• 폴리머
• /
• 제28권5호
• /
• pp.391-396
• /
• 2004

기존의 에폭시/실리카 나노복합재료의 제조 방법에서 나타나는 문제점인 경화 반응 중의 휘발성 부산물 생성에 의한 미세기공 형성 및 치수 불안전성 등을 극복하고자 Si-N 전구체를 사용한 새로운 방법을 제안하고자 한다. 실리카 전구체로 부산물이 형성되지 않는 메틸트리페닐실란 (MTPS)을 합성하고 이를 이용하여 솔-젤 반응과 에폭시 경화 반응이 병행되는 동시 복합화 반응을 통하여 무기상의 고른 분산상태를 지닌 에폭시/실리카 나노복합재료를 제조하였으며, 이로부터 뛰어난 투명성뿐 아니라 기계적 물성과 열적특성에서 탁월한 물성의 증가를 얻을 수 있었다.

• 방사선산업학회지
• /
• 제5권1호
• /
• pp.41-46
• /
• 2011

Polyacrylonitrile (PAN) fibers are the most widely used precursor of the materials for carbon fibers. The conventional process of carbon fibers from PAN precursor fiber includes two step; stabilization at low temperature and carbonization at high temperature. Compared to thermal stabilization, the stabilization process by electron beam (E-beam) irradiation is a advanced and brief method. However, a stabilization by E-beam irradiation was required a high dose (over 5,000 kGy) and spend over 1.5 hr (1.14 MeV, 1 mA). In the present work the main goal is exploring a quick stabilization process by cotrolling E-beam currents. The effect of various E-beam currents on stabilization of PAN precursor fiber was studied by gel fraction test, thermo gravimertic analysis (TGA), differential scanning calorimetry (DSC), tensile strength, and scanning electron microscopy (SEM) images.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.286-290
• /
• 2010

Coumarin기가 포함된 액정성을 가진 단량체를 액정 상태에서 UV 조사에 의해 중합하였다. Cycloaddition 반응에 의해 coumarin 액정 단량체는 이량체로 전환되었으며, 광이량화 반응 후에도 액정성이 유지되었다. 그리고 이러한 이량체는 단량체의 액정범위 보다 넓은 영역에서 액정성을 나타내었다. 화합물의 구조는 FT IR 및 $^1H$ NMR에 의해 확인하였으며, 그들의 열적 상전이온도 및 열안정성들은 DSC, GPC 및 편광현미경에 의해 조사하였다. 광중합에 의해 생성된 고분자 생성물은 광학 편광 현미경 관찰에 의해 스멕틱 및 네마틱 조직을 갖는 쌍방성 액정성을 보였다.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.912-918
• /
• 2009

An optically active diacid containing the L-histidine moiety was prepared by reacting pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydride) 1 with L-histidine 2 in acetic acid, and was polymerized with several aromatic diamines 5a-g to obtain a new series of optically active poly(amide-imide)s (PAIs) using two different methods, such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$)/pyridine (Py) and direct polycondensation in a tosyl chloride (TsCl)/pyridine (Py)/N,N-dimethylformamide (DMF) system as a condensation agent. The resulting new polymers 6a-g with inherent viscosity was obtained in good yield. The polymers were readily soluble in polar organic solvents, such as N,N-dimethyacetamide (DMAc), N,N-dimethyformamide (DMF), and dimethyl sulfoxide (DMSO). The obtained polymers were characterized by FTIR, specific rotation, elemental analysis as well as $^1$H-NMR spectroscopy and gel permeation chromatography (GPC). The thermal stability of the resulting PAIs was evaluated with thermogravimetric analysis techniques under a nitrogen atmosphere.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.247-252
• /
• 2008

Lithium gel electrolytes based on a mixed polymer matrix consisting of poly(vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) and cyanoresin type M (CRM) were prepared using an in situ blending process. The CRM used in this study was a copolymer of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) (PVA) with a mole ratio of 1:1. The mixed plasticizer was ethylene carbonate (EC) and propylene carbonate (PC) with a volume ratio of 1:1. In this study, the presence of PVDF in the electrolytes helps to form a dimensionally stable film over a broad composition range, and decreases the viscosity. In addition, it provides better rheological properties that are suitable for the extrusion of thin films. However, the presence of HFP has a positive effect on generating an amorphous domain in a crystalline PVDF structure. The ionic conductivity of the polymer electrolytes was investigated in the range 298-333 K. The introduction of CRM into the PVDF-HFP/$LiPF_6$, complex produced a PVDF-HFP/CRM/$LiPF_6$ complex with a higher ionic conductivity and improved thermal stability and dynamic mechanical properties than a simple PVDF-HFP/$LiPF_6$, complex.

