• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.317-327
• /
• 2024

This study investigated the chloride-induced stress corrosion cracking (CISCC) behavior expected to occur in welds of austenitic stainless steel, which are considered candidate materials for dry storage containers for spent nuclear fuel. The behavior was studied by varying temperature, relative humidity (RH), and chloride concentration. 304L-ER308L welded plates were processed into U-bend specimens and exposed to a cyclic corrosion chamber for 12 weeks. The CISCC behavior was then analyzed using electron microscopy. A previous study by the authors confirmed that CISCC occurred in ER308L at 60 ℃, 30% RH, and 0.6 M NaCl via selective corrosion of δ-ferrite. When the temperature was lowered from 60 ℃ to 50 ℃, CISCC still occurred. However, when the humidity was reduced to 20% RH, CISCC did not happen. This can be attributed to the retardation of the deliquescence of NaCl at lower humidity, which was insufficient to promote CISCC. Furthermore, increased chloride concentration to 1.0 M resulted in the absence of CISCC and widespread surface corrosion with severe pitting corrosion because of the increase in thin film thickness.

• Radiation Oncology Journal
• /
• 제17권3호
• /
• pp.256-260
• /
• 1999

목적 : 얇은 박막을 위에 얹은 TLD 선량계의 반응 값에 영향을 미치는 인자를 조사하였고, 특히, 금속박막을 얹은 TLD 선량계의 광자에너지와 표면 흡수선량에 대한 의존성을 조사하였다. 방법 및 재료 : 본 연구에서는 TLD-100과 TLD-100 위에 얹은 Slt은 물질로는 주석, 금, 그리고 TE 플라스틱 판을 사용하였다. 각 금속 박막의 두께는 0.1 mm, TE 플라스틱 판의 두께는 1 mm였고 각 박막의 면적은 TLD-100의 면적과 같이 하였다. 방사선치료에 많이 산이는 6 MV에서 15 MV사이의 광자에너지에 대한 TLD-100의 반응감도와 금박막을 얹은 TLD-100의 반응감도, 그리고 주석 박막을 얹은 TLD-100의 반응감도를 비교해 보았다. 결과 : 금속 박막을 얹은 TLD의 경우 표면 흡수선량의 증가가 명백히 나타나고, 금 박막을 얹은 TLD의 경우 10MV에서 정상 TLD보다 약 1.83배 정도 과잉 반응하는 것으로 관측되었으며, 흡수선량에 따른 반응감도의 변화는 주석을 얹은 TLD의 경우가 가장 작았다 금속 박막을 얹은 TLD의 일반 TLD에 대한 상대 반응감도는 에너지에 대한 의존성을 거의 나타내지 않았다. 그리고 311은 박막의 조직에 대한 등가 두께에 따라 반응감도가 증가하였다. 결론 : 금속박막을 얹은 TLD 선량계의 반응값이 고 에너지(6-15 MV)에 대한 의존성을 거의 나타내지 않았으며, 흡수선량에 대한 선형성도 뛰어난 것으로 관측되었다. 따라서 금속박막을 얹은 TLD 선량계는 매우 작은 크기의 광자빔과 표면흡수선량의 측정에 매우 적합한 것으로 사료된다.

• Macromolecular Research
• /
• 제10권1호
• /
• pp.2-12
• /
• 2002

The small-angle X-ray scattering (SAXS) beamline BL4C1 at the 2.5 GeV storage ring of the Pohang Accelerator Laboratory (PAL) has been in its first you of operation since August 2000. During this first stage it could meet the basic requirements of the rapidly growing domestic SAXS user community, which has been carrying out measurements mainly on various polymer systems. The X-ray source is a bending magnet which produces white radiation with a critical energy of 5.5 keV. A synthetic double multilayer monochromator selects quasi-monochromatic radiation with a bandwidth of ca. 1.5%. This relatively low degree of monochromatization is sufficient for most SAXS measurements and allows a considerably higher flux at the sample as compared to monochromators using single crystals. Higher harmonics from the monochromator are rejected by reflection from a flat mirror, and a slit system is installed for collimation. A charge-coupled device (CCD) system, two one-dimensional photodiode arrays (PDA) and imaging plates (IP) are available its detectors. The overall performance of the beamline optics and of the detector systems has been checked using various standard samples. While the CCD and PDA detectors are well-suited for diffraction measurements, they give unsatisfactory data from weakly scattering samples, due to their high intrinsic noise. By using the IP system smooth scattering curves could be obtained in a wide dynamic range. In the second stage, stating from August 2001, the beamline will be upgraded with additional slits, focusing optics and gas-filled proportional detectors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.34.1-34.14
• /
• 2015

