• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.203-212
• /
• 2005

Cellulose insulation is primarily manufactured from recycled newsprint and treated with fire retardants for the fire resistance. Thanks to the fire retardants, it is not combustible and flammable. In addition to that, Its thermal resistance is much better than that of fiberglass or rock wool. It is made from waste paper and easily decayed when it is demolished, and it has small embodied energy. So it is very environment-friendly building material. For broader use of cellulose insulation in buildings in Korea, it is necessary to test its physical performance to compare the results with the requirements on the Korean Building Code. To this end, apparent thermal conductivity (ka) measurements of Korean-made loose-fill cellulose insulations were recently completed using equipment that was built and operated in accordance with ASTM C 518 and the fire resistance was tested in accordance with ASTM C 1485. Korean loose-fill cellulose has thermal conductivity about 5% greater than the corresponding U.S. product at the same density. This is likely due to differences in the recycled material being used. Both spray-applied and loose-fill cellulose insulation lose about 1.5% of their thermal resistivity for $5.5^{\circ}C$ increase in temperature. The fire resistance of cellulose insulation is increased in linear proportion to the increase of the rate of fire retardant. Thanks to the high fire resistance, cellulose insulation can be used as a substitution of Styrofoam or Urethane foam which is combustible. The thermal conductivity of cellulose insulation was $0.037-0.043W/m{\cdot}K$ at the mean specimen temperature from $4-43^{\circ}C$. It corresponds to the thermal resistance of "Na Grade" according to the Korean Building Code. The effect of chemical content on thermal conductivity was negligible for all but the chemical-free specimen which had the highest value for the thermal conductivity over the temperature range tested. The thermal resistance of cellulose insulation is better than that of fiberglass or rock wool, and its fire resistance is higher than that of Styrofoam or Urethane foam. Therefore it can be substituted for those above considering its physical performance. Cellulose insulation is no more expensive than Styrofoam or rock wool, so it is recommended to use it more widely in Korea.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1293-1301
• /
• 2018

The basic magnetic properties of commercially available High-$T_c$ Superconductor (HTS) GdBCO-coated conductor (GdBCO-CCs) were investigated by using physical property measurement system-vibrating sample magnetometer (PPMS-VSM). From the zero-field-cooled (ZFC) m(T) curve, the $T_c$ was found to be ~93 K. After removing the background m(H) data, we obtained both the net m(H) data and the ${\Delta}m_{irr}$. The $H_{irr}(T)$ coincided very well with the power-law relation $H_{irr}=H_{irr}(0)(1-T/T_c)^n$ with $$n{\sim_=}1.19$$. The magnetic flux behavior was investigated by using the ${\delta}$ values in the relationship $J_c{\propto}{\Delta}m_{irr}{\propto}H^{-{\delta}}$. A ${\delta}{\approx}0$ region denoting an independent magnetic flux pinning effect, a ${\delta}{\approx}0.6{\sim}1.2$ region representing a collective flux pinning effect due to the interaction, and a ${\delta}{\gg}2$ region representing freely moving magnetic fluxes caused by the Lorentz force were observed. The boundary line between ${\delta}{\approx}0$ and ${\delta}{\approx}0.6{\sim}1.2$ is denoted by a $H_1$, and the one between ${\delta}{\approx}0.6{\sim}1.2$ and ${\delta}{\gg}2$ is denoted by a $H_2$. The ${\delta}(T)$ was obtained in the region of $H_1$ < H < $H_2$. As the temperature was decreased, the ${\delta}$ value gradually decreased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.5
• /
• pp.401-408
• /
• 1985

