• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2020

Cine-Hangeul is a program that can predict the running time of a movie based on the screenplay before production. This paper seeks to verify the prediction reporting function of Cine-Hangeul, which is the standard Korean screenplay format. Moreover, this paper presents a method to increase the accuracy of the Cine-Hangeul reporting function. The objective of this paper is to offer a correction method based on scientific evidence because the current Cine-Hangeul reporting function has many errors. The verification process for five scenarios and movies confirmed that the default setting value of Cine- Hangeul's screening time prediction reporting was many errors. Cine-Hangeul analyzes the amount of textual information to predict the time of the scene and the time of the dialogue and helps predict the total time of the movie. Therefore, if a certain amount of text information is not available, the accuracy is unreliable. The current Cine-Hangeul prediction report confirms that the efficiency is high when the scenario volume is about 90 to 100 pages. As a result, prediction of screening time by Cine-Hangeul, a Korean scenario standard format program, confirmed the verification that it could secure the same level of reliability as the actual screening time by correcting the reporting settings. This verification also affirms that when applying about 50 percent of the basic set of screening time reporting, it is almost identical to the screening time.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.4
• /
• pp.133-141
• /
• 1997

In order to treat the landfill leachate, $UV/TiO_2/H_2O_2$ system connected with biological treatment was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. It was more profitable to put $H_2O_2$ into the system in the early stage for the sample which was treated with $H_2SO_4$ to decrease alkalinity and with $FeCl_3-6H_2O$ flocculation. Because the required reaction time run up by increasing $H_2O_2$ input amount, though the COD was reduced slightly, the optimal $H_2O_2$ input amount should be determined for the desired COD and the economical efficiency. The appropriate way to get the lowest COD in the shortest time was the method to treat the sample which was controlled to pH 3.5 after adjusting to pH 12 and put 500 ppm $H_2O_2$ into the system. In that case, to increase $H_2O_2$ input amount was not profitable for the system efficiency. The sufficient photocatalytic excited time was required to reduce the photocatalytic decomposition time for the sample which was gone through the alkali state.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.55-65
• /
• 1999

Metallurgical factors influencing toughness of the Intercritically Reheated Coarse-Grained Heat Affected Zone (ICCG HAZ) of multiple welded SA508-cl.3 Reactor Pressure Vessel Steel were evaluated. The recrystallized austenite formed along the prior austenite grain boundaries and late interfaced on heating to the intercritical range was transformed to bainite and/or martensite during cooling. The newly formed martensite always included some retained austenite(M-A constituents). The characteristics(amount, hardness, density, and size) of M-A constituents were found to be strongly associated with both peak temperature and cooling time(△t8/5(2)) of last pass. Toughness in the ICCG HAZ was deteriorated with increasing amount of M-A constituents which was increased with increasing the last peak temperature within the intercritical temperature range. Meanwhile, for the same intercritical peak temperature, toughness was decreased with increasing cooling time. When cooling time was short, the dominant factor influencing toughness of the ICCG HAZ was amount of M-A constituents. However, when cooling time was lengthened, the hardness difference between M-A constituents and softened matrix(tempered martensite) was found to be the dominant factor.

• Human Ecology Research
• /
• v.55 no.5
• /
• pp.465-480
• /
• 2017

This study examined the relationship between family meal time and emotional well-being for 5,186 fathers who were employed and had at least one child aged under 18 for the years 2009 and 2014 by analyzing their time diaries. In doing so, changes in time spent by fathers on family meals between 2009 and 2014 were also examined along with the factors associated with the amount of meal time for each year in order to understand ways to increase paternal participation in family meals. Analytic results showed that a father's family meal time had a positive association with his time use and life satisfaction; however, fathers who spent more than 40 minutes a day having meals with the family reported the highest score in time use and life satisfaction. The amount of time fathers spent on family meals increased from 38 minutes in 2009 to 43 minutes in 2014, whose change turned out to be mainly attributable to something more than the compositional change in the population between the two years, such as growing public awareness or cultural acceptance of the value of family meal. Fathers in dual-earner households tend to have longer family meal times; however, different factors were associated with their family meal times in 2009 and 2014. Policy implications are discussed in light of the government-initiated dining table education campaign to increase family meal time for the sake of children's character education at home.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.365-369
• /
• 2015

In this study, the bulk and solution polymerizations of L-lactide using an aluminium compound, methylaluminoxane (MAO), were performed. In the bulk polymerization, the conversion of polymerization was increased with increasing the amount of catalyst in feed. The largest molecular weight (Mw), 60800 g/mol, was shown at the MAO amount in feed of 0.15 mmol, and Mw was decreased above 0.15 mmol of MAO in feed. At the 0.15 mmol of MAO in feed, turn of frequency (TOF) was the highest, and it was decreased with increasing MAO amount in feed. In the solution polymerization, the induction time of 30 min was shown. The conversion of polymerization was linearly increased with the polymerization time, and the highest Mw, 54700 g/mol, was achieved at the polymerization time of 6 h.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.426-429
• /
• 2006

