• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.820-830
• /
• 2016

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3272-3282
• /
• 2022

To improve the safety and life extension qualities of nuclear fuel rods which is currently made of zirconium (Zr) alloy, research on the application of chromium (Cr) coating was conducted. Cr coating has advantages such as increased corrosion resistance and reduced oxidation rate, but non-destructive thickness evaluation studies are needed to ensure the reliability of the steps taken to provide uniform coating thickness. Eddy current testing (ECT) is a representative non-destructive technique for such as thickness evaluation and surface defect inspection. To inspect changes in thickness at micron scale, the Swept Frequency Eddy Current Testing (SFECT) method was applied to select a frequency range sensitive to changes in thickness. The coating thickness was evaluated using changes in signals, such as that for impedance. In this study, basic research was performed to evaluate the thickness of the Cr coating on a rod using an encircling sensor and the SFECT technique. The sensor design parameters were determined through simulation, after which the new sensor was manufactured. A sensor capable of measuring the thickness of a non-uniformly Cr-coating rod was selected through an experiment evaluating the performance of the manufactured sensor. This was done using the impedance-difference of a Cr-coating rod and a Zr alloy rod. The possibility of evaluation of the Cr coating thickness was confirmed by comparing the experimental results with the selected sensor and the signals of the measured Cr-coating rod. All simulation results were verified experimentally.

• 복식문화연구
• /
• 제6권2호
• /
• pp.66-76
• /
• 1998

In order to investigate the effect of shoulder pad affecting the arm movement, eleven women volunteers of standard body whose age is from eighteen to twenty-four(x±1σ) were chosen and this experiment had done according to front-vertical motion, side-vertical motion and horizontal motion of upper limps for tow different materials of shoulder pad(sponge, non-woven) and four different thickness of shoulder pad(0.6cm, 0.8cm, 1.2cm). On the base of this, this study, when putting on shoulder pad, try to find the reform method of shoulder part pattern. The results are as follows. 1. When puting on shoulder pad to blouse pattern to rise shoulder pad for rate of two-third per thickness is seemingly the best for sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation of clothes, when that, rising shoulder pad for ate of two-third per thickness is the best. 2. From the results of measure of functional volume and physiological value for functionality evaluation according to thickness and material, motion of shoulder pad, 1.2 cm thickness and non-woven material is evaluated the worst for functionality. 3. From the results of sensory evaluation and functionality evaluation of material of shoulder pad, sponge material is superior for functionality but not for sensory evaluation, non-woven material is superior for sensory evaluation non-woven material is superior for sensory evaluation but not for functionality. So, think that it had better use sponge material for functional clothes, non-woven material for aesthetical clothes. 4. From the results of functionality of clothes, when putting on shoulder pad, the worst discomfortable parts are the armpit part and the shawl part, functionality of these part shoulder be reformed.

• 소성∙가공
• /
• 제15권9호
• /
• pp.660-666
• /
• 2006

This study examined the mechanical properties and bending formability evaluation of spring strip materials(SK5 CSPH, STS 301 CSP-EH, C7701-H). The hardness test and tensile test were performed at room temperature($20^{\circ}C$) for mechanical properties. The U-bending test were carried out at various conditions of punch corner radius(Rp), ratio of punch comer radius/thickness(Rp/t) and ratio of clearance/thickness(Rp/t) and ratio of clearance/thickness(C/t) for bending formability evaluation.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.81-88
• /
• 2001

This study proposed an analytical method to evaluate a local allowable wall thickness (LAWT) for locally thinned pipe subjected to internal pressure and bending moment. In this method, the stresses in the thinned region were calculated by finite element analysis and plastic collapse was applied as a failure criterion of thinned pipe. Using this method, LAWT for a simplified thinned pipe was evaluated with variation in axial extent of thinned area, and it was compared with allowable wall thickness provided by previous pipe wall thickness criteria. The results showed that the LAWT was lower, about 50%, than that calculated by construction code or ASME Code N-597, and it was higher, about 2 times, than that estimated by evaluation model based on pipe experiments. In addition, LAWT was decreased with increasing axial extent of thinned area and saturated with further increase in axial extent. And, the variation in LAWT with axial extent of thinned area depended on type of load, especially a magnitude of bending moment, considering in the evaluation.

