• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.441-446
• /
• 2013

A thermal model of power modules based on the physical dimension and thermal properties is proposed in this paper. The heat path in the power module is considered as a one-dimensional heat transfer in the model. The method of the parameters extraction for the model is given in the paper. With high speed and accuracy, the thermal model is suit for electrothermal simulation. The proposed model is verified by experimental results.

• Preventive Nutrition and Food Science
• /
• 제12권3호
• /
• pp.131-134
• /
• 2007

The kinetic analyses for thermal products of alpha-, gamma- and delta-tocopherols during heating as functions of temperature and time were studied. Alpha-, gamma- and delta-tocopherols dissolved in glycerol were heated at $100{\sim}200^{\circ}C$ for $5{\sim}60$ min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase ${\mu}-Bondapak$ $C_{18}-column$ with two kinds of elution solvents in a gradient mode. The formation kinetics of thermal products of tocopherols followed a first-order kinetic model. The formation rate of thermal products of tocopherols was dependent on heating temperatures and heating times. The activation energy and enthalpy for the thermal products of ${\gamma}-and$ ${\delta}-tocopherols$ were higher than those for ${\alpha}-tocopherol$ as in the case of the oxidative degradation kinetics of tocopherol. The magnitude order of the activation energy was ${\gamma}->{\delta}->{\alpha}-tocopherol$.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1503-1508
• /
• 2009

본 논문은 열적외선 카메라 이미지를 영상 처리 기법을 활용하여 실시간으로 구현하는데 그 목적이 있다. 열적외선 영상 데이터는 온도의 변화에 따라 Hot Mapping, Cool Mapping, Rainbow Mapping을 하였으며, 열적외선 이미지의 명암대비 기능을 알아보기 위해 히스토그램 영상처리 기법을 사용하였고, 물체의 구분을 위해서 열적외선 이미지의 에지 부분을 추출하였다. 또한 이미지에서 온도를 추출해 내기 위해 이미지 정보 프로그램을 만들어 온도를 측정할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.628-634
• /
• 2000

Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2875-2878
• /
• 2011

The wooden sleeper has been used at the railway track. Recently the concrete sleeper is pushing the wooden sleeper out, but huge amount of waste wooden sleepers are discharged every year. Due to the contaminant of waste wooden sleeper, its disposal is very difficult. Commonly a wood preservative such as creosote is used in the manufacturing process and it becomes major contaminant after use. And the wooden sleeper is contaminated by diesel from locomotives and lubricant oil from the maintenance of railway turnout. Currently the limitary disposal methods can be used because of high toxicity of waste wooden sleeper. Therefore the preliminary study on thermal-extraction of contaminants such as creosote, diesel and lubricant oil from waste wooden sleeper was conducted and the effects of factors were investigated.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2034-2040
• /
• 2020

The gas evolution from mixtures consisting of 0.2 M solution of N,N,N',N'-tetra-n-octyldiglycolamide (TODGA) in n-alcohol (n-decanol or n-nonanol) with Isopar-M diluent was investigated during thermal oxidation. The effect of ionizing radiation on their thermal stability has been studied. It has been determined that the volume of gaseous thermolysis products increases by 260% in the case of n-nonanol and 80% in the case of n-decanol compared to non-irradiated solutions. It has been shown that the gas evolution rate and gas volume increase when the irradiated mixture saturated with nitric acid is heated. However, there are no prerequisites for the development of autocatalytic oxidation.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.114-125
• /
• 1993

Thermoelastoplastic analysis of a typical device consisting of fixed tube and movable case having an inital clearance in between, which is subjected to pressure and thermal load, has been carried out to examine the cause of malfunction mainly at high temperature condition, and to improve the design. Stresses, deformed shape, interface state and their effects on normal function of case are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of tube from the present design (Parallel type) to the improved design (Tapered type). This effect has been proved by sustained cyclic function test.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권11호
• /
• pp.544-550
• /
• 2002

This paper describes a strategy of a daily optimal operational scheduling on the industrial cogeneration system. The cogeneration system selected to establish the scheduling consists of three units and several auxiliary devices which include three auxiliary boilers, t재 waste boilers and three sludge incinerators. One unit generated electrical and thermal energy using the back pressure turbine. The other two units generate the energy using the extraction condensing turbine. Three auxiliary devices operate to supply energy to the loads with three units. The cogeneration system is able to supply enough the thermal energy to the thermal load, however it can not sufficiently supply the electric energy to the electrical load. Therefore the insufficient electric energy is compensated by buying electrical energy from utility. In this paper, the evolutionary algorithms was applied to establish the optimal scheduling for the cogeneration systems. Also the GUI System was developed using established mathematics medeling and evolutionary algorithms in order that non-experts are able to establish operational scheduling. This results revel that the proposed modeling and strategy can be effectively applied to cogeneration system for paper mill.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.494-501
• /
• 2000

This paper describes a strategy of a daily optimal operational scheduling in cogeneration system for paper mill. The cogeneration system selected to establish the scheduling consists of three units and several auxiliary devices. One unit generates electrical and thermal energy using the back pressure turbine. The rest two units generate the energy using the extraction condensing turbine. Three auxiliary boilers, two waste boilers and three sludge incinerators operate to supply energy to the loads with three units. The cogeneration system is able to supply enough the thermal energy to the thermal load, however it can not sufficiently supply the electrical power to the electrical load. Therefore the insufficient electric energy is compensated by buying electrical energy from utility. When the operational scheduling is performed considering the environmental problem. This paper shows the simulation results for daily operational scheduling obtained using the evolutionary algorithm. This results reveal that the proposed modeling and strategy can be effectively applied to cogeneration system for paper mill.

• KSBB Journal
• /
• 제17권1호
• /
• pp.44-48
• /
• 2002

Rhodotorula giutinis KCTC 7989내에 존재하는 카로티노이드를 효율적으로 추출하기 위한 방법에 대해 연구하였다. R. glutinis에 의해 생합성되는 카로티노이드의 조성은 torularhodin 61.7%, $\beta$-carotene 28.8%, torulene 9.5%이었다. 세포 내에 존재하는 카로티노이드를 추출하기 위해 HCI로 세포를 전처리할 경우 열처리의 병행이 중요한 인자였지만, DMSO를 사용한 경우는 열처리 유무에 큰 영향을 받지 않았다. 추출용매에 따라 추출되는 카로티노이드의 조성이 영향을 받았다. 특히 벤젠과 클로로포름은 torularhodin의 추출에 효과적이었으며, 디에틸에테르를 사용했을 때 카로티노이드의 전체 추출농도가 가장 높았다. 건조된 세포나 습한 세포에 비해 냉동 건조된 세포에서 카로티노이드의 추출효율이 높게 나타났다.