• Structural Engineering and Mechanics
• /
• 제8권4호
• /
• pp.421-438
• /
• 1999

In this paper a practical limit load estimating procedure is proposed for general pipe-elbow structures subjected to complex loading (in-plane and out-of-plane bending, internal pressure and axial force). The explicit calculating formulae are presented on the basis of theoretical analysis combined with numerical simulation. Von Mises' yield criterion is adopted in both analytical and numerical calculation. The finite element examination shows that the method provides a simple but satisfactory prediction of pipe structures in engineering plastic analysis.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.128-132
• /
• 2006

전통적으로 반도체의 신뢰성을 추정하는 방법은 생산 완료 후 수명검사 자료나 고객 양도 후 제품고장 자료로부터 얻어지는 후인형이다. 90년대에 들면서 제품의 수율과 신뢰성이 상호관련이 있다는 실험자료가 얻어짐에 따라 수율로부터 신뢰성을 예측할 수 있다는 연구결과가 발표되었다. 그 이후 제품 설계시에 수율에 기초하여 신뢰성을 고려할 수 있도록 하는 전도형 연구가 활발히 이루어지고 있다. 본 논문에서는 반도체 수율과 신뢰성을 통합할 수 있는 모형에 기초하여 수율과 신뢰성 사이의 관련성을 이론적으로 유도하고 증명하고자 한다.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.87-95
• /
• 2000

Residual stresses and deformations due to welding have effects on the strength of structures. In this paper, the compressive strength of basic welded structures is studied and the effects of the residual stresses and deformations on the compressive strength of beams, plates and shells are investigated,. Theoretical analysis for the basic structures is carried out and simplified methods to calculate the compressive strength are proposed. The proposed methods yield simple formulas to calculate the compressive strength, of which results are much helpful. The accuracy of the proposed method is revealed by comparison with experimental results.

• 대한수학회지
• /
• 제46권5호
• /
• pp.1105-1117
• /
• 2009

In this paper a parameter identification problem for a damped sine-Gordon equation is studied from the theoretical and numerical perspectives. A spectral method is developed for the solution of the state and the adjoint equations. The Powell's minimization method is used for the numerical parameter identification. The necessary conditions for the optimization problem are shown to yield the bang-bang control law. Numerical results are discussed and the applicability of the necessary conditions is examined.

• Journal of Microbiology and Biotechnology
• /
• 제20권4호
• /
• pp.828-834
• /
• 2010

An ethanol-producing yeast strain, CHFY0201, was isolated from soil in South Korea using an enrichment technique in a yeast peptone dextrose medium supplemented with 5% (w/v) ethanol at $30^{\circ}C$. The phenotypic and physiological characteristics, as well as molecular phylogenetic analysis based on the D1/D2 domains of the large subunit (26S) rDNA gene and the internally transcribed spacer (ITS) 1+2 regions, suggested that the CHFY0201 was a novel strain of Schizosaccharomyces pombe. During shaking flask cultivation, the highest ethanol productivity and theoretical yield of S. pombe CHFY0201 in YPD media containing 9.5% total sugars were $0.59{\pm}0.01$ g/l/h and $88.4{\pm}0.91%$, respectively. Simultaneous saccharification and fermentation for ethanol production was carried out using liquefied cassava (Manihot esculenta) powder in a 5-l lab-scale jar fermenter at $32^{\circ}C$ for 66 h with an agitation speed of 120 rpm. Under these conditions, S. pombe CHFY0201 yielded a final ethanol concentration of $72.1{\pm}0.27$ g/l and a theoretical yield of $82.7{\pm}1.52%$ at a maximum ethanol productivity of $1.16{\pm}0.07$ g/l/h. These results suggest that S. pombe CHFY0201 is a potential producer for industrial bioethanol production.

• Applied Biological Chemistry
• /
• 제38권1호
• /
• pp.26-30
• /
• 1995

돼지감자 분말을 원료로 alginate에 고정화된 Kluyveromyces marxianus FO43의 에탄올 생산성을 향상시키기 위한 연구를 수행하였다. 15% 돼지감자 배지에서 발효시킨 고정화 효모에 의한 에탄올 농도와 이론치에 대한 에탄올 수율은 4일 후에 각각 3.38%(w/v), 54.20%로 이것은 고정화하지 않은 효모의 3.76%(w/v), 71.13% 보다 낮았다. Cellulase의 첨가는 $15{\sim}20%$ 돼지감자 배지의 점조성을 크게 낮추어 고정화 효모의 에탄올 생산성을 증가시켰다. 그리하여 20% 배지에서도 효소를 처리하여 고정화 효모를 4일 발효 시키면 에탄올 농도를 5.57%(w/v), 이론치에 대한 에탄올 수율을 68.86%까지 얻을 수 있었다. Repeated batch culture를 실시한 결과 bead의 활성이 22일 동안 저하되지 않고 유지되었다.

