• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.664-670
• /
• 2010

The study on mechanical behavior of the structure at the site includes experimental method and numerical analysis method. Experimental method is categorized into true-scale test and laboratory model test. A laboratory model test is to monitor the failure mechanism with a model simulated similar with a real ground so as to identify the quantitative result, while a true-scale model test is the approach which enables to identify the potential problems that may occur with a simulated construction situation similar with a real site circumstance. Thus this study was intended to carry out the experimental test of non open-cut excavation by pipe roof method which is mostly common in domestic sites. as well as was aimed at identifying the ground behavior occurred during pipe penetration using laboratory model test. Appropriate reduced-scale model was selected, taking into account of domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out based on a certain ground loss volume depending on excavation after categorizing trackbed settlement pattern by depth of top soil.

• 정보화정책
• /
• 제24권1호
• /
• pp.30-47
• /
• 2017

정부는 공공데이터의 품질관리 수준을 평가하기 위해 국제표준을 기반으로 공공데이터 품질관리 조직 성숙도 모델을 개발하였다. 그러나 현장에 적용하기에는 평가항목이 너무 많다는 지적에 따라 평가지표 수를 축소한 새로운 모델을 보완 개발하였다. 이를 위하여 프로세스를 통합 및 조정하여 프로세스 수를 축소하였으며 프로세스능력수준이 아닌 새로운 활동능력수준 기반의 평가 방식을 제안하였다. 또한, 공공데이터 품질관리 성숙수준을 다섯 개의 레벨로 표현하는 방식과 1~5 사이의 실수로 표현하는 방식을 제안하였다. 그리고 새로 제안한 모델의 특성을 기존의 조직 성숙도 모델과 비교 분석하였다.

• 복합신소재구조학회지
• /
• 제6권4호
• /
• pp.19-28
• /
• 2015

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.161-166
• /
• 1998

In this paper, an approach to the reduced order H$_{\infty}$ controller synthesis is proposed. This approach employs the frequency weighted model reduction whose frequency weights are deduced from the closed-loop system regarding the controller order reduction errors as uncertainties in a plant, while the resultant reduced order H$_{\infty}$ controller guarantees prescribed H$_{\infty}$ control performances.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.1-5
• /
• 1986

In order to improve the net-mouth height of dragged gears, the authors devised models of floatingcollars of nylon cloth instead of floats and experimented with 4 types-A type (length 65em, breadth 3em), B type (length 65em, breadth 4em), C type (length 65em, breadth 5em) and D type (length 65 em, breadth 6em) attached respectively to the front edge of square of a model net after preliminary experimentation. These various types of floating collars were experimented in a circulating water channel to evaluate the characteristics of net-mouth height and hydrodynamic resistance and the effect of the length of bridles were also examined. The results obtained were as follows: 1. In case of attaching floats, the model net-mouth height reduced from 80 em to 20 em when current velocity was increased from 0.25m/see to 1m/sec. 2. In case of attaching floating collars, the model net-mouth heights were maintained 70 em, 71 em, 80 em, 78 em in maximum and 55 em, 63 em, 69 em, 73 em in minimum respectively even the current volocity was increased from 0.25 m/see to 1 m/see. 3. The model net-mouth height was reduced to 10 em maximum according to the current velocity and types of floating collars when the bridles were shortened 3~4 mm in length. 4. Hydrodynamic resistance of D type only was increased to 700 g in maximum and those of A, B, C type were reduced to 460 g in maximum at current velocity beyond 0.5 m/ see when bridles were shortened 3-4 mm in length. 5. But the model net-mouth heights became higher in accordance with breadth of floating coliars, B type was the best for this model net in case that hydrodynamic resistance was taken into account.

• 한국지반공학회지:지반
• /
• 제8권3호
• /
• pp.13-22
• /
• 1992

Model pile tests using calibration chamber are performed in !his paper in order to clarify the effect of the fundamental differences between the newly developed SPLT(Simple Pile Loading Test)and the conventional pile loading test on the pile bearing capacity. They are : (1) the direction of the applied load to mobilize the skin friction ; and (2) the use of reduced sifted sliding core. The conclusions obtained from the model pile tests are as follows : (1) The skin friction in tension loading is found to be somewhat smaller than that in compression loading. The average ration is 0.73 with the coefficient of variation (COV) of 0.18. (2) The ratio of the tip resistance rosin연 the reduced sized sliding core to that using the whole shoe shows wide scattering ; its average is 0.99 and the COV is 0.28. The aver - age of 0.99 means that there is no considerable difference in the tip resistance whether the reduced sized sliding core or the whole shoe is used, on condition that penetration depth ratio is larger than 4 : if the boundary effect of the chamber test is considered, the resistance of the whole shoe might be even larger.

• 대한의용생체공학회:의공학회지
• /
• 제11권2호
• /
• pp.249-256
• /
• 1990

In this study, LPC cepstrum coefficients are used as feature vector extracted from AR model of EMG signal, and a reduced-connection network whlch has reduced connection between nodes is constructed to classify and recognize EMG functional classes. The proposed network reduces learning time and improves system stability Therefore it is Ehown that the proposed network is appropriate in recognizing function of EMG signal.

• East Asian mathematical journal
• /
• 제37권5호
• /
• pp.567-576
• /
• 2021

In this paper, we deal with the pricing of vulnerable power exchange option. We consider the hybrid model as the credit risk model. The hybrid model consists of a combination of the reduced-form model and the structural model. We derive the closed-form pricing formula of vulnerable power exchange option based on the change of measure technique.

• 대한한방내과학회지
• /
• 제36권4호
• /
• pp.447-457
• /
• 2015

Objectives: This study was undertaken to investigate how Cortex Phellodendri affects metabolic functional change in an experimental rat model of obesity.Methods: An obesity model was induced in a C57BL/6 mouse with a high-fat diet. Mice were divided into three groups (n=6) of normal diet, high-fat diet (=control), and high-fat diet with Cortex Phellodendri. After 12 weeks, we measured the three mice groups’ body weight, FBG, FBI, HOMA-IR, OGTT, the weight of epididymal fat and liver, the percentage of ATM, and the gene expression of TNF-α, IL-10, and CD68.Results: Cortex Phellodendri significantly reduced blood glucose and oral glucose tolerance levels. It also reduced ATM numbers and TNF-α and CD68 gene expression and increased IL-10 gene expression.Conclusions: This study suggests that Cortex Phellodendri normalized the blood glucose and reduced the expression of inflammatory markers. However, with respect to other indicators of metabolic function in obesity, there were no significant results.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1105-1113
• /
• 2003

In the gas wiping process of continuous hot-dip galvanizing, edge overcoating develops near the edge of the steel strip. The overcoating is supposed to occur due to the reduced impact pressure of wiping gas on the strip surface. The purpose of this study is to investigate the effect of edge vortex on the reduced impact pressure. Three-dimensional unsteady flows are simulated using a commercial code, STAR-CD. Standard k-$\varepsilon$ model is used as a turbulence model. It is found that an alternating vortex structure in the vicinity of strip edge is developed by buckling of opposed jet streams and that the reduced amount of impact pressure at strip edge becomes smaller as the air knife gets closer to the strip. The effect of edge baffle on the reduced impact pressure is also investigated.