Background: Over the past 30-40 years, various carbon implant materials have become more interesting, because they are well accepted by the biological environment. The traditional carbon-based polymers give rise to many complications. The polymer complication may be eliminated through carbon fibres bound by pyrocarbon (carbon/carbon). The aim of this study is to present the long-term clinical results of carbon/carbon implants, and the results of the scanning electron microscope and energy dispersive spectrometer investigation of an implant retrieved from the human body after 8 years. Methods: Mandibular reconstruction (8-10 years ago) was performed with pure (99.99 %) carbon implants in 16 patients (10 malignant tumours, 4 large cystic lesions and 2 augmentative processes). The long-term effect of the human body on the carbon/carbon implant was investigated by comparing the structure, the surface morphology and the composition of an implant retrieved after 8 years to a sterilized, but not implanted one. Results: Of the 16 patients, the implants had to be removed earlier in 5 patients because of the defect that arose on the oral mucosa above the carbon plates. During the long-term follow-up, plate fracture, loosening of the screws, infection or inflammations around the carbon/carbon implants were not observed. The thickness of the carbon fibres constituting the implants did not change during the 8-year period, the surface of the implant retrieved was covered with a thin surface layer not present on the unimplanted implant. The composition of this layer is identical to the composition of the underlying carbon fibres. Residual soft tissue penetrating the bulk material between the carbon fibre bunches was found on the retrieved implant indicating the importance of the surface morphology in tissue growth and adhering implants. Conclusions: The surface morphology and the structure were not changed after 8 years. The two main components of the implant retrieved from the human body are still carbon and oxygen, but the amount of oxygen is 3-4 times higher than on the surface of the reference implant, which can be attributed to the oxidative effect of the human body, consequently in the integration and biocompatibility of the implant. The clinical conclusion is that if the soft part cover is appropriate, the carbon implants are cosmetically and functionally more suitable than titanium plates.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• 공업화학
• /
• 제20권4호
• /
• pp.402-406
• /
• 2009

상압플라즈마 공정을 이용하여 $TiO_2$ 박막의 표면을 개질하고 광촉매 활성을 평가하였다. $TiO_2$ 박막은 $TiO_2$ 졸-겔 용액에서 유리판에 dip-coating법으로 코팅한 후 소성 온도와 소성 시간을 변화시켜 가면서 제조하였다. 표면 개질에 사용된 플라즈마는 질소 플라즈마였으며, 방전전력, 처리시간 등의 공정변수를 변화시키면서 실험을 수행하였다. 광촉매 활성은 UV-A와 형광등 하에서의 메틸렌 블루 분해효율을 바탕으로 평가하였다. XPS 분석 결과, 박막의 표면에 소량의 질소가 도핑되었음을 알 수 있었으며, 광촉매 효율은 UV-A와 형광등 하에서 모두 증가하였고, 특히 형광등 하에서 좀 더 증가하였다.

• Journal of Nutrition and Health
• /
• 제10권2호
• /
• pp.44-53
• /
• 1977

The Korean origin edible oil sterol part of the rape, sesame and perilla oil can be separated from the other constituents of the non-saponifiable fraction, by the thin layer chromatography on the preparative Plates. The composition of sterols have been determined by gas liquid chromatography and thin layer chromatographic anlysis. Two sterols, ${\beta}$-sitosterol and campesterol were present in all of the oils. And brassicasterol were found in rapeseed oil in addition to the two sterols that were common to all of the oils studied. It was noted that ${\beta}$-sitosterol was the major sterol in the Korean original edible oils. The results showed that contents of sterols were campesterol 24.31%, ${\beta}$-sitosterol 58.90% ana Brassicasterol 11.54%, and $\Delta^7$-sterol 5.25% by method of triangulation and campesterol 26.16%, ${\beta}$-sitosterol 57.50%, brassicasterol 11.70% and ${\Delta}^7$-sterol 4.64% by method of Planimetry of rape seed oil. By sesame seed oil sterol compositions were campesterol 20.35%, stigmasterol 9.15%, ${\beta}$-sitosterol 43.49%, ${\Delta}^7$-sterol 11.25% and others 15.76% by method of triangulation and campesterol 16.79%, stigmasterol 8.69%, ${\beta}$-sitosterol 44.58%, ${\Delta}^7$-sterol 14.28% and others 15.56% by method of planimetry. Campesterol 12.45%, stigmasteriol 5.40%, ${\beta}$-sitosterol 72.32% and ${\Delta}^7$-Sterol 9.83% by method of triangulation-and campesterol 13.00%, stigmasterol 3.76%, ${\beta}$-sitosterol 74.57% and ${\Delta}^7$ sterols 8.67% by method of planimetry of perilla oil. Contents of totalsterol in Korean edible oils were 0.82% by rape, 0.58% by sesame and 0.45% by perilla, respectively.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1974년도 학술대회지
• /
• pp.101-113
• /
• 1974