• 대한화학회지
• /
• 제65권2호
• /
• pp.125-132
• /
• 2021

An electrochromic nickel oxide thin film was fabricated on a flexible PET/ITO substrate using a nanocrystallite- dispersed coating sol and bar coater. Nanocrystalline NiOx of 3-4 nm crystallite size was first synthesized by base precipitation and thermal conversion. This NiOx nanocrystallite powder was mechanically dispersed in an alcoholic solvent mixed with a silane binder to prepare a coating sol for thin film. This sol method is different from the normal sol-gel method in that it does not require the conversion of precursor by heat treatment. Therefore, this method provides a very facile method to prepare NiOx thin films on any kind of substrate and it can be easily applied to mass production. The electrochromic performance of this NiOx thin film on PET/ITO electrode with a thickness of about 400 nm was investigated in a nonaqueous LiClO4 electrolyte solution by cyclic voltammetric and repeated chronoamperometric measurements in conjunction with spectrophotometry. The visible light modulation of 44% and the colorization efficiency of 41 ㎠/C at 550 nm were obtained at the step potentials of -0.8/+1.2 V vs Ag and a duration of 30 s.

• Nano
• /
• 제13권10호
• /
• pp.1850119.1-1850119.6
• /
• 2018

$Eu^{3+}/Tb^{3+}$ co-doped nanocomposite containing $CeO_2$ nanocrystals was successfully prepared by an in situ sol-gel polymerization approach. High-resolution transmission electron microscopy demonstrated the homogeneous precipitation of $CeO_2$ nanocrystals among the polymethylmethacrylate (PMMA) matrix. The thermal stability and UV-shielding capability of the obtained nanocomposite were improved with increase of $CeO_2$ content. The tuning of the emissive color from green and yellow to red can be easily achieved by varying the dopant species and concentration. These results suggested that the obtained nanocomposite could be potentially applicable in transparent solid-state luminescent devices.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.1-12
• /
• 2022

Bentonite is the most probable candidate to be used as a buffer in a deep geological repository with high swelling properties, hydraulic conductivity, thermal conductivity, and radionuclide sorption ability. Among them, the radionuclide sorption ability prevents or delays the transport of radionuclides into the nearby environment when an accident occurs and the radionuclide leaks from the canister, so it needs to be strengthened in terms of long-term disposal safety. Here, we proposed a surface modification method in which some inorganic additives were added to form NaP zeolite on the surface of the bentonite yielded at Yeonil, South Korea. We confirmed that the NaP zeolite was well-formed on the bentonite surface, which also increased the sorption efficiency of Cs and Sr from groundwater conditions. Both NaP and NaX zeolite can be produced and we have demonstrated that the generation mechanism of NaX and NaP is due to the number of homogeneous/heterogeneous nucleation sites and the number of nutrients supplied from an aluminosilicate gel during the surface modification process. This study showed the potential of surface modification on bentonite to enhance the safety of deep geological radioactive waste repository by improving the radionuclide sorption ability of bentonite.

• Computers and Concrete
• /
• 제29권4호
• /
• pp.237-246
• /
• 2022

The concrete quality relies on general factors like preparation technique, uniformity of the compaction, amount and appropriateness of the additives. The current article investigates the impact of a well knows amino acid, L-arginine as an additive on water requirements, setting durations and characterization of various cement samples. Compressive strength tests of reference and L-arginine added cements at age of 2, 7 and 28 days were carried out according to TS-EN 196-1. Samples were blended by incorporating various amounts of L-arginine (25 ppm, 50 ppm and 75 ppm) in the cement water mixture which were tested with Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TG), scanning electron microscopy (SEM) and the energy-dispersive X-ray spectroscopy (EDS) on the 28th day. Results revealed that L-arginine does not affect the setting time, volume expansion of cement and water demands negatively; rather it imparts enhanced sustainability to the samples. It was determined that the highest value belonged to the 75L mortar with an increase of 2.6% compared to the reference sample when the compressive strengths of all mortars were compared on the 28th day. Besides, it has been observed that the development of calcium silicate hydrate or C-S-H gel, calcium hydroxide or CH and other hydrated products are associated with each other. L-arginine definitely has a contribution in the consumption of CH formed in the hydration process.

• 공업화학
• /
• 제24권3호
• /
• pp.305-313
• /
• 2013

본 연구는 glycidyl azide polymer (GAP)계 에너지 함유 열가소성 폴리우레탄 탄성체(energetic thermoplastic polyurethane elastomers, ETPE)를 합성한 후 탄성체의 필름 제조 공정의 열처리 조건이 물성에 미치는 영향에 대하여 고찰하였다. GAP계 ETPE는 ATR-FTIR, DSC, 그리고 DMA를 이용하여 분석하였다. GAP계 ETPE의 물성에 대한 열처리 조건의 영향은 $80{\sim}130^{\circ}C$의 온도 범위에서 1 h과 24 h의 열처리 시간을 나누어 연구를 진행하였다. 1 h의 열처리 조건에서는 $130^{\circ}C$의 열처리 온도에서 그리고 24 h의 열처리 과정에서는 $105^{\circ}C$ 이상의 온도조건에서 아자이드기의 흡수대인 $2090cm^{-1}$ 피크의 감소가 관찰되었으며, methylene chloride와 dimethylformamide 용매에 대한 필름의 용해도 또한 감소하였다. 이것은 $100^{\circ}C$ 이상 열처리 온도조건이 아자이드기의 가교 부반응을 유도할 수 있음을 나타낸다. 또한 열처리 온도가 $80^{\circ}C$에서 $110^{\circ}C$로 증가함에 따라 온도변화에 따른 저장 탄성률 곡선의 고온 고무평탄 영역이 더 높은 온도까지 확장되었으며, 이 또한 가교반응의 결과이다.