• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.215-236
• /
• 2017

Obtaining accurate location information is important in practical applications of wireless sensor networks (WSNs). The distance vector hop (DV-Hop) is a frequently-used range-free localization algorithm in WSNs, but it has low localization accuracy. Moreover, despite various improvements to DV-Hop-based localization algorithms, maintaining a balance between high localization accuracy and good stability and convergence is still a challenge. To overcome these shortcomings, we proposed an improved DV-Hop localization algorithm based on the bat algorithm (IBDV-Hop) for WSNs. The IBDV-Hop algorithm incorporates optimization methods that enhance the accuracy of the average hop distance and fitness function. We also introduce a nonlinear dynamic inertial weight strategy to extend the global search scope and increase the local search accuracy. Moreover, we develop an updated solutions strategy that avoids premature convergence by the IBDV-Hop algorithm. Both theoretical analysis and simulation results show that the IBDV-Hop algorithm achieves higher localization accuracy than the original DV-Hop algorithm and other improved algorithms. The IBDV-Hop algorithm also exhibits good stability, search capability and convergence, and it requires little additional time complexity and energy consumption.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.171-180
• /
• 2005

Bending performances of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been evaluated using experimental tests combined with theoretical and finite element analyses. A finite element simulation for the three-point bending test was performed. Basic properties of aluminum materials used for initial input data of the finite element simulation were obtained from the true stress-true strain curves of specimens which had been extracted from the Al tube beams. True stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing, and true strains were obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens adhered by aluminum plates were employed fur the bending test. The bending deformation behaviors up to the maximum load described by the numerical simulation were in good agreement with experimental ones. After passing the maximum load, reinforcing plate was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed an excellent bending capability.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.197-201
• /
• 2018

There is a general consensus that many health care problems are attributable to the structural defects of the health care delivery system in Korea. The basic policy aimed to address these problems is to reform the delivery system so as that it incorporates two core principles: (1) stratification of medical care institutions into primary, secondary, and tertiary care providers according to the capability to perform specialized and complex services; (2) patients seeking care starting from the primary care provider and, if necessary, to be referred to the other provider step by step. This policy has been consistently pursued for about 30 years, but the achievement is far from success. Thus it is believed that the feasibility of the policy should be questioned. Starting from this question, based upon the observation of the current structure of the delivery system and its expected changes, the reform policy was discussed focusing on the assessment of its feasibility from both practical and theoretical viewpoints. The discussion leads to cast doubt on the policy for its possibility of making planned changes and producing expected desirable effects. Therefore it is advisable to investigate a wide range of alternative strategies and models for improving health care delivery.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.275-278
• /
• 2007

In family mold, defects are frequently occurred by an excessive packing the smaller volume cavity during molding. Although runner size could be optimized by CAE analysis or experimental data, the filling imbalance is hardly avoided in the actual injection molding process by various means. Before this study, we developed a variable-runner system for balancing the cavity-filling for three resins (ABS, LDPE, and PA66) in the family-mold, and examined the effect of cross-sectional area reduction of a runner in the system. In this study, we examined the conditions of the pressure and temperature in the system with a CAE analysis. We also analyzed the influence of the rheological characteristic of resins to the balancing-capability of the system in order to help mold designers easily adopt the variable-runner system to their design.

• Journal of Families and Better Life
• /
• v.14 no.2
• /
• pp.111-126
• /
• 1996

Debt was defined as all kinds of borrowings made by families in including credit card debt. The purpose of the study was to investigate the effects of family debt management on financial satisfaction. A model of debt management and financial satisfaction was developed based on the Deacon-Firebaugh's systems approach to family resource management and the variables comprising input throughput and output were based on the theoretical background asnd previous researches. Data were collected from 763 households' money managers residing in Seoul during Summer of 1995 and the statistical methods utilized included correlation coefficient multiple regression and path analyses. It was responded about 82% of the households had been indebted indicating the use of debt being a general way of living in this society. The results showed that financial satisfaction lowered with larger amount of monthly debt payment and with their uncertiainty regarding their capability to repay debt. The input which exerted direct effects on financial satisfaction were income asset financial expectations and family life cycle. And consumption demand on debt and easiness in extending credit had strong indirect effects on financial satisfaction via the throughput variables. The most powerful predictor of financial satisfaction via the throughput variables. The most powerful predictor of financial satisfaction was perceived difficulty in managing debt which was the instrumental output.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.551-560
• /
• 2012

