• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.637-640
• /
• 2023

This paper presents multimodal image fusion with human pose for detecting abnormal human behaviors in low illumination conditions. Detecting human behaviors in low illumination conditions is challenging due to its limited visibility of the objects of interest in the scene. Multimodal image fusion simultaneously combines visual information in the visible spectrum and thermal radiation information in the long-wave infrared spectrum. We propose an abnormal event detection scheme based on the multimodal fused image and the human poses using the keypoints to characterize the action of the human body. Our method assumes that human behaviors are well correlated to body keypoints such as shoulders, elbows, wrists, hips. In detail, we extracted the human keypoint coordinates from human targets in multimodal fused videos. The coordinate values are used as inputs to train a multilayer perceptron network to classify human behaviors as normal or abnormal. Our experiment demonstrates a significant result on multimodal imaging dataset. The proposed model can capture the complex distribution pattern for both normal and abnormal behaviors.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.39-43
• /
• 2003

열전달에 대해 고려하는 것은 LTCC와 같은 고밀도 회로기판을 설계하는데 매우 중요한 요소이다. 본 연구에서는 열전달 효과를 조사하기 위해서 LTCC 기판 내에 열 비아 및 패드를 위치시킨 기판을 제작하였다. 제작된 기판의 정확한 열적인 분석을 이해하기 위해서 Laser Flash Method에 의한 샘플의 열전도도 분석 및 수치해석을 수행하였다. 열비아 및 열방출을 위한 패드로 구성된 LTCC 기판의 열전도 특성은 순수 Ag재료의 44%인 103 W/mK 값을 초과하는 특성을 나타내었다. 수치해석에 의해서 LTCC 기판내의 비아 배열, 크기, 밀도 변화에 따른 열거동의 해석을 수행하였다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.25-31
• /
• 2017

This study investigates changes in the mechanical behaviors, especially hardness and indentation load-displacement curves, of thermal barrier coatings (TBCs) brought about by thermal shock. The TBCs on the Nickel-based bondcoat/superalloy was prepared with diameters of 25.4 mm and $600{\mu}m$ thickness. The results of thermal shock cycling test from $1100^{\circ}C$ of the highest temperature indicate that the thermal shock do not influence on the mechanical behavior, but a continuous decrease in porosity and increase in hardness were observed after 1200 thermal shock cycles; these changes are believed to be due to sintering of thermal barrier coating materials. The results that no degradation in the indentation load-displacement curves indicate that the coating shows good thermal shock resistance up to 1200 cycles at $1100^{\circ}C$ in air.

• 폴리머
• /
• 제24권3호
• /
• pp.350-357
• /
• 2000

인쇄회로기판제조에 사용되는 glass/epoxy 프리프레그의 경화거동을 dielectrometer와 시차주사열분석기를 사용하여 연구하였다. 브롬화한 에폭시수지를 많이 포함하고 있는 본 프리프레그는 약 115$^{\circ}C$에서 가장 낮은 이온점도를 보였으며, 이 이후 경화반응의 진행과 함께 점도가 15$0^{\circ}C$까지는 상승하는 경향을 보여 주었다. 이것은 이 프리프레그의 경화반응이 115$^{\circ}C$ 부근에서 개시됨을 의미하며, 이 온도 이후부터 가속화된 분자간 가교화반응을 통해서 분자량이 현저히 커짐을 의미한다. 본 프리프레그의 dynamic scan에 따른 loss factor 및 tan $\delta$ 값을 측정하였다. 또한 실제 인쇄회로기판 제조에 사용하는 경화주기에 준하여 동일한 실험을 수행하여 그 거동을 비교하였다. 성형한 복합재료는 약30$0^{\circ}C$까지는 열적으로 안정한 것으로 나타났으며 이 온도 이후에서 급격한 열분해 반응이 진행되었다.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.268-273
• /
• 2003

This paper presents hot spot behaviors on the rubbing surface of disk-pad type brake by using coupled thermal-mechanical analysis technique. The height of micro-asperity on the rubbing surface is usually 2∼3 ${\mu}$m in practical disk brakes. Non-uniform micro-contacts between the disk and the rigid friction pads lead to high local temperature distributions, which may cause the material degradation, and develop hot spots, thermal cracks, and brake system failure at the end for a braking period. The friction temperatures on the rubbing surface of disk brakes in which are strongly related to the hot spot and thermal related wears are rapidly concentrated on the micro-contact asperities during braking. The computed FEM results show that the contact stress, friction induced temperature and thermal strain are highly concentrated on the rubbing micro-contact asperities even though the braking speed and force are small during the braking period. This hot spot may directly produce the slippage and various thermal wears on the brake-rubbing surface.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.323-328
• /
• 2004

This study measured the thermal environment and residents' cooling behavior of the apartments' living rooms in summer in Seoul. The purpose of this study is to find out the present thermal environment of the living rooms and to find out the target figure of passive cooling system. The surveys and measurements took place in six apartments of Seoul for 60days(2004. 7. 3${\sim}$2004. 8. 31). The result were summarized as follows; The thermal environment of apartments' living rooms were almost neutral, and residents felt a little uncomfortable. Residents turned on the air conditioner at $27.31^{\circ}C$ of indoor temperature, and $28.89^{\circ}C$ of SET*. Therefore, cooling critical temperature of the passive cooling system can be figured out from this result.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.800-808
• /
• 1998

In this study the thermal stress distribution and deformantion characteristics resulting from the nonuniform temperature fields of the cylinder block of a light 3-cylinder 4-stroke gasoline engine were analyzed using the 3-dimensional finite element method. The temperature distributions req-uisite for the thermoelastic behavior alalysis were obtained from the steady-state heat conduction analysis performed on the basis of experimental data. in order to examine the effect of a ceramic material the cylinder liner was replaced by the silicon nitride($Si_{3}N_{4}$) and its thermal behaviors were compared with those of the original block.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.199-205
• /
• 1999

Using a coupled thermal-mechanical analysis, the thermal distortion of the ventilated disk brakes has been investigated based on the air cooling effects during 15 braking operations. The FEM results show that the bendings and distortions of the disk toward the left side are decreased, but the sinusoidal distortion of the disk rubbing surface along the arc length of the vent hole is highly increased by increasing the convective air cooling effects, which is heavily related to the squeal, wear and micro-thermal crackings at the rubbing surfaces due to uneven dissipation rates of friction heatings.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.93-98
• /
• 2013

Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. To successfully imprint a nanosized pattern with the thermal NIL, the process conditions such as temperature and pressure should be appropriately selected. This starts with a clear understanding of polymer material behavior during the thermal NIL process. In this paper, a filling process of the polymer resist into nanometer scale cavities during the thermal NIL at the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer. In the simulation, the filling process and the residual layer formation are numerically investigated. And the effects of pressure and temperature on NIL process, specially the residual layer formation are discussed.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.396-403
• /
• 2011

In this study, we investigated the mechanical behaviors of layered thermal barrier coatings by indentations. Various single and double-layered thermal barrier coatings were deposited by air plasma spray process using different type of commercialized YSZ (Yttria stabilized zirconia) starting powders. Indentation stress-strain curve, load-displacement curve and hardness of the single and the double-layered thermal barrier coatings were obtained experimentally and analyzed. The indentation damages at the same loads were compared, and thus, the results depend on the structure of each coating. The result indicates improvement in damage resistances from tailoring of layered structures in the component of gas turbine system is expected.