• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1322-1328
• /
• 2009

This paper presents vibration analysis of maskless exposure module in printed circuit board(PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the finite element analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 한국측량학회지
• /
• 제6권2호
• /
• pp.10-18
• /
• 1988

대형구조물의 삼차원위치해석과 변형측정을 하기 위하여 근접사진측량을 이용할 경우 정확도에 가장 큰 영향을 미치는 촬영거리를 접근시켜 다중기법(Multiple Method)에 의해 해석하는 것이 효율적이다. 본 연구에서는 다중방법에서 제기되는 문제점들을 해결하기 위하여 중복도, 기준점 수와 배치, 촬영거리의 변화에 따른 오차의 영향을 분석하여 그 특성을 파악하고자 하였다. 촬영대상으로는 7m$\times$3m의 평면형의 피사체에 총 225점의 말지점을 고르게 배치하고 중복도와 촬영거리를 변화시키면서 총 143교의 사진을 찰영하였다. 이 사진들에 의한 종ㆍ횡스트립과 블럭을 형성, on-line system으로 개발된 프로그램에 의해 해석하였다. 기준점 수를 감소시킴에 따라 기하학적 오차(simulated error)는 계속 증가 하지만 관측오차(a ctual error)는 감소하다가 다시 증가되고 있으며, 촬영거리의 변화에 따른 오차는 Z방향이 X, Y방향보다도 크게 나타났으며 redundancy를 증가시키면 Z도 양호한 결과를 얻을 수 있었다. 그리고 중복도의 증가에 따른 오차는 중복도 70%전후에서 가장 양호한 결과를 얻었다. 본 연구의 결과에 의하면, 피사체의 크기와 형태에 따라 기준점 배치및 중복도를 적절하게 선택하는 것은 대형구조물해석에 무엇보다 중요하며 촬영거리를 가능한 한 피사체에 근접시켜 다중촬영을 실시하여 처리한다면 주요 구조물의 정밀해석은 물론 변형측정에 널리 활용할 수 있을 것으로 기대된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.185-185
• /
• 2011

Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.

• 대한수의학회지
• /
• 제46권3호
• /
• pp.255-261
• /
• 2006

Experimental animals have been used to biological and medical purposes and the animals must be, for these purposes, healthy and clean to microbial infection. However, the animals can be easily exposed to pathogenic microorganism via several routes. Of the routes, environmental conditions are the most important factors to keep the animals healthy and clean, especially air condition. Monitoring of air-condition has been required to keep the animal healthy and clean. However, any guideline is not available for experimental conditions with pigs. Therefore, the sampling times and points were compared in different conditions to establish an optimal protocol for monitoring of air borne bacteria. Tryptic soy agar(TSA), blood agar containing 5% defibrinated sheep blood and Sabraud dextrose agar(SDA) were used as media to capture total bacteria, pathogenic bacteria and fungi, respectively. Two methods, compulsive capture using an air-sampler and capturing fall-down bacteria were used to capture the microorganisms in the air. The points and time of capturing were different at each experiment. Air borne microorganisms were captured at three and five points in the open and closed equipments, respectively. Air was collected using an air-sampler for 1 min and 5 min and the agar plates as open status were left from 30 min to 2hr. At first, we monitored an experimental laboratory which dealt with several pathogenic bacteria and then, a protocol obtained from the investigation was applied to open or close experimental conditions with pigs. Number of bacteria was high from 10:00 to 15:00, especially on 13:30-15:30 but sharply decreased after 17:00. The tendency of the number of bacteria was similar between two methods even though the absolute number was higher with air sampler. Critical difference in the number of cells was observed at 5 min with air sampler and 2 hr with fall-down capturing method. However, 1 min with air sampler and 1 hr with fall-down capturing were the best condition to identify bacterial species collected from the air. Number of bacteria were different depending on the sampling points in closed condition but not in opened condition. Based on our results, a guide-line was suggested for screening air-borne microorganism in the experimental conditions with pigs.

• 대한영양사협회학술지
• /
• 제11권1호
• /
• pp.105-113
• /
• 2005

The purpose of the study was to evaluate the perception of importance about HACCP guidelines of dietitians. A questionnaire was developed to achieve research objectives and sent to random samples of 500 dietitians by a mail ; 418(84%) responses were analyzed. The respondents used three-point-scale to rate their perception of importance about HACCP from 1-"will be necessary" to 3-"very important". All statistical analyses were conducted using SAS package(version 8.12) for Windows. Means and standard deviations were computed for all variables. One-way analysis of variance and Duncan's multiple range test were used to assess differences in the perception of importance about HACCP guidelines among business and industry, health care and school foodservice managers. The study results were summarized as follows. Dietitians especially had lower perception of importance on the contents of Critical Control Points(CCPs), such as; adequate thawing methods and keeping records(1.95) and correct cleaning and sterilizing for raw vegetables and fruits(1.93). The rates of perception of importance about HACCP guidelines were significantly different from 19 of the 37 contents among business and industry, health care and school foodservice(p<.05 or p<.01 or p<.001). Generally, the item related to purchasing and inspection management had the highest perception level score and the item related to pre-preparation management had the lowest perception level score in foodservice production process(p<.001). Results indicate that there is a need for increased education of dietitians about HACCP principles and appropriate practices.

