• 한국추진공학회지
• /
• 제9권3호
• /
• pp.25-37
• /
• 2005

터보펌프 공급방식 발사체 추진기관은 공급 시작 시점에서부터 종료되는 시점까지 산화제 터보펌프 입구에서의 온도 요구조건을 충족시켜야 한다. 이러한 조건이 만족되지 못할 경우 터보펌프 입구에서 캐비테이션이 발생하여 펌핑(pumping) 성능이 저하되고, 심한 경우 펌프의 손상을 초래할 수 있다. 따라서 극저온 액체산소를 사용하는 액체로켓 추진기관에서는 액체산소의 온도 상승에 대한 적확한 예측이 필수적이다 본 논문에서는 탱크 내의 액체산소 온도상승과 관계된 탱크 내 해석 방법을 체계적으로 제시하였고, 부력동기 경계층 이론을 적용하여 터보펌프 공급방식 로켓 추진기관의 충전, 대기, 선가압, 비행 등의 전 과정을 통하여 탱크에 충전된 액체산소의 온도상승을 예측할 수 있는 모델을 제시 하였다.

• 한국화재소방학회논문지
• /
• 제11권1호
• /
• pp.3-9
• /
• 1997

화재시 설내의 열적성충의 형성을 연구하기 위하여 쓰레기통, 의자, 카페트, 소파, 매트리스 및 장 농의 화재실험을 실제건물에서 수행하였다. 카페트와 같은 균퉁분산 가연물화재의 경우는 초기 점화기 간과 성장기의 기간이 화재 전기간에 비하여 매우 짧고, 최성기는 매우 길게 나타났다. 반면에 쓰레기 통, 매트리스 및 장농과 같은 집중 가연물화재의 경우는 초기점화기간과 성장기가 매우 길게 나타났다. 쓰레기통과 같은 위에서 아래인 한쪽 방향으로만 연소하는 경우는 봉우리가 하나로 나타났고, 의자, 소 파, 매트리스 및 장농과 같은 연소방향이 다양한 화재의 경우는 봉우리가 2개이상 나타났다. 어느 화재 의 경우나 경계면이 뚜렷이 나타났고, 상부충의 온도는 거의 일정하며 경계면 높이는 가구화재시 모두 1 l[m] 근처에서 일정한 상태값을 유지하였다. 다만, 최대온도를 나타내는 시간에는 경계면 높이가 바 닥에서 O.2S[m]내지 O.7S[m]까지도 내려왔다.

• 한국물환경학회지
• /
• 제31권6호
• /
• pp.723-731
• /
• 2015

We investigated the spatial and temporal patterns of water quality in the Gangjung-Goryoung weir that is located in the middle area of the Nakdong river, Korea. The monitoring results indicated that there are discernible vertical differences in water quality during the pre- and post-monsoon periods (May to September). During this period, it was observed that the weak thermal stratification formed at the maximum level, and pH, Chl-a, and DO concentrations in the surface layer were higher than those in the bottom layer. This vertical difference was especially noticeable for DO concentrations: there were DO depletions at the bottom layer in late June to early August. During the summer monsoon period with heavy rainfall, there was a decline in vertical differences in water quality. From this study, it was suggested that continuous monitoring of vertical profiles could become a useful tool for identifying the spatial and temporal distributions of water quality and for developing the best management policy for water quality in the Nakdong river.

• Wind and Structures
• /
• 제24권6호
• /
• pp.579-611
• /
• 2017

Bora is a strong, usually dry temporally and spatially transient wind that is common at the eastern Adriatic Coast and many other dynamically similar regions around the world. One of the Bora main characteristics is its gustiness, when wind velocities can reach up to five times the mean velocity. Bora often creates significant problems to traffic, structures and human life in general. In this study, Bora velocity and near-ground turbulence are studied using the results of three-level high-frequency Bora field measurements carried out on a meteorological tower near the city of Split, Croatia. These measurements are analyzed for a period from April 2010 until June 2011. This rather long period allows for making quite robust and reliable conclusions. The focus is on mean Bora velocity, turbulence intensity, Reynolds shear stress and turbulence length scale profiles, as well as on Bora velocity power spectra and thermal stratification. The results are compared with commonly used empirical laws and recommendations provided in the ESDU 85020 wind engineering standard to question its applicability to Bora. The obtained results report some interesting findings. In particular, the empirical power- and logarithmic laws proved to fit mean Bora velocity profiles well. With decreasing Bora velocity there is an increase in the power-law exponent and aerodynamic surface roughness length, and simultaneously a decrease in friction velocity. This indicates an urban-like velocity profile for smaller wind velocities and a rural-like velocity profile for larger wind velocities. Bora proved to be near-neutral thermally stratified. Turbulence intensity and lateral component of turbulence length scales agree well with ESDU 85020 for this particular terrain type. Longitudinal and vertical turbulence length scales, Reynolds shear stress and velocity power spectra differ considerably from ESDU 85020. This may have significant implications on calculations of Bora wind loads on structures.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.155-161
• /
• 2023