• Journal of Animal Science and Technology
• /
• 제64권1호
• /
• pp.143-154
• /
• 2022

This study was conducted to evaluate the relationship among market weight, slaughter age, yield grade, and primal cut yield in Hanwoo. A total of 403 Hanwoo (Korean native cattle) was assessed for carcass traits such as carcass cold weight, backfat thickness, ribeye area, dressing percentage, yield index, and marbling score. The production yield of the individual major primal cuts of Hanwoo beef was also measured. Carcass cold weight, ribeye area, and backfat thickness, which affect meat quality increased with increased market weight (p < 0.05). The production yield of the ten major primal cuts also increased with increased market weight (p < 0.05). In terms of slaughter age, carcass cold weight, ribeye area, and backfat thickness all increased from 25 months to 28-29 months, and the production yield of all prime cuts also increased with increasing slaughter age. According to the meat yield grade, carcass cold weight and backfat thickness increased from grade A to grade C, although the ribeye area was not affected. The combined findings of the study suggest that slaughtering Hanwoo at the weight of 651-700 kg and 701-750 and age of 28.23 and 29.83 months could be desirable to achieve the best quality and quantity grade of Hanwoo beef. However, the positive correlation of carcass cold weight and backfat thickness, and the negative correlation of the yield index according to primal cuts yield indicated that it is necessary to couple the slaughtering management of cattle with improved genetic and breeding method of Hanwoo to increase the production yield of the major prime cuts of Hanwoo beef.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.664-667
• /
• 2004

It may have to establish the definite standard for performance evaluation basis about cementitious waterproofing material in job site that applied the method of construction formed cement waterproof course on concrete surface In present paper shows the effective selection method of waterproof layer of optimum thickness for economic performance as evaluating of the need thickness on waterproof property of penetrating waterproofing material.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.665-672
• /
• 2001

Fibrillation is caused by wet abrasion and occurs during scouring treatments, domestic laundering and wet finishing. So, for clean fabrics, fibrillation must either be prevented or removed after it has occurred. In this study, we researched the influence thickness of tencel on fibrillation occurrence. And the three methods of SEM photograph, reflectance values and gray level values were used in order to present proper evaluation method for fibrillation. The results are as follows. The thickness of tencel was high affected with occurrence of fibrillation, that is, as the thickness of fabrics thicker, the fibrillation occurer. And all method applicated as fibrillation evaluation method very effected without big difference, but they come into be a little question in the side of exactness.

• 한국식품저장유통학회지
• /
• 제1권1호
• /
• pp.9-14
• /
• 1994

Soluble solids($^{\circ}$Brix), acid content and edible part ratio of Citrus unshiu collected at sorting Places in south Cheju area wee more lowered, and peel thickness was more thickened with increasing fruit size. Compared to early variety of Citurs unshiu(C. unshiu Miyakawa Mar), peel thickness of medium variety of Citurs unshiu(C. unshiu Hayashi Mar) was more thickened, and edible part ratio was more lowered with increasing fruit size. Soluble solids of medium variety of Citurs unshiu were lowered, and acid contents were increased compared to early variety. Processing properties for pressing concentrated juice was good for early variety of Citurs unshiu, especially on fruit diameter of 50-65mm. Soluble solids, acid contents and juice ratio were decreased with increasing peel thickness. The quality properties for fresh fruit with peel thickness had a good correlation on early variety of Citurs unshiu, and these data are supposed to be applied to the quality evaluation of Citurs unshiu produced in Cheju.

• 비파괴검사학회지
• /
• 제27권5호
• /
• pp.398-408
• /
• 2007

본 논문에서는 반사형 펄스와전류 탐상법을 사용하여 두께를 효과적으로 평가하기 위해 여러가지 탐촉자 모델들을 설계하고, 수치해석 방법을 사용하여 피검사체의 두께 변화에 따른 펄스와전류 신호의 특징 변화, 민감도 등을 조사하였다. 반사형 탐상에서는 센서코일이 여자코일 자계보다는 피검사체에 형성된 와전류로 인한 자계를 감지해야 하므로, 구리-페라이트로 차폐한 모델들과 페라이트만으로 차폐한 모델들에서의 펄스와전류 신호를 조사하였다. 이러한 신호들에서 두께 판별에 유용한 특성을 조사하여 신호의 피크값과 zero crossing time을 선정할 수 있었고, 이들의 두께변화에 대한 민감도를 조사하였다. 그 결과, 두 종류의 차폐 모델들에서 모두 피크값 민감도가 zero crossing time 민감도보다 효과적이라는 것을 알 수 있었고, 구리-페라이트로 차폐한 모델 보다 페라이트만으로 차폐한 모델에서의 피크값 민감도가 훨씬 더 높다는 것을 알 수 있었다.