Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Theoretical models of threshold stress intensity factor and critical hydride length for delayed hydride cracking considering thermal stresses

  • Zhang, Jingyu (Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University) ;
  • Zhu, Jiacheng (Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University) ;
  • Ding, Shurong (Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University) ;
  • Chen, Liang (Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institution of China) ;
  • Li, Wenjie (Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institution of China) ;
  • Pang, Hua (Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institution of China)
  • Received : 2018.05.24
  • Accepted : 2018.07.06
  • Published : 2018.10.25
Download PDF
⟨ Previous Next ⟩

Abstract

Delayed hydride cracking (DHC) is an important failure mechanism for Zircaloy tubes in the demanding environment of nuclear reactors. The threshold stress intensity factor, $K_{IH}$, and critical hydride length, $l_C$, are important parameters to evaluate DHC. Theoretical models of them are developed for Zircaloy tubes undergoing non-homogenous temperature loading, with new stress distributions ahead of the crack tip and thermal stresses involved. A new stress distribution in the plastic zone ahead of the crack tip is proposed according to the fracture mechanics theory of second-order estimate of plastic zone size. The developed models with fewer fitting parameters are validated with the experimental results for $K_{IH}$ and $l_C$. The research results for radial cracking cases indicate that a better agreement for $K_{IH}$ can be achieved; the negative axial thermal stresses can lessen $K_{IH}$ and enlarge the critical hydride length, so its effect should be considered in the safety evaluation and constraint design for fuel rods; the critical hydride length $l_C$ changes slightly in a certain range of stress intensity factors, which interprets the phenomenon that the DHC velocity varies slowly in the steady crack growth stage. Besides, the sensitivity analysis of model parameters demonstrates that an increase in yield strength of zircaloy will result in a decrease in the critical hydride length $l_C$, and $K_{IH}$ will firstly decrease and then have a trend to increase with the yield strength of Zircaloy; higher fracture strength of hydrided zircaloy will lead to very high values of threshold stress intensity factor and critical hydride length at higher temperatures, which might be the main mechanism of crack arrest for some Zircaloy materials.

