• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.63-72
• /
• 2024

Poly (butylene adipate-co-terephthalate) (PBAT) is one of the representative biodegradable polymers with high ductility and processability to replace petroleum-based polymers. Many investigations have been conducted to broaden the applications of PBAT in a variety of industries, including the food packaging, agricultural mulching film, and logistics and distribution fields. Foaming process is widely known technique to generate the cell structure within the polymer matrix, offering the insulation and light weight properties. However, there was no commercially feasible foam product based on biodegradable polymers, especially PBAT, and maintaining a proper melt viscosity of the polymer would be a key parameter for the foaming process. In this study, chemical foaming agent and cross-linking agent were introduced to PBAT, and a compression molding process was applied to prepare a foam sheet. The correlation between cell morphological structures and mechanical and physical properties was evaluated. It was found that PBAT with foam structures effectively reduced the density and thermal conductivity, allowing them to be suitable for applications such as insulation and lightweight packaging or cushion materials.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.695-702
• /
• 2005

It is known that latex-modified concretes were increased their durability and permeability by added latex. The purpose of this study was to analysis the air void systems in latex-modified concretes using a reasonable and objective image analysis method with main experimental variables such as water-cement ratios, latex contents(0%, 15%) and cement types(ordinary portland cement, high-early strength cement and very-early strength cement). The results are analyzed spacing factor, air volume after hardened, air distribution and structure. Also, air void systems and permeability of latex-modified concretes were compared with correlation. The results are as follows; The same w/c ratio LMC showed better air entraining effect than OPC with AE water reducer. The VES-LMC showed that the number of entrained air below $100{\mu}m$ increased more than four times. In the HES-LMC, micro entraining air having range from 50 to $500{\mu}m$ increased above 7 times without antifoamer. Though spacing factor was measured low, latex-modified concretes were showed that permeability was good. It is considered that air void system does not have an effect on the property of latex-modified concretes but latex film is more influenced in the their durability.

• Natural Product Sciences
• /
• v.15 no.3
• /
• pp.144-150
• /
• 2009

Gradient centrifugal partition chromatography (GCPC) method was developed and applied to isolate 3,5-dimethoxyphenanthrene-2,7-diol (DMP) and batatasin-I (BA-I) from the dichloromethane soluble extract of Dioscorea opposita. In this method, the lower phase of n-hexane-methanol-water system (HMW, 10 : 9 : 1, v/v) was used as a mobile phase A (MpA) and water was used as a mobile phase B (MpB). This gradient CPC method is comparable to that of reversed-phase HPLC method in that the stationary upper-phase of HMW (10 : 9 : 1 v/v) works as if it were reversed-phase silica gel due to its hydrophobic property, while the lower phase (MpA) and water (MpB) functioned as hydrophilic mobile phases. The initial condition of the mobile phase was 20% MpA/80% MpB and maintained for 150 min to obtain DMP (1.2 mg), and then MpA was increased up to 50% to elute BA-I (1.7 mg). The purities of DMP and BA-I were 94.1% and 98.3% with the recovery yields of 83% and 86%, respectively. Similar results were obtained by linear-gradient CPC. The CPC peak fractions were identified by comparing their retention time to those of authentic samples of DMP and BA-I and their spectroscopic data ($^1$H NMR and $^{13}$C NMR) to those of literature values.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.155-159
• /
• 2009

Physicochemical properties of sponge cakes prepared using various amounts of rosemary powder were evaluated. Rosemary powder was used at 0, 0.1, 0.3, 0.5, and 0.7%(w/w). The second-stage specific densities of batter increased from 0.49 to 0.54 as the amount of rosemary powder rose from 0% to 0.7%(w/w). All specific densities were within the normal range. The pH of sponge cake batters increased as rosemary powder proportion rose, with statistical significance(p<0.05). The moisture contents of cake showed no difference on the first day but significantly decreased to 38.5-39.7% after 3 days. The acid values and peroxide values fell as the proportion of rosemary powder increased. With rising rosemary powder level, antioxidative capacity increased but physiological properties were not affected in the range of rosemary powder concentrations used in this study.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.98-104
• /
• 2013

$VO_2$ is an attractive thermochromic material, in which its electrical and optical properties can be switched by the structural phase-transition about $68^{\circ}C$. Recently, graphene is also a rising material which is researched as a transparent electrode because of its superior electrical and optical characteristics. In this respect, we try to fabricate the hybridized films using $VO_2$ and graphene on transparent sapphire substrate and then we investigate a structure and characterize an optical property for the samples as a function of temperature. According to the result of IR-transmittance analysis of $VO_2$ films as a function of temperature, the graphene-supported sapphire substrates are better about 10% than the bare sapphire substrates. The mean phase transition temperatures are also decreased as the number of graphene-layers increased and the hysteresis of phase transitions are narrowed.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.22-27
• /
• 2006