In order to develop new types of product which can offer a sanitary and preservative duality, and convenience to consumers in marketing and cooking particularly in urban area, two processing methods of ready-to-cook food materials with dark fleshed fishes like sardine and mackerel were investigated. A method applied, in this work, is processing of ready-to-cook sardine meat "surimi" in which sardine meat is treated with alkaline solution to stabilize myofibrillar proteins, washed thoroughly with water to remove soluble components, and added with a proper amount of polyphosphate and sorbitol to enforce the functional property of meat such as water holding capasity, elasticity, and gel strength. The textural properties of fish meat paste made from the "surimi" meat were greatly dependent upon the stability of myofibrillar proteins and the elimination of water soluble components. The salt soluble proteins of sardine meat were so unstable in post-mortem stage that the gel forming ability was lost within 3 days at $5^{\circ}C$ storage and 2 to 3 weeks even at $-20^{\circ}C$ although the freshness was well kept for a week at $5^{\circ}C$ and several months of storage at $-20^{\circ}C$. A proper way of treatment to keep the proteins stable was that fish meat must be washed with $0.4\%$ sodium bicarbonate solution followed by 3 to 4 times washing with water. This resulted in removal of $80\%$ water soluble proteins and 50 to $60\%$ lipids. The addition of polyphosphate and sorbitol affected the stability of proteins during the storage of "surimi" meat. When phosphate and sorbitol were added in the ratio of $0.3\%:\;0.3\%,\;0.6\%:\;3\%,\;0.6\%:\;6\%,\;0:\,0.3\%\;and\;0.3\%:\;0$, the gel forming ability terminated in 35 days, 21 days, 14 days, 14 days, and 14 days of storage at $-30^{\circ}C$, respectively, while that of the control was 7 days. And it was also noteworthy that at least 8.0 mg/g of salt soluble protein nitrogen content was required for gel formation.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.806-813
• /
• 2013

Agrimonia pilosa Ledeb. is a medicinal plant with anti-tumor, anti-oxidant, anti-inflammatory and anti-hyperglycemic activities. However, few studies of the anti-diabetic effect of A. pilosa on insulin resistance status have been performed. In the present study, the anti-diabetic effect of A. pilosa water extract (AP) was determined by investigating its ${\alpha}$-glucosidase inhibitory property, glucose utilization, and uptake, as well as insulin resistance mechanism of action in C2C12 skeletal muscle cells. Compared to positive control (acarbose), AP ($10mg/m{\ell}$) showed a similar ${\alpha}$-glucosidase inhibitory capacity. Glucose uptake was significantly increased by $1{\mu}m$ insulin treatment (p<0.05). However, palmitic acid (FFA, 1 mM) induced muscle insulin resistance and glucose uptake dysfunction. On the other hand, AP ($10{\mu}g/m{\ell}$) was capable of reversing the FFA-induced insulin resistance in C2C12 myotubes. Compared to control, AP ($100{\mu}g/m{\ell}$ without insulin) significantly increased the utilization of glucose (p<0.05) in C2Cl2 myotubes cultured in normal glucose (7 mM). AP treatment significantly increased the relative mRNA and protein expression levels of Akt. In particular, the effect of A. pilosa on the insulin signaling system is associated with the up-regulation of Akt genes and glucose uptake in C2Cl2 myotubes. These results suggest that A. pilosa is useful in the prevention of diabetes and the treatment of hyperglycemic disorders.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.583-595
• /
• 2006

Quartz veins from the Hwawon area are an epithermal quartz vein that is filling the fault zone within Precambrian metasedimentary rocks and Jurassic granite. Mineralization can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals(propylitic and argillic zones) such as epidote, chlorite, illite, sericite and sulfides such as pyrite, sphalerite, chalcopyrite, galena, bornite, cubanite, argentian tetrahedrite, Pb-Ag-S system and Pb-Te-S system. Supergene stage is composed of Fe-Mn oxide, Zn-Fe oxide and Pb oxide. Fluid inclusion data indicate that homogenization temperatures and salinity of hypogene stage range from $291.2^{\circ}C$ to $397.3^{\circ}C$ and from 0.0 to 9.3 wt.% eq. NaCl, respectively. It suggests that ore forming fluids were cooled and diluted with the mixing of meteoric water. Oxygen($-0.7{\sim}3.5%_{\circ}$(white quartz: $-0.7{\sim}3.5%_{\circ}$, transparent quartz: $2.4%_{\circ}$)) and hydrogen($-70{\sim}55%_{\circ}$(white quartz: $-70{\sim}55%_{\circ}$, transparent quartz: $-62%_{\circ}$)) isotopic composition indicates that hydrothermal fluids were derived from magmatic and evolved by mixing with meteoric water during mineralization.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.544-553
• /
• 2018

