• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.199-206
• /
• 2003

Because the MIRD phantom, the representative mathematical phantom was developed for the calculation of internal radiation dose, and simulated by the simplified mathematical equations for rapid computation, the appropriateness of application to external dose calculation and the closeness to real human body should be justified. This study was intended to modify the MIRD phantom according to the comparison of the organ absorbed doses in the two phantoms exposed to monoenergetic broad parallel photon beams of the energy between 0.05 MeV and 10 MeV. The organ absorbed doses of the MIRD phantom and the Zubal yokel phantom were calculated for AP and PA geometries by MCNP4C, general-purpose Monte Carlo code. The MIRD phantom received higher doses than the Zubal phantom for both AP and PA geometries. Effective dose in PA geometry for 0.05 MeV photon beams showed the difference up to 50%. Anatomical axial views of the two phantoms revealed the thinner trunk thickness of the MIRD phantom than that of the Zubal phantom. To find out the optimal thickness of trunk, the difference of effective doses for 0.5 MeV photon beams for various trunk thickness of the MIRD phantom from 20 cm to 36 cm were compared. The optimal thunk thickness, 24 cm and 28 cm for AP and PA geometries, respectively, showed the minimum difference of effective doses between the two phantoms. The trunk model of the MIRD phantom was modified and the organ doses were recalculated using the modified MIRD phantom. The differences of effective dose for AP and PA geometries reduced to 7.3% and the overestimation of organ doses decreased, too. Because MIRD-type phantoms are easier to be adopted in Monte Carlo calculations and to standardize, the modifications of the MIRD phantom allow us to hold the advantage of MIRD-type phantoms over a voxel phantom and alleviate the anatomical difference and consequent disagreement in dose calculation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.357-365
• /
• 2009

On the purpose to improve the milling efficiency as well as head-rice percentage after milling, an experiment to improve the removal ability of immature kernels in the immature brown rice separator (IBRS) was performed focused on varietal characteristics. The removal ability of immature grains by the IBRS was absolutely depending on kernel thickness of brown rice. The kernel thickness of the tested rice varieties distributed from 1.79 mm in Nonganbyeo to 2.16 mm in Daeribbyeo 1. Although there were some variation among rice varieties, it was roughly suggested that the suitable sieve-slit widths for good separation of the immature kernels were 1.9 mm for the varieties thicker than 2.08 mm in thickness, 1.8 mm for the varieties with 2.00-2.08 mm thickness, 1.7 mm for the varieties with 1.90-2.00 mm thickness, and 1.60-1.65 mm for the varieties thinner than 1.7 mm. It was found out that the higher the proportions of immature kernels in brown rice, the more conspicuous the improvement of milling efficiency as well as head rice rates by their removals. With increasing the sieve slit-widths beyond an optimum range, the losses of mature grains increased sharply. For effective separation of immature kernels, it was suggested that the optimum sieve-slit width should be set up depending on both of the kernel thickness and the critical loss limit of mature kernel.