• 분석과학
• /
• 제30권3호
• /
• pp.122-129
• /
• 2017

Methamphetamine addiction is a critical issue due to the lack of effective pharmacotherapy and high potential for relapse. Nevertheless, there are no distinct biomarkers for diagnosis or prognosis for methamphetamine addiction. In the present study, a rat model for methamphetamine self-administration was established and alteration of urinary metabolites by methamphetamine addiction was investigated by the targeted metabolite analysis using mass spectrometry. Rat urine samples were collected at three time points (before and after addiction and after extinction) from the methamphetamine-addicted group as well as the age-matched control group. The collected samples were prepared using AbsoluteIDQ p180 kit and analyzed using flow injection analysis (FIA) - or high performance liquid chromatography (HPLC) - tandem mass spectrometry (MS/MS). The levels of lysine, acetylornithine and methioninesulfoxide were distinctively altered depending on the status of metheamphetamine addiction or extinction. In particular, the level of acetylornithine was reversely changed from addiction to extinction, for which further studies could be useful for biomarker discovery or mechanistic studies for methamphetamine addiction.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.83-91
• /
• 2007

This experiment studied the change in a human's control of his or her static posture by analyzing the stabilogram diffusion and, by using the said study, evaluated the control ability of different groups with different experiences. The postures had a rising requirement of heel-rise according to three conditions: heel-toe, ball, toe; the groups were divided into dance major student and non-dance majors. The results of the critical points according to posture did not show a direct relation with the change in postures that had a rising requirement of heel-rise. The diffusion coefficient(D) had greater stochastic activity for short-term regions that utilize open-loop controls without feedback than for long-term regions that used closed-loop controls with feedback to maintain balance. The directional results of the body undergoing disturbance showed that A/P direction's diffusion coefficient (D) was larger than that of M/L direction. Both feet's planar diffusion coefficients were a linear combination of the diffusion coefficients calculated for the x and y axis. In studying the different abilities to control posture between a dance major student and a non-dance majors, a comparison of open-loop control's diffusion coefficient(D) was effective, and dance major student had superior control ability to that of non-dance majors.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2019-2029
• /
• 2001

Up to now a wide variety of researches on inpipe inspection robots have been introduced, but it still seems to be difficult to construct a robot providing mobility sufficient to navigate inside the complicated configuration of underground pipelines. This paper introduces a robot called MRINSPECT IV(Multifunctional Robotic Crawler for inpipe inSPECTion IV) for the inspection of urban gas pipelines with a nominal 4-inch inside diameter. The proposed robot can freely move along the basic configuration of pipelines such as along horizontal or vertical pipelines. Moreover it can travel along reducers, elbows, and steer in the branches by modulating the speeds of driving modules. Especially, its capability for steering in tile three-dimensional pipeline configuration has a competative edge over the other ones and provides excellent mobility in navigation. Its critical points in the design and construction are introduced and results of experiments are given.

• CRM연구
• /
• 제2권1호
• /
• pp.1-13
• /
• 2009

한 경쟁 시대를 맞아 기업의 기존 고객 유지의 중요성이 강조되고 있는 가운데 여러 분야에서 CRM에 관한 연구가 진행되어 왔다. 본 연구는 기존의 CRM연구들을 고찰하고 이를 통해 CRM의 정의 및 종류를 재정립하여 실무자들을 위한 제언과 학계의 연구자들을 위해 미래 연구방향을 제시하고자 하였다. 1990년 이후의 국내외 연구들을 정리하여 CRM의 과거의 연구과제와, 현재의 위상 그리고 미래 방향 부분으로 나누어서 이슈들을 제시하고자 하였다.

• 미술이론과 현장
• /
• 제10호
• /
• pp.85-103
• /
• 2010

Mona Hatoum and community make unlikely bedfellows. From her beginnings as a teenage exile to her maturity as an internationally celebrated artistic nomad, Hatoum defies classification within any single geographical or cultural community. Attempting, however, to locate specific points of contact between her and certain communities in terms of artist-in-residence projects in which she participated might be a particularly fruitful way of circumventing her notorious critical resistance to identity and her refusal of homogeneity. This paper starts with Miwon Kwon's critique of contemporary practices in community-based art, which locate an essentialising force that isolates a single point of commonality and overlooks authentic differences. It then turns to Jean-Luc Nancy's reconceptualization of community as 'unworked' and 'being-in-common' to provide analytical tools for avoiding the dangers of essentialism. By examining the three residencies that Hatoum accepted in the mid-1990s in the light of Nancy's observations and theories, and by bringing the idea of artistic nomadism and that of community into juxtaposition, we hope to show that Hatoum succeeds in finding an equilibrium between art and community, and that this sheds new light on the issues raised in recent discussions on such relationship.