Recently, a study on alternative and renewable energy is being conducted due to energy depletion and environmental problems. In particular, a hydrogen has the advantage of converting and storing the remaining energy into water-electrolyzed hydrogen through renewable energy generation. In general, due to reasons such as insulation problems, a study on high-pressure hydrogen storage tanks and related parts has recently been conducted. However, in the case of liquid hydrogen, the volume can be reduced by about 800 times or more compared to high-pressure hydrogen gas, so the study on this is needed as a technology that can increase energy density. In this study, the evaporation characteristics were analyzed under fixed heat flux conditions for liquid hydrogen storage tanks and the change in thermal stratification according to sloshing was analyzed. The heat flux condition was fixed at 250 W/m² and the horizontal resonance frequency of the primary mode was applied to the storage tank. As a result, it was confirmed that the thermal stratification phenomenon decreased compared to the case where the slashing was not present due to forced convection when the slashing was present.

• 천문학회보
• /
• 제35권1호
• /
• pp.66.1-66.1
• /
• 2010

Using two-dimensional numerical hydrodynamic simulations, we investigate the star formation rate (SFR) in turbulent, multiphase, galactic gaseous disks. Our simulation domain is axisymmetric, and local in the radial direction and global in the vertical direction. Our models include galactic rotation, vertical density stratification, self-gravity, radiative heating and cooling, and thermal conduction, but do not include spiral-arm features. Turbulence in our models is driven by momentum feedback from supernova explosion events occurring in localized dense regions formed by thermal and gravitational instabilities. Self-consistent radiative heating, representing enhanced/reduced FUV photons from the star formation, is also taken into account. By controlling three parameters (the gas surface density, the stellar disk density, and the angular rotation rate) that characterize local galactic disks, we explore how the SFR depends on the background environmental state. We also discuss the relation between the SFR and the gas surface density found in our numerical models in comparison with observations.

• 한국해안해양공학회지
• /
• 제7권2호
• /
• pp.148-155
• /
• 1995

가로흐름이 존재하는 무한수역으로 방출되는 표면 온배수에 의한 온도장 예측을 위하여 k-$\varepsilon$ 난류모델을 이용한 근해역 3차원 온배수 수치모델을 개발하였다. 개발된 모델에 의한 수치실험 결과는 다소 제한적이긴 하나, 실험결과 자료와 비교적 잘 일치하였다. 3차원 온배수 난류모델의 적용을 통해 가로흐름과 상호작용은 물론 수심적분 2차원 수치모델에서 해석이 곤란한 온배수 확장에 따른 성층화 현상, 부력에 기인된 횡방향의 중력확장 및 제트 저면에서의 포획연행 현상을 잘 나타내었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.565-570
• /
• 1998

An interfacial condensation heat transfer phenomenon in a steam/water countercurrent stratified flow in a nearly horizontal pipe has been experimentally investigated. The present study has been focused on the measurement of the temperature and velocity distributions within the water layer. In particular, the water layer thickness used in the present work is large enough so that the turbulent mixing is limited and the thermal stratification is established. As a result, the thermal resistance of the water layer to the condensation heat transfer is increased significantly. An empirical correlation of the interfacial condensation heat transfer has been developed. The present correlation agrees with the data within $\pm$15%

• 태양에너지
• /
• 제18권4호
• /
• pp.59-66
• /
• 1998

It was compared with experimental data to verify TRNSYS Model of the thermosyphon hot water system and the various simulations were conducted to optimize the component parameters of the system. To obtain consistent simulation results the system model, which could accurately describ the thermal storage tank temperature stratification and the friction head for mass flow rate, was used. The optimization of collector parameters(collector aspect ratio, riser numbers per header unit length), thermal storage tank parameters(ratio of tank length to tank diameter, heat exchanger type), system parameters(ratio of tank volume to collector area) was simulated by TRNSYS program. The simulation results indicate that the system performance is more effected by collector aspect ratio and the ratio of tank volume to collector area than the othor parameters.

• 비파괴검사학회지
• /
• 제12권2호
• /
• pp.14-20
• /
• 1992

Stress analysis has been performed using computer program ANSYS in the pressurizer surge line in accordance with ASME Sec. III in order to predict possibility of fatigue failure due to thermal stratification phenomena in pipes connected to reactor coolant system of nuclear power plants. Highly vulnerable area to crack generation has been chosen by the analysis of fatigue due to thermal stress in pressurizer surge line. This kind of result can be helpful to choose the location requiring intensive care during inservice inspection of nuclear power plants.