Keywords

References

  1. M.P. Puls, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking, Springer, London, 2012.
  2. K.S. Chan, An assessment of delayed hydride cracking in zirconium alloy cladding tubes under stress transients, Int. Mater. Rev. 58 (2013) 349-373. https://doi.org/10.1179/1743280412Y.0000000013
  3. T. Kubo, Y. Kobayashi, H. Uchikoshi, Measurements of delayed hydride cracking propagation rate in the radial direction of Zircaloy-2 cladding tubes, J. Nucl. Mater. 427 (2012) 18-29. https://doi.org/10.1016/j.jnucmat.2012.04.012
  4. S. Shimada, E. Etoh, H. Hayashi, Y. Tukuta, A metallographic and fractographic study of outside-in cracking caused by power ramp tests, J. Nucl. Mater. 327 (2004) 97-113. https://doi.org/10.1016/j.jnucmat.2004.01.022
  5. A.A. Shmakov, R.N. Singh, D. Yan, R.L. Eadie, Y.G. Matvienko, A combined SIF and temperature model of delayed hydride cracking in zirconium materials, Comput. Mater. Sci. 39 (2007) 237-241. https://doi.org/10.1016/j.commatsci.2006.02.022
  6. S.Q. Shi, M.P. Puls, Criteria for fracture initiation at hydrides in zirconium alloys I. Sharp crack tip, J. Nucl. Mater. 208 (1994) 232-242. https://doi.org/10.1016/0022-3115(94)90332-8
  7. D. Wappling, A.R. Massih, P. Stahle, A model for hydride-induced embrittlement in zirconium-based alloys, J. Nucl. Mater. 249 (1997) 231-238. https://doi.org/10.1016/S0022-3115(97)00183-9
  8. Y.S. Kim, Y.G. Matvienko, Y.M. Cheong, S.S. Kim, S.C. Kwon, A model of the threshold stress intensity factor, KIH, for delayed hydride cracking of Zr-2.5Nb alloy, J. Nucl. Mater. 278 (2000) 251-257. https://doi.org/10.1016/S0022-3115(99)00249-4
  9. T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, third ed.ed, Taylor & Francis/CRC Press, Boca Raton, FL, 2005.
  10. J.R. Rice, M.A. Johnson, The Role of Large Crack Tip Geometry Changes in Plane Strain Fracture, Inelastic Behavior of Solids, 1970, pp. 641-672.
  11. S. Sagat, C.K. Chow, M.P. Puls, C.E. Coleman, Delayed hydride cracking in zirconium alloys in a temperature gradient, J. Nucl. Mater. 279 (2000) 107-117. https://doi.org/10.1016/S0022-3115(99)00265-2
  12. S. Sunil, A.K. Bind, H.K. Khandelwal, R.N. Singh, J.K. Chakravartty, Effect of specimen thickness on DHC velocity for Zr-2.5Nb alloy pressure tube material, J. Nucl. Mater. 467 (2015) 373-382. https://doi.org/10.1016/j.jnucmat.2015.10.003
  13. G.C. Sih, On the singular character of thermal stresses near a crack tip, J. Appl. Mech. 29 (1962) 587-589. https://doi.org/10.1115/1.3640612
  14. J.W. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material, J. Mech. Phys. Solid. 16 (1968) 13-31. https://doi.org/10.1016/0022-5096(68)90014-8
  15. J.R. Rice, G.F. Rosengren, Plane strain deformation near a crack tip in a power-law hardening material, J. Mech. Phys. Solid. 16 (1968) 1-12. https://doi.org/10.1016/0022-5096(68)90013-6
  16. M.P. Puls, Effects of crack tip stress states and hydride-matrix interaction stresses on delayed hydride cracking, Metall. Trans. A 21 (1990) 2905-2917. https://doi.org/10.1007/BF02647211
  17. S.Q. Shi, M.P. Puls, Fracture strength of hydride precipitates in Zr-2.5Nb alloys, J. Nucl. Mater. 275 (1999) 312-317. https://doi.org/10.1016/S0022-3115(99)00132-4
  18. R.N. Singh, P. Ståhle, A.R. Massih, A.A. Shmakov, Temperature dependence of misfit strains of d-hydrides of zirconium, J. Alloy Compd. 436 (2007) 150-154. https://doi.org/10.1016/j.jallcom.2006.07.049
  19. D.L. Hagrman, G.A. Reymann, MATPRO-version 11: a Handbook of Materials Properties for Use in the Analysis of Light Water Reactor Fuel Rod Behavior, Specific Nuclear Reactors & Associated Plants, 1979.
  20. X.S. Tang, Mechanical/thermal stress intensification for mode I crack tip: fracture initiation behavior of steel, aluminum and titanium alloys, Theor. Appl. Fract. Mech. 50 (2008) 92-104. https://doi.org/10.1016/j.tafmec.2008.07.001
  21. Y.S. Kim, S.S. Kim, S.C. Kwon, Y.M. Cheong, K.S. Im, Anisotropic threshold stress intensity factor, KIH and crack growth rate in delayed hydride cracking of Zr-2.5Nb pressure tubes, Metall. Mater. Trans. A 33 (2002) 919-925. https://doi.org/10.1007/s11661-002-0161-y
  22. J. Bair, M. Asle Zaeem, M. Tonks, A review on hydride precipitation in zirconium alloys, J. Nucl. Mater. 466 (2015) 12-20. https://doi.org/10.1016/j.jnucmat.2015.07.014
  23. T. Kubo, Y. Kobayashi, H. Uchikoshi, Determination of fracture strength of ${\delta}$-zirconium hydrides embedded in zirconium matrix at high temperatures, J. Nucl. Mater. 435 (2013) 222-230. https://doi.org/10.1016/j.jnucmat.2012.12.045
  24. A. Alvarez Holston, J. Stjarnsater, On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding, Nucl. Eng. Technol. 49 (2017) 663-667. https://doi.org/10.1016/j.net.2017.04.002

Cited by

  1. On the Delayed Hydride Cracking of the Pressure Tubes in Channel-Type Nuclear Reactors vol.2021, pp.4, 2018, https://doi.org/10.1134/s0036029521040285