Target detection by acoustic barrier method includes active and passive sonar technique and time reversal process whose theoretical background is already well defined. In this paper, the concept and theory of underwater detection by passive ocean time reversal is established. Also, the reason that this study was conducted was to investigate feasibility of complex mathematical modeling to provide some predictive capability for underwater acoustic barrier with passive time reversal. It may eventually lead to a useful predictive tool when designing underwater acoustic barrier detection system using the passive time reversal concept.

• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.1-17
• /
• 2010

There had been studied for a function of fashion illustration that has various capability of differentiation among fashion products since year 2000. A fashion products adopted the illustration is stand out not only to increase the goods profits by consumers who is willing to purchase the products with specified identity but also to execute differentiation strategy in a market. The aim of this study is the theoretical approach of fashion illustration and examined the development process of the products based on the supporting documents of cooperations, other records and actual application cases. Also, expression techniques of fashion illustration, image features and etc. are mainly studied and following representative results are projected through the data. First, the success of fashion commercialization using fashion illustration should have mutual organic function which requires three factors such as product project, marketing, the role of illustration. Second, An illustration of hand drawing expression technique is more helpful in differentiation of fashion product than using computer graphic, embroidery, collage technique and the fashion products vividly expressed with sensuous illustration tend to have higher preference. Third, the possibility of success the fashion products is often affected by the distinct identification and the precise positioning while the illustration is used.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.79-83
• /
• 2011

Magnetic seal uses a magnetic fluid to seal a gap between a rotating shaft and housing. It is distinguished from other kinds of seals from the fact that solid contact does not occur in the seal. This implies that it is free from solid rubbing thus dustless and provides a clean circumstance. That is the reason why the magnetic seal is used exclusively for most of vacuum chambers in semiconductor process where dustless clean circumstance is critical. A magnetic seal has been developed of which design parameters are determined based on published data, and an air pressure test has been done to examine its sealing capability. Effects of some design parameters have been studied through FEM analysis. The results show some notable aspects of design parameters and provide suggestions for developing the seals. Regarding the sealing capacity of the magnetic seal the factor to match the theoretical value with the actual one was found to be 0.4~0.7, which means still there is some discrepancy between theory and actual.

• Structural Engineering and Mechanics
• /
• v.12 no.6
• /
• pp.685-698
• /
• 2001

In this paper, a general method for the automatic search for Strut-and-Tie (S&T) models representative of possible resistant mechanisms in reinforced concrete elements is proposed. The representativeness criterion here adopted is inspired to the principle of minimum strain energy and requires the consistency of the model with a reference stress field. In particular, a highly indeterminate pin-jointed framework of a given layout is generated within the assigned geometry of the concrete element and an optimum truss is found by the minimisation of a suitable objective function. Such a function allows us to search the optimum truss according to a reference stress field deduced through a F.E.A. and assumed as representative of the given continuum. The theoretical principles and the mathematical formulation of the method are firstly explained; the search for a S&T model suitable for the design of a deep beam shows the method capability in handling the reference stress path. Finally, since the analysis may consider the structure as linear-elastic or cracked and non-linear in both the component materials, it is shown how the proposed procedure allows us to verify the possibilities of activation of the design model, oriented to the serviceability condition and deduced in the linear elastic field, by following the evolution of the resistant mechanisms in the cracked non-linear field up to the structural failure.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.273-278
• /
• 1999

A TDM-multiplexed fiber optic pressure/temperature sensor system utilizing fiber optic Fabry-Perot interferometers as sensing devices was developed and applied to measure water level variations and temperature variations. The maximum measurement speed of the system without saving measurement data is 4500 times per second and the response time of the sensors is thought to be ~ms. The difference between the theoretical value and the measured value for the scale factor of water level sensor and temperature sensor was +13.7%, -18% respectively. The nonlinearity of the sensors after calibration was less than 1%. The sensor system was applied to verify the capability of measuring the temperature variations and water level variations at a high speed.