• Journal of Life Science
• /
• v.14 no.6 s.67
• /
• pp.975-985
• /
• 2004

This study attempts to investigate the developmental alterations of rat cerebral cortex, and the effects of EGEE on the developmental cerebral cortex in the prenatal, postnatal and adults were examined by morphological methods and H-E staining was used for the histological changes. In the case of injection of EGEE, at 14 day of fetal phase, parietal cortex was thickest $(95{\pm}12.7\;{\mu}m)$ but, it was thinner than in the control group $(102{\pm}14.0\;{\mu}m)$ and, occipital cortex $(57{\pm}10.5\;{\mu}m)$ compared with other cortexes was the thinnest in fetal phase. In the suckling phase, each cortex grew thick quickly but, after weanning phase, the growth of the cortex slowed and the thickness of cortex was similar to that of cortex in the adult phase. At 105 day after birth, the parietal cortex was thickest $(934{\pm}21.6\;{\mu}m)$ but, decreased compared with control group $(1113{\pm}19.0\;{\mu}m)$. When EGEE was injected in intraperitoneal of rat, the number of neuroblasts per unit area was largest $(207.7{\pm}11.4/10^{-2}\;mm$ at the mantle layer of parietal cortex at 14 day of fetal phase but, decreased compared with control group $(224.2{\pm}13.8/10^{-2}\;mm$ , and the size was largest $(7.5{\pm}1.3\;{\mu}m)$ at the ependymal cell layer of occipital cortex at 3 day after birth but, decreased compared with control group $(9.0{\pm}1.2\;{\mu}m)$. Simillar to control group, the number of granular cells and pyramidal cells were largest at the II and III layer of parietal cortex, but decreased during developmental phase. The size was largest at the IV and V layer of occipital cortex but it was decreased compared with control group. When EGEE was injected in intraperitoneal of rat, the cerebral cortex from fetal phase to 3 day after birth has differentiated into the 3 layers; ependymal, mantle and marginal layer, but empty cisternaes or vacoules in the cerebral cortexes and the condensed phases of neuroblasts were appeared. From 5 day after birth, it has differentiated into the 4 layers; molecular, external granular, mixed layer of internal granular, external and internal pyramidal cells and multiformal layer but, empty cisternaes or vacoules in the granular and pyramidal cell layers were appeared and the number per unit area of neuron was decreased. In the cerebral cortex of the weaning and adult phases, division of cell layers was not clear and empty cisternae was formed in the cortex with the cells in external granular and pyramidal cell layers, was magnified or condensed around blood vessels of neurons.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.435-451
• /
• 2016

The objective of the present study was to perform a comparative analysis of the chemical properties of the cultivation site soil and growth characteristics of organically and conventionally cultivated ginseng (Panax ginseng C. A. Meyer). Organically and conventionally cultivated ginseng samples (4-, 5-, and 6-year-old) were collected from 52 fields at 14 locations throughout Korea. The samples were collected over three years from 2013 to 2015, with the collection period between October and November of each year. In order to increase the yield of organically cultivated ginseng, the amount of nutrients was increased to match that of the conventional cultivation system, which highlights the need for proper management in accordance with the standards for chemical properties of soil. Growth duration of organic ginseng was ${\geq}60days$ shorter than that of conventional ginseng and its average yield per 1ha was 60% than that of conventional ginseng. Root weight of organically cultivated ginseng was approximately 54% that of conventionally cultivated ginseng. Rhizome diameter and body shape index of organically cultivated ginseng were lower than those of conventionally cultivated ginseng, indicating that organically cultivated ginseng was thinner and longer than conventionally cultivated ginseng. Root length was greater in 5-year-old conventionally cultivated ginseng with a low percentage of paddy-upland rotation fields. The number of rootlets was lower in 5- and 6-year-old organically cultivated ginseng with a high percentage of direct seeding cultivation. Dry weight was distinctly lower in 5- and 6-year-old organically cultivated ginseng with early defoliation than that of conventionally cultivated ginseng. Incidences of notched belly and root rot tended to be higher in conventional cultivation, with the incidence of notched belly being distinctly higher in 4- and 6-year-old roots and root rot being more prevalent in 5- and 6-year-old roots. Red discoloration and eelworm damage, which are highly affected by soil moisture, were most common in the organically cultivated 4-year-old roots. Organically cultivated ginseng showed early defoliation than conventionally cultivated ginseng, as a result, its yield and weight were low, while the incidence of physiological disorders was low. In order to increase the yield of organically cultivated ginseng, studies on cultivation technology that can overcome early defoliation, as well as soil moisture management that can minimize physiological disorders, are required.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.700-708
• /
• 2012