We investigated the electrooptical properties of a carbon nanotube (CNT)-doped nematic liquid crystal (LC) cell. Experimental results reveal that the doped CNTs influence the elastic constant of LC-CNT dispersion. Using a small amount of CNT dopant, the rise time of the LC cell is nearly invariant; the threshold voltage of the cell increases due to the increase in the elastic constant of LC-CNT dispersion. At a higher CNT concentration, the marked increase in the dielectric anisotropy of LC-CNT dispersion markedly decreases the rise time and threshold voltage of the LC cell. The fall time of this cell decreases with increasing CNT concentration due to the increase in elastic constant and the slight increase in viscosity of LC-CNT dispersion. The rise time and the fall time of the LC cell are decreased simultaneously when the LC host is doped with a moderate amount of CNT dopant.

• Journal of Korean Academy of Nursing
• /
• v.17 no.2
• /
• pp.116-121
• /
• 1987

This study was undertaken to elucidate effects of ingesting small or large amount of tap or iced water on circulation of normal healthy men with the purpose of furnishing basic data for nursing intervention of myocardial infarction patients. The subjects for this study were normal healthy men consisting of 30men and 30women in age from 22 to 30 years. One group consisting of 30men drank 240m1 tap water on day l and 240m1 iced water 24hours later. The other group drank 960m1 tap water on day 1 and 960m1 iced water 24hours later. Blood pressure and heart rate were taken in a sitting position before ingesting water, and immediately after ingesting it and at 2,5,10,15,30 minute intervals thereafter. Changes of heart rate, systolic and diastolic blood pressure after ingesting water were compared with those of preingestive period. The results obtained were as follows : 1. There were no significant changes in blood pressure and heart rater after ingesting small amount of water regardless of its temperature. 2. No significant decrease in blood pressure after ingesting large amount of tap water at all time peroids was noted. 3. A strongly significant interaction effect bet-ween temperature and volume was demonstrated, that is, there was a highly significant decrease in blood pressure and heart rate at all time periods after ingesting large amount of iced water.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2451-2454
• /
• 2003

In this paper, we propose the computation reduction methods of LSP(Line spectrum pairs) transformation that is mainly used in CELP vocoders. In order to decrease the computational time in real root method the characteristic of four proposed algorithms is as the following. First, scheme to reduce the LSP transformation time uses met scale. Developed the second scheme is the control of searching order by the distribution characteristic of LSP parameters. Third, scheme to reduce the LSP transformation time uses voice characteristics. Developed the fourth scheme is the control of searching interval and order by the distribution characteristic of LSP parameters. As a result of searching time, computational amount, transformed LSP parameters, SNR, MOS test, waveform of synthesized speech, speech, spectrogram analysis, searching time reduced about 37.5％, 46.21％, 46.3％, 51.29％ in average, computational amount is reduced about 44.76％, 49.44％, 47.03％, 57.40％. But the transformed LSP parameters of the proposed methods were the same as those of real root method.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.257-260
• /
• 2010

In this paper, we propose the computation reduction methods of LSP(Line spectrum pairs) transformation that is mainly used in CELP vocoders. In order to decrease the computational time in real root method the characteristic of four proposed algorithms is as the following. First, scheme to reduce the LSP transformation time uses mel scale. Developed the second scheme is the control of searching order by the distribution characteristic of LSP parameters. Third, scheme to reduce the LSP transformation time uses voice characteristics. Developed the fourth scheme is the control of searching interval and order by the distribution characteristic of LSP parameters. As a result of searching time, computational amount, transformed LSP parameters, SNR, MOS test, waveform of synthesized speech, spectrogram analysis, searching time is reduced about 37.5%, 46.21%, 46.3%, 51.29% in average, computational amount is reduced about 44.76%, 49.44%, 47.03%, 57.40%. But the transformed LSP parameters of the proposed methods were the same as those of real root method.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.2
• /
• pp.72-84
• /
• 2017

In this work, electrophoretic paint (E-paint) was deposited on AZ31 Mg alloy after four different surface pretreatments: knife abrading, SiC paper abrading, deionized (DI) water immersion and NaOH immersion. The deposition process of E-paint was studied by analyses of voltage-time and current-time curves, amount of deposited paint, current efficiency and surface oxide film resistance and the adhesion of E-paint was examined by tape test before and after immersion in DI water for 500 h at $40$^{\circ}C$. It was found that the induction time for the deposition, the amount of deposited paint and the current efficiency are inversely proportional to the resistances of surface films prepared by different surface pretreatment methods. The electrophoretic painting showed longer inductance time, larger amount of deposited paint and higher current efficiency on the highly conducting surfaces, such as knife-abraded and SiC-abraded surfaces than on the less conducting surfaces, such as DI water-immersed and NaOH-immersed samples. Excellent adhesion was observed on the E-paintings deposited onto knife-abraded and SiC-abraded AZ31 Mg alloy samplesSiC-abraded AZ31 Mg alloy samples.