• 임산에너지
• /
• 제21권2호
• /
• pp.10-16
• /
• 2002

소나무, 낙엽송 및 잣나무 간벌재를 재료로 가압압력과 열압시간을 달리하여 톱밥 보드를 제조하고, 이들이 보드의 물성에 미치는 영향을 조사하였다. 두께 팽창율과 흡수율은 열압시간이 증가함에 따라 감소하였으며, 휨강도와 경도는 열압시간이 증가함에 따라 증가하였다. 톱밥보드의 물성은 가압압력 보다 열압시간에 의해 영향을 받음을 알 수 있었고, 수종간 비교에서는 뚜렷한 경향을 발견 할 수 없었다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.38-44
• /
• 2005

소나무, 낙엽송 및 잣나무 간벌재로 톱밥보드를 만든 후 소성시 승온속도와 최고온도에서 유지시간을 달리하여 우드세라믹을 제조하고 그 물성을 조사하였다. 승온속도가 빠를수록 밀도 및 두께감소율은 감소하였고 길이감소율 및 중량 감소율은 증가하였다. 최고온도에서 유지시간이 증가할수록 길이감소율 및 두께감소율은 증가하였다. 열전도성은 승온속도 $2^{\circ}C/min$와 최고온도에서 유지시간 2시간일 때의 조건으로 제조된 우드세라믹이 가장 우수하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.1-7
• /
• 2004

소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 수지함침율 및 소성온도에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 실리콘러버 히터의 표면온도가 증가함에 따라 우드세라믹의 표면온도도 빠른 속도로 증가하였으며, 히터의 설정표면온도가 70℃ 일때 수지함침율 80% 시편의 표면온도는 53.9 ℃이었으며, 소성온도 1,000℃ 조건으로 제조된 우드세라믹의 표면 온도는 54.2 ℃로 가장 높았다. 히터의 표면온도보다 우드세라믹 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.51-55
• /
• 2000

The woodceramics which are new porous carbon materials were obtained by carbonizing from thinned small log of Aomori HIBA (Thujopsis dolabrata S. et. Z. var. hondae M.) impregnated with phenol resin in a vacuum furnace. During the carbonization process, the resin changes into glassy carbon, which has superior property. The resin impregnation rate and bending strength depend on the types of board and density. In this paper, the manufacturing method of woodceramics made from thinned small logs of Aomori HIBA was introduced and some properties were examined.

• Journal of Forest and Environmental Science
• /
• 제9권1호
• /
• pp.33-43
• /
• 1993

우리나라 전체 산림(山林)의 약 67%가 II 영급(齡級)이하의 유령림(幼齡林)이며 흉고직경(胸高直徑) 16cm이하의 간벌(間伐) 소경재(小徑材)를 생산할 수 있는 III 영급(齡級)까지 합산하면 전체 산림(山林)의 90%이상을 차지한다. 그러므로 본연구에서는 간벌재(間伐材)와 소경재(小徑材)가 밀접한 연계성(連繫性)을 가지고 있음을 감안하여 우리나라 간벌재(間伐材) 생산(生産)의 실태분석(實態分析), 문제점(問題點) 및 개선책(改善策), 그리고 건의사항(建議事項)등을 제시해 보았다.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.31-36
• /
• 2000

Woodceramics are new porous carbon materials obtained by carbonization of wood or woody materials impregnated with thermosetting resin in a vacuum furnace. This study examined the electrical properties of woodceramics made from thinned logs of Cryptomeria japonica as a use for electric articles. The summarized results were as follows: 1. The volume resistivity of woodceramics decreased with increasing density of woodceramics made from 3 type board. And the volume resistivity of woodceramics made from non- steamed board was somewhat higher than steamed board. 2. The consumption of electric power of woodceramics decreased with increasing density of woodceramics and resin contents made from 3 type board. And the consumption of electric power of woodceramics made from non-steamed board was somewhat higher than steamed board. 3. When the woodceramics were coated by silicon, the consumption of electric power increased about 7%.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.73-79
• /
• 2004

간벌재로 제조된 톱밥보드를 페놀수지에 함침율 40-80%로 함침시킨 후 소성온도 600-1500℃에서 소성하여 우드세라믹을 제조한 다음 수지함침율과 소성온도에 따른 우드세라믹의 밀도변화, 중량 및 치수감소율과 열전도성을 조사하였다.수지 함침율과 소성온도가 증가함에 따라 밀도는 커졌으나 소성온도 1200℃ 이후에는 밀도가 낮아졌다. 소성 후 치수 및 중량감소율은 수지함침율이 증가할수록 낮아졌으나 소성온도가 높을수록 커졌다. 열전도성은 수지함침율이 높을수록 우수하였으며, 소성온도와는 뚜렷한 경향을 발견할 수 없었다.

• 농업과학연구
• /
• 제37권3호
• /
• pp.457-464
• /
• 2010

The low melting alloy impregnated wood composites with natural grain of thinned Juglans mandshurica was made and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth(Bi) and tin(Sn) which are harmless to humans, was applied for this novel composites, which showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, low abrasion, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $187^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of 30kgf/$cm^2$. The produced composites showed 9 times higher density for small specimen, 6.6 times for actual size sample and great increase in bending strength from 102.05N/$mm^2$ to 189.47N/$mm^2$ for small size sample and to 205.4N/$mm^2$ for actual size sample, also great increase in hardness from 15.1N/$mm^2$ to 73.38N/$mm^2$ for small size sample and 64.87N/$mm^2$ for actual size sample. And the composites demonstrated great decrease in abrasion depth and in water absorption.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.56-60
• /
• 2000

A new porous carbon material "woodceramics" was developed by carbonizing wood or woody materials impregnated with thermosetting resin. Steamed board and non-steamed board were made from thinned small log of Aomori Hiba (Thujopsis dolabrata S. et. Z. var. hondae M.). They were impregnated with phenol resin and sintered in a vacuum furnace at $650^{\circ}C$. In this paper, the manufacturing method of woodceramics and changes of dimension, weight and compressive strength were investigated. The changes of dimension, weight and compressive strength depend on the types of board and density.