This study was conducted to determine the effects of breed and sex on meat quality and sensory properties of the loin in three-way crossbred pigs: $Landrace{\times}Yorkshire{\times}Duroc$ (LYD) and $Landrace{\times}Yorkshire{\times}Woori$ (LYW) black pig synthesized by Korean native breed. Carcass traits did not differ by breed. Carcass weight and backfat thickness were higher in castrates than in gilts (p<0.01). LYW showed significant high values in fat content, cooking loss, and water-holding capacity (WHC) than LYD (p<0.05). Redness and yellowness of the meat were higher in LYW than in LYD (p<0.01). Further, LYW had lower pH and shear force than LYD (p<0.001). Significant high scores in color and flavor were obtained in LYW or gilts compared to LYD or castrates by sensory panel, respectively (p<0.05). However, other sensory traits did not differ by breed or sex. Capric acid (C10:0) was higher in LYD than LYW (p<0.001). However, stearic acid (C18:0) and saturated fatty acid (SFA) contents were higher in LYW than LYD (p<0.05). Eicosenoic acid (C20:2) and the n6/n3 ratio were higher in gilts than in castrates, whereas SFA content was higher in castrates than in gilts. These results suggest that certain physicochemical qualities of meat and sensory properties are improved in LYW compared to LYD. This study could provide basic data on meat quality of crossbred pigs with Woori black pig as a terminal sire.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.737-744
• /
• 1997

Four-dimensional response surface methodology was used for optimizing preparation conditions and monitoring sensory quality of instant rice gruel prepared using oyster mushroom and brown rice. Water absorption time of brown rice and glutinous rice to prepare instant rice gruel were 50 hr at $5^{\circ}C\;and\;1\;hr\;at\;20^{\circ}C$, respectively. The optimum conditions predicted for each corresponding sensory properties of instant rice gruel were 47.58% (rate of brown rice in water-absorbed brown and glutinous rice), 569.68 mL (content of solution) and 52.40 min (heating time at $120^{\circ}C$) in viscosity of instant rice gruel, 47.15%, 568.49 mL and 53.04 min in taste of instant rice gruel, 44.06%, 558.54 mL and 53.84 min in mouth-feel of instant rice gruel, and 46.20%, 561.64 mL and 51.60 min in overall acceptance of instant rice gruel, respectively. The optimum conditions, which satisfy all sensory properties of rice gruel, were 44%, 620 mL and 56 min in rate of brown rice in water-absorbed brown and glutinous rice, content of solution and heating time, respectively. Sensory scores predicted at the optimum conditions were in good agreement with experimental sensory scores.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.796-803
• /
• 2013

Property changes and bacterial characterizations by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) were investigated during the fermentation of Makgeollies by 5 isolated yeast strains. Changes of pH were large between day 0 (pH 6) and day 2 (pH 3) and showed less variation after then. ANOVA analyses revealed that pHs were statistically different with fermentation times (p<0.001), while strains (p=0.60) did not. Acidities were changed from 0.19 to 1.04% and showed rather high increase from day 2, and fermentation times (p<0.001) and strains (p=0.006) represented statistical differences. All strains showed less than 0.150% at amino-type nitrogen contents except S strain showed 0.442% at day 8, and there were no statistical differences with fermentation times (p=0.4558) and strains (p=0.3513). Saccharinities of C strain were higher from day 4, and fermentation times (p<0.0001) and strains (p=0.007) showed statistical differences. Large variation of alcohol concentrations (%) were observed between day 0 (0%) and day 2 (10%) and showed less variation after day 2, and there was no statistical difference with strains. Dominant prokaryotes were Lactobacillus fermentum and Pediococcus pentosaceus, which producing acids and functional materials. Dominant eukaryote was Saccharomyces cerevisiae, which might be resulted from addition of yeasts.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.35-42
• /
• 2017

Previously, we reported LVH peptiede derived from Aurelia aurita as cosmecetuticals with anti-winkle activity. In this study, we synthesized pal-LVH using palmitic acid to enhance skin permeability of LVH and examined the effects as cosmeceuticals of pal-LVH. To evaluate these effects, we performed cell toxicity, wound healing, and patch test for skin irritation with LVH and pal-LVH and compared these results for their effects. As a result. pal-LVH was not showed in cytotoxicity and allergenic effect like as LVH. Besides, pal-LVH had almost same excellent anti-ageing properties in high concentration and anti-winkle effect in low concentrationwas as LVH. These results suggested synthesis of palimitic acid and LVH did not affect any functions as cosmeceuticals with increasing skin permeability. Therefore, pal-LVH can be adaptable as new cosmecetuticals with anti-winkle and anti-ageing materials and applied in the development of medicine through various convergence study.