion sets of a three-dimensional field there are three possibly non-zero Betti numbers; ${\beta}_0$ is the number of connected regions, ${\beta}_1$ is the number of circular holes (i.e., complement of solid tori), and ${\beta}_2$ is the number of three-dimensional voids (i.e., complement of three-dimensional excursion regions). Their sum with alternating signs is the genus of the surface of excursion regions. It is found that each Betti number has a dominant contribution to the genus in a specific threshold range. ${\beta}_0$ dominates the high-threshold part of the genus curve measuring the abundance of high density regions (clusters). ${\beta}_1$ dominates the genus near the median thresholds which measures the topology of negatively curved iso-density surfaces, and ${\beta}_2$ corresponds to the low-threshold part measuring the void abundance. We average the Betti number curves (the Betti numbers as a function of the threshold level) over many realizations of Gaussian fields and find that both the amplitude and shape of the Betti number curves depend on the slope of the power spectrum n in such a way that their shape becomes broader and their amplitude drops less steeply than the genus as n decreases. This behaviour contrasts with the fact that the shape of the genus curve is fixed for all Gaussian fields regardless of the power spectrum. Even though the Gaussian Betti number curves should be calculated for each given power spectrum, we propose to use the Betti numbers for better specification of the topology of large scale structures in the universe.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1091-1097
• /
• 2011

The SGBEM-FEM alternating method has been known to be a very effective method for analyzing threedimensional cracks in a finite body. The accurate values of the stress intensity factor can be obtained for a general planar or nonplanar three-dimensional crack. In the existing method, eight-noded quadrilateral boundary elements are used to model a crack. In some cases, three-node triangle boundary elements are more convenient for the modeling of a crack with a general shape. In this study, a crack is modeled with three-noded triangular and seven-noded quadrilateral elements by using the advancing-front mesh generation method. The stress intensity factors are obtained for cracks with several shapes and the accuracy of results is examined.