• Composites Research
• /
• 제16권3호
• /
• pp.18-24
• /
• 2003

샌드위치 구조물들은 적은 무게의 첨가로 높은 강성(stiffness)을 요구하는 조선업에 널리 사용되어져 왔다. 국부하중 조건 하에서 샌드위치 구조물에 대한 디자인 변수들을 고려하는 것은 중요시되어졌다. 이 연구는 샌드위치 보의 강도에 대한 core층의 밀도, core층의 두께 그리고 face층의 두께 비율의 영향을 기술하였다. 이차원 탄성이론에 바탕을 둔 파손 하중은 AS4/3501-6 facing과 polyurethane foam core 샌드위치 보의 3점 굴곡 실험 결과와 잘 일치 하였다. 또한 그러한 파손 하중들은 face층의 비율의 변화와 함께 비교되었다. 파괴 mode들의 교차점으로 결정되어진 최적조건은 강도(strength)와 강성(stiffness)에 대한 샌드위치 빔의 최적 core 밀도의 값이 결정되었다. 추가적으로 강도에 대한 최적조건과 그렇지 못한 샌드위치 보에 대한 face 두께 비율 효과가 하중 길이에 따라 비교되었으며, 강도와 강성이 core/face무게 비율과 항께 검토하였다.

• Journal of Microbiology and Biotechnology
• /
• 제18권7호
• /
• pp.1257-1265
• /
• 2008

To lower the cost of ethanol distillation of fermentation broths, a high initial glucose concentration is desired. However, an increase in the substrate concentration typically reduces the ethanol yield because of insufficient mass and heat transfer. In addition, different operating temperatures are required to optimize the enzymatic hydrolysis (50$^{\circ}C$) and fermentation (30$^{\circ}C$). Thus, to overcome these incompatible temperatures, saccharification followed by fermentation (SFF) was employed with relatively high solid concentrations (10% to 20%) using a portion loading method. In this study, glucose and ethanol were produced from Solka Floc, which was first digested by enzymes at 50$^{\circ}C$ for 48 h, followed by fermentation. In this process, commercial enzymes were used in combination with a recombinant strain of Zymomonas mobilis (39679:pZB4L). The effects of the substrate concentration (10% to 20%, w/v) and reactor configuration were also investigated. In the first step, the enzyme reaction was achieved using 20 FPU/g cellulose at 50$^{\circ}C$ for 96 h. The fermentation was then performed at 30$^{\circ}C$ for 96 h. The enzymatic digestibility was 50.7%, 38.4%, and 29.4% after 96 h with a baffled Rushton impeller and initial solid concentration of 10%, 15%, and 20% (w/v), respectively, which was significantly higher than that obtained with a baffled marine impeller. The highest ethanol yield of 83.6%, 73.4%, and 21.8%, based on the theoretical amount of glucose, was obtained with a substrate concentration of 10%, 15%, and 20%, respectively, which also corresponded to 80.5%, 68.6%, and 19.1%, based on the theoretical amount of the cell biomass and soluble glucose present after 48 h of SFF.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1138-1147
• /
• 2018

Delayed hydride cracking (DHC) is an important failure mechanism for Zircaloy tubes in the demanding environment of nuclear reactors. The threshold stress intensity factor, $K_{IH}$, and critical hydride length, $l_C$, are important parameters to evaluate DHC. Theoretical models of them are developed for Zircaloy tubes undergoing non-homogenous temperature loading, with new stress distributions ahead of the crack tip and thermal stresses involved. A new stress distribution in the plastic zone ahead of the crack tip is proposed according to the fracture mechanics theory of second-order estimate of plastic zone size. The developed models with fewer fitting parameters are validated with the experimental results for $K_{IH}$ and $l_C$. The research results for radial cracking cases indicate that a better agreement for $K_{IH}$ can be achieved; the negative axial thermal stresses can lessen $K_{IH}$ and enlarge the critical hydride length, so its effect should be considered in the safety evaluation and constraint design for fuel rods; the critical hydride length $l_C$ changes slightly in a certain range of stress intensity factors, which interprets the phenomenon that the DHC velocity varies slowly in the steady crack growth stage. Besides, the sensitivity analysis of model parameters demonstrates that an increase in yield strength of zircaloy will result in a decrease in the critical hydride length $l_C$, and $K_{IH}$ will firstly decrease and then have a trend to increase with the yield strength of Zircaloy; higher fracture strength of hydrided zircaloy will lead to very high values of threshold stress intensity factor and critical hydride length at higher temperatures, which might be the main mechanism of crack arrest for some Zircaloy materials.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.933-940
• /
• 2012

Recently, it has been shown that quantum coherence appears in energy transfers of various photosynthetic lightharvesting complexes at from cryogenic to even room temperatures. Because the photosynthetic systems are inherently complex, these findings have subsequently interested many researchers in the field of both experiment and theory. From the theoretical part, simplified dynamics or semiclassical approaches have been widely used. In these approaches, the quantum-classical Liouville equation (QCLE) is the fundamental starting point. Toward the semiclassical scheme, approximations are needed to simplify the equations of motion of various degrees of freedom. Here, we have adopted the Poisson bracket mapping equation (PBME) as an approximate form of QCLE and applied it to find the time evolution of the excitation in a photosynthetic complex from marine algae. The benefit of using PBME is its similarity to conventional Hamiltonian dynamics. Through this, we confirmed the coherent population transfer behaviors in short time domain as previously reported with a more accurate but more time-consuming iterative linearized density matrix approach. However, we find that the site populations do not behave according to the Boltzmann law in the long time limit. We also test the effect of adding spurious high frequency vibrations to the spectral density of the bath, and find that their existence does not alter the dynamics to any significant extent as long as the associated reorganization energy is changed not too drastically. This suggests that adopting classical trajectory based ensembles in semiclassical simulations should not influence the coherence dynamics in any practical manner, even though the classical trajectories often yield spurious high frequency vibrational features in the spectral density.