• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.83-88
• /
• 2010

For the evaluation of our laboratory's 11-nor-${\Delta}^9$-tetrahydrocannabinol-9-carboxylic acid (THCCOOH) urinalysis test, THCCOOH urinalysis test was carried out with Certified Reference Material (CRM). The used CRM was THCCOOH in freeze-dried urine produced by NIST as Standard Reference Material 1507b. Comparing the estimated value of our laboratory with CRM, the results was coincided in the confidence level of approximately 95%.

• Journal of Information Management
• /
• v.41 no.3
• /
• pp.1-26
• /
• 2010

The purpose of this study is to compare and analyze the print form of UDC(Universal Decimal Classification) standard edition which was published by British Standards Institution in 2005 to Korean edition which was published by Korea Scientific & Technological Information Center in 1973, and to suggest the appropriate revision directions of future Korean edition. This study suggests that the future Korean edition should be revised based on the Master Reference File and should be a print edition which is composed of systematic tables and alphabetical index from the standard edition. In addition, the future Korean edition needs to strengthen international universality and to extend synthetic method using its auxiliary tables.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.4
• /
• pp.413-419
• /
• 1991

This study aims to evaluate the degree of malnutrition of children by three nutritional indicators-Weight for Age, Hight for Age, Weight for Height. The results are as follows; The average height and weight of children are much lower than Korea average height and weight. In terms of Weigh for Age, 20-40% of the samples belongs to below-2 standard deviation from the mean of reference group. 90% of the samples falls into the region below the mean. The standard deviation score indicates negative sign for eighty to ninety percent of the samples. The malnutrition of the samples is also confirmed in terms of Height for Age. In terms of Weight for Height, the mean of the samples is not significantly different from that of the reference group. Tests of the nutritional status under basis of three nutritional indicators show that approximately 50% of the samples had suffered from malnutrition and 17% of the samples have suffered from malnutrition.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.174-180
• /
• 2015

This study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses safety culture impact index (SCII) to monitor the status of safety culture of the NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of the NPPs. As a result of applying SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of the NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.439-446
• /
• 2013

In this research, the present standard analytical methods for the monitoring of air pollution levels established by the Korean Ministry of Environment (KMOE) were examined in reference to the recent outputs of several research projects conducted for their amendments. The evaluation of the two criterion methods between the main (the present guideline) and reference methods (the proposed alternate guideline) was made in terms of authenticity and reliability of the quality assurance (QA) and of compatibility of methods. The results of this comparative evaluation are presented for the analysis of both ambient air and source samples. Based on this analysis, we propose a new direction for the future amendment.

• Journal of Veterinary Clinics
• /
• v.40 no.2
• /
• pp.130-134
• /
• 2023

A 12-year-old Standard Poodle presented with intermittent weakness and occasional dyspnea at the Veterinary Medicine Teaching Hospital of Kangwon National University. A grade of 4 out of 6 systolic murmur with an irregular tachycardic rhythm was auscultated on both sides of the chest. Systolic blood pressure was 140 mmHg. Panting was noticed in the hospital, but there was no crackle sound. Blood analysis revealed mild increases in liver panel levels (alanine aminotransferase 149 [reference interval, 19-70] U/L; and alkaline phosphatase, 185 [reference interval, 15-127] U/L) and severe increases in cardiac biomarker levels (n-terminal pro-brain natriuretic peptide, 4169 [reference interval, 50-900] pmol/L; and cardiac troponin I, 0.22 [reference interval, 0.03-0.12] ng/mL). On electrocardiography, irregularly irregular supraventricular tachycardic rhythm with an f-wave and no distinct p-wave was observed. Generalized cardiomegaly with an enlarged right atrium and left ventricle was confirmed on thoracic radiography. Moreover, hepatomegaly and an enlarged caudal vena cava were observed. Echocardiographic evaluation revealed a fibromuscular diaphragm in the right ventricle. Because of the obstructive lesion in the right ventricle, the right atrium and ventricle were enlarged (right atrial area index, 38.82 cm²/m² [reference interval, 4.2-10.2 cm²/m²]; right ventricle end-diastolic area index, 14.152 cm²/m² [reference interval, 4.9-10.92 cm²/m²]). Accordingly, the patient was diagnosed with double-chambered right ventricle (DCRV). Pimobendan, furosemide, enalapril, diltiazem, and S-adenosylmethionine (SAMe) were prescribed, and all symptoms were relieved. DCRV is a right-sided congenital heart defect resembling pulmonic valve stenosis. If symptoms are not severe, medical therapy can be facilitated without surgery or the balloon dilation.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.54-57
• /
• 2002

In this paper model reference adaptive control (MRAC) of linear time-varying(LTV) systems is considered. MRAC for a linear time invariant(LTI) system does not assure the boundedness of the output and parameter estimation errors in the presence of time variations of the parameters. However, changing the adaptive laws such as use of $\sigma$-modification can result in the boundedness of the output and parameter estimation errors[5]. Together with the $\sigma$-modification in the adaptive law, we also modify the control law by adding an additional term to the standard control law. The additional term leads to smaller bounds of the output and parameter estimation errors when compared to the case where only the standard control law is applied.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.3
• /
• pp.57-62
• /
• 1992

In this paper, the reasonable design standard of Demand Factor for large office buildings is introduced that was made by the statistical way considering actual conditions, such as investigated electrical equipment capacity, electrical power consumption, etc. The results are as follows. 1) It is shown that th saving of electrical equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electrical power rates can be contributed by the application of the design standard. 2) The effect of reduction is showed to confirm the practical use of the proposed reference Demand Factor, and also, it is believed that this proposed reference Demand Factor will be useful in electrical equipment operation and planning.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.2
• /
• pp.119-145
• /
• 2016

This study aims to develop the records management standard table of the college of education through mapping transaction and records folder based on identifying the problems of the college of education. For these purpose, the study analyzed the records classification system of the all college of education. And then, drew out the business transaction items for records management standard table of the college of education based on the records management standard table of the local governments. Consequently, based on analysis, this study developed the records management standard table and suggested efficient management plan to apply Business Reference Model(BRM) to the college of education in 2017.