• 제목/요약/키워드: the property (H)

검색결과 2,936건 처리시간 0.034초

HOLOMORPHIC FUNCTIONS AND THE BB-PROPERTY ON PRODUCT SPACES

  • Boyd, Christopher
    • 대한수학회지
    • /
    • 제41권1호
    • /
    • pp.39-50
    • /
    • 2004
  • In [25] Taskinen shows that if $\{E_n\}_n\;and\;\{F_n\}_n$ are two sequences of Frechet spaces such that ($E_m,\;F_n$) has the BB-property for all m and n then (${\Pi}_m\;E_m,\;{\Pi}_n\;F_n$) also has the ΒΒ-property. Here we investigate when this result extends to (i) arbitrary products of Frechet spaces, (ii) countable products of DFN spaces, (iii) countable direct sums of Frechet nuclear spaces. We also look at topologies properties of ($H(U),\;\tau$) for U balanced open in a product of Frechet spaces and $\tau\;=\;{\tau}_o,\;{\tau}_{\omega}\;or\;{\tau}_{\delta}$.

수산을 사용한 크롬도금의 광택성에 미치는 도금액의 조성과 도금조건의 영향 (Effect of Bath Compositions and Plating Conditions for Decorative Properties of Chromium Deposits using Oxalic Acid)

  • 오이식;박정덕
    • 동력기계공학회지
    • /
    • 제5권3호
    • /
    • pp.80-87
    • /
    • 2001
  • Decorative properties of chromium depositions from oxalic acid bath containing chromium oxide and ammonium sulfate have been examined over a wide range of bath compositions and plating conditions. The obtained results from this experiment are summarized as follow: The followings were determined as a optimum conditions, bath compositions; $CrO_3\;200{\sim}250\;g/{\ell},\;H_2C_2O_4{\cdot}2H_2O\;500{\sim}700\;g/{\ell},\;(NH_4)_2SO_4\;40{\sim}120\;g/{\ell}$, and operation conditions; pH $2.0{\sim}2.5$, current density $15{\sim}250\;A/dm^2$ at bath temperature range of $30{\sim}80^{\circ}C$. Bright chromium deposits were obtained over a wide range of ammonium sulfate concentration and bath temperature. Decorative property for chromium deposition was adopted to apply stoichiometric ratio of $CrO_3$ concentration and $H_2C_2O_4{\cdot}2H_2O$.

  • PDF

DILATIONS FOR POLYNOMIALLY BOUNDED OPERATORS

  • EXNER, GEORGE R.;JO, YOUNG SOO;JUNG, IL BONG
    • 대한수학회지
    • /
    • 제42권5호
    • /
    • pp.893-912
    • /
    • 2005
  • We discuss a certain geometric property $X_{{\theta},{\gamma}}$ of dual algebras generated by a polynomially bounded operator and property ($\mathbb{A}_{N_0,N_0}$; these are central to the study of $N_{0}\timesN_{0}$-systems of simultaneous equations of weak$^{*}$-continuous linear functionals on a dual algebra. In particular, we prove that if T $\in$ $\mathbb{A}$$^{M}$ satisfies a certain sequential property, then T $\in$ $\mathbb{A}^{M}_{N_0}(H) if and only if the algebra $A_{T}$ has property $X_{0, 1/M}$, which is an improvement of Li-Pearcy theorem in [8].

Alignment property change in DLC alignment layer containing various hydrogen concentration

  • Kim, Jong-Bok;Kim, Kyung-Chan;Ahn, Han-Jin;Hwang, Byung-Har;Baik, Hong-Koo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.378-380
    • /
    • 2005
  • Diamond like carbon (DLC) films are known that they show homogeneous alignment property when they are irradiated by Ar ion beam. The DLC films in most of studies were deposited by CVD and contain large mount of hydrogen. In order to identity the hydrogen effect on alignment property, DLC films is deposited by RF magnetron sputter using various ratio of Ar and H2 as reactive gas. DLC films are characterized by FT-IR, Raman and contact angle. Alignment property is estimated by measuring pretilt angle.

  • PDF

과불소 폴리에테르 포함 새로운 실란형 올리고머의 합성과 표면 특성 (Synthesis and Surface Characteristics of Novel Oligomeric Silane with Perfluoropolyether)

  • 박은영;이상구;하종욱;박인준;이수복;이용택
    • 폴리머
    • /
    • 제32권4호
    • /
    • pp.397-402
    • /
    • 2008
  • 과불소 에테르 화합물(PFPE)은 높은 접촉각 및 낮은 표면에너지, 우수한 윤활제 성질과 방오성의 특성을 가지고 있어 산업적으로 많은 관심을 받아왔다. 반면에, 합성단계의 복잡성과 위험성을 갖고 있어 많은 연구가 되어 오지 못했다. 본 연구에서는 과불소 폴리에테르 올리고머 형태의 새로운 실란화합물을 합성하고 $^{19}F$-NMR 및 $^1H$-NMR을 통하여 구조분석 하였다. 또한 코팅필름의 접촉각 및 흐름각, 내오염성 등 표면 특성을 조사하였다. 그 결과, 기존의 방오성 필름보다 낮은 흐름각과 우수한 내오염성의 특징을 보여 방오성 필름 코팅 제로서 산업적 가능성을 확인하였다.

전기성형법을 이용한 치과용 금속-도재관의 소성에 따른 물성 변화가 변연 간격에 미치는 영향 (Effects of Property Transformation and Marginal Gap Depending on Heat-Treatment of Metal-Porcelain by Gold Electro-Forming System)

  • 김치영;정인성;최성민
    • 한국콘텐츠학회논문지
    • /
    • 제10권6호
    • /
    • pp.352-359
    • /
    • 2010
  • 본 연구에서는 전기성형법을 이용한 금속-도재관의치의 도재소성에 따른 물성변화와 변연간격을 측정하여 변연 적합도에 미치는 영향을 고찰하여 정밀성을 평가하고자 한다. 물성변화와 변연간격을 관찰하기 위하여 물성 관찰시편은 소성 횟수를 고려하여 소성을 0회(HC), 1회(H1), 2회(H2), 3회(H3) 실시한 군으로 분류하였으며, 변연간격 관찰시편은 전용결합재 처리 군(FS), 전용결합재와 opaque 처리 군(FO), 전용 결합재와 opaque와 bady를 처리한 군(FB) 그리고 소성이 없는 군(FC)으로 분류하였다. 물성 관찰시편의 미소경도 관찰결과 대조군(HC)에 비하여 시험군(H1, H2, H3)의 경도가 감소하는 것을 관찰 할 수 있었다(p<0.05). 그리고 변연간격 관찰결과 GES 금속-도재관의 제작과정 중 발생하는 도재의 소성 횟수가 변연부에는 영향을 주지 않는 것을 관찰할 수 있었다(p>0.05).본 연구를 종합하여 분석한 결과 소성과정에서 열에 의한 연화열처리 효과로 경도감소가 발생하지만 변연간격에는 영향을 미치지 않은 결과를 얻어 GES 금속-도재관의 제작과정에서 도재소성으로 인한 변연 적합도 변화는 없으며 정밀도에도 영향을 미치지 않는 것으로 판단된다.