In order to optimize a method to determine the firmness of Chinese cabbage, hardness of midrib tissues was examined based on their chronological order of emergence. Texture measurement using volodkevich bite jaws gave a consistent and highest regression ($r^2=0.85$) between firmness and the order of leaf emergence, while blade set, cylinder probe, and crisp fracture support rig showed a lower coefficient of determination. Thickness of midrib tissue within an individual head from 16 cultivars of Chinese cabbage was positively correlated with the order of emergence, becoming thinner toward inner leaves. Mean thickness of midrib tissue from the head ranged from 7.74 mm for 'CR-shingshing' and 9.28 mm for 'Norangyeorum'. The covariance of leaf thickness within a head was highly cultivar-dependent, ranging from 23.6% for 'Chihili' and 5.8% for 'Bulam'. Firmness of the midrib tissue, defined as maximum peak height per tissue thickness, became higher from outer to inner leaves, showing $2^{nd}$ order of regression. Mean firmness of the midrib tissue from individual head varied from 1.58 N for 'Rangno' to 3.46 N for 'CR-shingshing'. The $10^{th}$ or $11^{th}$ leaf brought the best correlation coefficient (r = 0.81) between firmness of an individual leaf and the mean firmness of the entire leaves in a head, suggesting a reliable and rapid method to estimate the firmness of a head in lieu of examining all leaves in the head. The relationship between firmness of midrib tissue and dry mass ($r=0.70^{**}$) as well as cell wall content ($r=0.58^*$) of the head were positively correlated. Results obtained from the present study suggested that a new method to determine midrib firmness would enable to clarify the relationship between textural quality of fresh Chinese cabbage and their processed product, 'Kimchi'. It will also be important to apply this method to screen textural quality of various genotypes under breeding programs.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.827-838
• /
• 2006

This experiment was carried out to investigate the effects of dietary vitamin E levels on carcass characteristics and vitamin E contents, fatty acid composition and lipid oxidation as indicated by thiobarbituric acid reactive substances(TBARS) of the longissimus muscle in Hanwoo steers. Forty Hanwoo steers were randomly assigned to one of four groups and fed the diet containing 200(control), 1000, 2000 or 2500 IU a(alpha)-tocopherol acetate/head/day for 3 months of last finishing period. Backfat thickness was thinner and beef fat color was whiter(P<0.05) in steers fed the vitamin E supplemented diets than those fed the control diet. But the longissimus muscle area and yield grade did not differ among treatments. Marbling score and quality grade were higher(P<0.05) in steers fed the diets containing 1000 and 2000 IU vitamin E than those fed the other diets. Vitamin E concentration in the longissimus muscle was higher(P<0.05) as the vitamin E content in diet was higher. The levels of oleic and linoleic acids in the longissimus muscle were not affected by dietary vitamin E levels. But linolenic and arachidonic acids were lower in steers fed the vitamin E supplemented diets than those fed the control diet. TBARS in the longissimus muscle was not affected by the vitamin E levels in diet until 5th day of storage but delayed muscle lipid oxidation in steers fed the vitamin E supplemented diets after 7th day of storage. Therefore according to this result, it may be concluded that steers have a higher quality grade and higher vitamin E concentration in muscle and lower in TBARS when diet contains 1000 or 2000 IU vitamin E per kg of diet.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.4
• /
• pp.62-71
• /
• 2014

Three types of diffuser systems were manufactured and applied to investigate the effect of liquid fertilization of pig manure slurry by application of aeration processes. In the first type reactor, commonly used diffuser system, which diffuse air upward by diffusing aerator fixed at the bottom of the reactor is installed. In case of the second type, air diffuser is installed 10 cm above of the bottom of a reactor. In the third type reactor, the venturi-type air diffuser is installed at circulation pipe, which return pig slurry in the reactor(mixing-in-pipe process). The pig manure slurry separated to solid/liquid was flowed into the experimental reactor, and left as it for one week to precipitate solids. The concentration of organic matter, T-N, T-P and BOD in the raw pig manure slurry flowed into the reactor of bottom-fixed type aeration process were 1.82%, 4,400 mg/L, 360 mg/L and 13,542 mg/L, respectively. After aeration the concentration of organic matters, T-N, T-P and BOD in the slurry were 2.01%, 4,400 mg/L, 420 mg/L and 16,824 mg/L, respectively. The concentration of organic matter, T-N, T-P and BOD in the mixing-in-pipe type changed from 1.58%, 3,700 mg/L, 260 mg/L and 15,735 mg/L to 1.96%, 4,000 mg/L, 340 mg/L, and 18,098 mg/L, respectively. Changes of the concentration of organic matter, T-N, T-P and BOD of the pig manure slurry collected from the middle layers of two aeration reactors; bottom aeration process and the mixing-in-pipe process, were 10.4%, 0%, 16.7% and 24.2% and 24.0%, 8.1%, 30.8% and 15.0%, respectively. The thickness of foam layer generated on the surface of pig manure slurry in aeration tank was thinner in mixing-in-pipe reactor than bottom-fixed type aeration reactor.

• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.273-278
• /
• 2012

Over the last decade, the hafnium-based gate dielectric materials have been studied for many application fields. Because these materials had excellent behaviors for suppressing the quantum-mechanical tunneling through the thinner dielectric layer with higher dielectric constant (high-K) than $SiO_2$ gate oxides. Although high-K materials compensated the deterioration of electrical properties for decreasing the thickness of dielectric layer in MOSFET structure, their nano-mechanical properties of $HfO_2$ thin film features were hardly known. Thus, we examined nano-mechanical properties of the Hafnium oxide ($HfO_2$) thin film in order to optimize the gate dielectric layer. The $HfO_2$ thin films were deposited by rf magnetron sputter using hafnium (99.99%) target according to various oxygen gas flows. After deposition, the $HfO_2$ thin films were annealed after annealing at $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$ for 20 min in nitrogen ambient. From the results, the current density of $HfO_2$ thin film for 8 sccm oxygen gas flow became better performance with increasing annealing temperature. The nano-indenter and Weibull distribution were measured by a quantitative calculation of the thin film stress. The $HfO_2$ thin film after annealing at $400^{\circ}C$ had tensile stress. However, the $HfO_2$ thin film with increasing the annealing temperature up to $800^{\circ}C$ had changed compressive stress. This could be due to the nanocrystal of the $HfO_2$ thin film. In particular, the $HfO_2$ thin film after annealing at $400^{\circ}C$ had lower tensile stress, such as 5.35 GPa for the oxygen gas flow of 4 sccm and 5.54 GPa for the oxygen gas flow of 8 sccm. While the $HfO_2$ thin film after annealing at $800^{\circ}C$ had increased the stress value, such as 9.09 GPa for the oxygen gas flow of 4 sccm and 8.17 GPa for the oxygen gas flow of 8 sccm. From these results, the temperature dependence of stress state of $HfO_2$ thin films were understood.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.219-229
• /
• 1998

The purpose of this study is to define the characteristics of the skeleton and soft tissues of severe adult class III malocclusion. The materials selected for this study were lateral cephalograms of 112 adult class III malocclusion patients with ANB difference below -2 degrees. and the mean age was 22.9 years old. The normal control sampler consisted of lateral cephalograms of 50 adults in normal occlusion and the mean age was 22.1 years old. The Horizontal reference line was FH line and the vertical reference line was nasion perpendicular to FH line. The skeletal and soft tissue characteristics of Class III malocclusion are as follows : 1. In the skeletal profile evaluated by vertical reference line (Nasion perpendicular to FH), the forehead and maxilla was similar to normal, but the mandible was protruded significantly. 2. The soft tissue profile is concave. The thickness of soft tissue covering forehead area and nose is within normal range. but the upper lip is thicker and the nasolabial angle is smaller than normal. The lower lip and inferior labial sulcus is thinner than normal. The degree of eversion of lower lip is lesser than normal. 3. The cranial base of class III malocclusion is shorter and saddle angle is smaller than normal. 4. The location of midface evaluated in relations to cranial base is within normal range but, the length of midface is shorter than normal when compared from the deep portion of the facial skeleton. 5. The location of maxilla in reference to cranial base is within normal range but the length of maxilla was shorter in class III malocclusion. 6. The mandible was protruded, ramus height and body length, gonial angle were greater than normal, and the chin angle was smaller. 7. Upper incisor was proclined, lower incisor was retroclined.