The radioactive compound sodium $acetate-U-C^{14}$ (C-14 acetate) was administered to two- and four-year-old July and September American ginseng (Panax quinquefolium L.) plants and cuttings. The C-14 acetate uptake was approximately $99\%.$ The autoradiochromatograms suggest that the saponins(panaquilins) isolated by preparative thin-layer chromatography contained impurities, especially those isolated from the leaf and stem extracts. The root and fruit methanol extracts yielded relatively pure saponins. The large amounts of panaquilin B and its proximity to panaquilin C on preparative thin-layer plates resulted in some admixing. The average concentration $(\%$ plant dry weight) of semipurified saponins were high in the leaves $(13.8\%),$ compared to fruits $(9.8\%),\;stems\;(7.9\%)\;and\;roots\;(6.3\%).$ The average percentage of C-14 acetate incorporation into panaquilins was $4.8\%.$ The average percentage of C-14 acetate incorporation into panaquilins B and C was higher $(1.40\%\;and\;1.13\%,$ respectively) than that into panaquilin C, (d), G-1 and G-2 $(0.75\%,\;0.65\%,\;0.13\%\;and\;0.53\%,$ respectively). Panaquilin synthesis may be depending upon the part collection period and age of the plant. The average percentage of C-14 acetate incorporation into panaquilin B is high in roots $(0.58\%)\;and\;stems\;(0.48\%);$ that into panaquilins C and (d) high in leaves $(0.40\%\;and\;0.45\%,$ respectively); and that into panaquilin E high in roots and leaves $(0.55\%\and\;0.50\%,$ respectively). Panaquilin G-2 was synthesized in all parts of plants. The panaquilins appear to be biosynthesized more actively in July than September (exception-panaquilin G-l). Panaquilins B, C and G-1 may be biosynthesized more actively in four-year-old plants and panaquilins (d) and E more actively in two-year-old plants. The results from expectance with cuttings suggest that the panaquilins are synthesized de novo in the above-ground parts of ginseng plants, and that panaquilin G-l may be synthesized de novo in the leaf. It is known from the tissue culture studies that panaquilins are produced by leaf, stem and root callus tissues and callus-root cultures of American and Korean ginseng plants. Panaquilins may actively be synthesized de novo in most any cell or organ of the ginseng plants. It was verified that C-14 acetate was incorporated into the panaxadiol portions of the panaquilins of two-year-old plants (sp. act., 0.56 $m{\mu}Ci/mg$) and four-year-old plants (sp. act., 0.54 $m{\mu}Ci/mg$).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 폴리머
• /
• 제33권1호
• /
• pp.79-83
• /
• 2009

Hexamethyldisiloxane(HMDSO)+$O_2$를 플라즈마 중합시켜 알루미늄 판과 알루미늄 콘덴서 케이스 표면에 전기 절연박막을 코팅하였다. 코팅된 박막들은 두께가 0.5 ${\mu}m$ 이상이면 박막의 종류에 상관없이 1.0 M$\Omega$ 이상의 저항 값을 보였으며, 박막의 표면 형태 및 접착력은 플라즈마의 공정조건에 따라 달라졌다. 박막의 증착속도 및 접착력은 $O_2$/HMDSO 유량비와 방전전력에 따라 달라졌으며, 유량비가 4이고 방전전력이 60 W일 때 가장 좋은 결과를 보였다. 집착력은 또한 알루미늄을 끓는 물에서 30분간 전처리한 경우에 박막과 알루미늅 표면 사이에 Al-O-Si 결합을 형성하면서 크게 향상되었다. 이렇게 코팅된 박막은 우수한 내약품성과 내열성을 지니고 있었다.