Thermal treatment and ozone oxidation methods were examined to reuse waste activated sludge (WAS) produced from a livestock wastewater treatment plant. Analysis of WAS property was made to study usefulness of the recycled waste as fertilizer. From the results of quantitative analysis, WAS particles were found to be composed of 44.25 wt% carbon, 8.43 wt% nitrogen, and 1.35 wt% phosphorus. It was confirmed that the inactivation of pathogenic microorganism was required from the quantitative analysis of microbes. From the results of TSS, COD, SCOD, and pathogenic microorganism measurement, the optimal operating conditions of thermal treatment and ozone oxidation were determined to be 70, 10 min and $0.6L\;O_3/L\;solution{\cdot}min$, 60 min, respectively. The optimized thermal treatment and ozone oxidation represented the efficient pathogen inactivation and particle dissolution, respectively. However, the two methods examined were not themselves sufficient but they need to combine with another treatment for the effective reuse of wastes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.144-158
• /
• 2014

This research presented a conceptual design of damage assessment inventory for efficient response to natural disaster damage of infrastructure close to the river. It consists of classification and categorization of facilities for accomplishing the conceptual design of inventory for damage of infrastructure close to the river. However, there are arising problems of efficient management on disaster, such as poor management of data facilities and constructions which is managed by the different types of government departments. Therefore, this research presented conceptual models of damage assessment inventory on risks of damage infrastructure close to the river using the United states' HAZUS-MH to analyze damage facilities, type of asset classification, classification of domestic facilities and guidelines for computing the value of assets. Conceptual models of inventory this research presented is to be used on the data for damage response on protected inland damage assessment and to increase efficiency for evaluating detailed damage amount of private property by natural disaster and to establish a restoration plan.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.18-25
• /
• 2008

The membrane electrode assembly(MEA) was prepared by a nonequilibrium impregnation- reduction (I-R) method. Nafion 117 and covalently cross-linked sulfonated polyetherether with tungsto- phosphoric acid (CL-SPEEK/TPA30) prepared by our laboratory, were chosen as polymer electrolyte membrane(PEM). $Pt(NH_3)_4Cl_2$, $RuCl_3$ and reducing agent $(NaBH_4)$ were used as electrocatalytic materials. Electrochemical activity surface area(ESA) and specific surface area(SSA) of Pt cathodic electrode with Nafion 117 were $22.48m^2/g$ and $23.50m^2/g$ respectively under the condition of 0.8 M $NaBH_4$. But Pt electrode prepared by CL-SPEEK/TPA30 membrane exhibited higher ESA $23.46m^2/g$ than that of Nafion 117. In case of Pt-Ru anodic electrode, the higher concentration of Ru was, the lower potential of oxygen reduction and region of hydrogen desorption was, and Pt-Ru electrode using 10 mM $RuCl_3$ showed best properties of SSA $34.09m^2/g$ with Nafion 117. In water electrolysis performance, the cell voltage of Pt/PEM/Pt-Ru MEA with Nafion 117 showed cell property of 1.75 V at $1A/cm^2$ and $80{\circ}C$. On the same condition, the cell voltage with CL-SPEEK/TPA30 was the best of 1.73 V at $1A/cm^2$.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.407-412
• /
• 2015

This study investigated flexural properties of indirect Gum-shade composite resins for esthetic improvement. The material utilized in this study was Crea.lign, Twiny flow and Twiny paste (TP). Ten specimens were fabricated with a dimension of $25{\times}2{\times}2mm$ according to the ISO 4049. After fabrications, specimens were stored in the distilled water for 24 hours at the temperature of $37^{\circ}C$. Three-point bending test was performed in universal testing machine (Instron 3344; Instron, USA) at a crosshead speed of 1 mm/min until the failure occurred. TP exhibited a higher flexural strength (FS) and flexural modulus (FM) compared to the flowable materials. There were significant differences among the three materials in FS and FM. However, there was no significant difference in work of fracture (WOF) in all tested materials (p>0.05). In Weibull analysis, TP showed the greatest Weibull modulus which means a higher reliability of the materials. Also, Gum-shade composite resins revealed a strong correlation in all flexural properties. There was a positive correlation in FS-FM ($r^2=0.99$) and a negative correlation between FS-WOF and FM-WOF ($r^2>0.97$). Therefore, this confirmed that flexural property was important for mechanical behavior evaluation and useful information. To addition, this improved among mechanical properties correlation of materials as important factor.

• Parasites, Hosts and Diseases
• /
• v.48 no.4
• /
• pp.319-324
• /
• 2010

A family of calcium-dependent protein kinases (CDPKs) is a unique enzyme which plays crucial roles in intracellular calcium signaling in plants, algae, and protozoa. CDPKs of malaria parasites are known to be key regulators for stage-specific cellular responses to calcium, a widespread secondary messenger that controls the progression of the parasite. In our study, we identified a gene encoding Plasmodium vivax CDPK4 (PvCDPK4) and characterized its molecular property and cellular localization. PvCDPK4 was a typical CDPK which had well-conserved N-terminal kinase domain and C-terminal calmodulin-like structure with 4-EF hand motifs for calcium-binding. The recombinant protein of EF hand domain of PvCDPK4 was expressed in Echerichia coli and a 34 kDa product was obtained. Immunofluorescence assay by confocal laser microscopy revealed that the protein was expressed at the mature schizont of P. vivax. The expression of PvCDPK4-EF in schizont suggests that it may participate in the proliferation or egress process in the life cycle of this parasite.