• Membrane Journal
• /
• v.31 no.6
• /
• pp.434-442
• /
• 2021

Poly(vinylidene fluoride) (PVDF) membrane has a good membrane durability because of its high mechanical resistance, thermal and chemical stability. However, the strong hydrophobic property of PVDF membrane can induce a low water permeability and easy fouling by proteins and organic matters. In order to improve the anti-fouling properties of PVDF membrane, the PVDF mixed matrix asymmetric membranes impregnated with biofunctional material 𝛽-cyclodextrin (𝛽-CD) in the membrane structure were prepared by phase inversion method. The membrane filtration experiments of pure water and BSA solution were performed using the PVDF/𝛽-CD mixed matrix asymmetric membranes prepared according to the 𝛽-CD contents. The experiments showed that the introduction of 𝛽-CD into the PVDF polymer matrix contributed to increase in the hydrophilic property of the PVDF membranes, and this led to the reduction of contact angles and improvement of anti-fouling properties. The PVDF/𝛽-CD membrane which was prepared using the dope solution with a 2 wt% 𝛽-CD content represented 64 L/m²·h of pure water flux, 95% of BSA rejection and maximum 80% of flux enhancements compared to flux results of the pristine PVDF membrane.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.111-122
• /
• 2013

Sodium sulfur (NAS) battery is a high energy storage system (ESS). These days, as the use of renewable green energy like wind energy, solar energy and ocean energy is rapidly increasing, the demand of ESS is increasing and NAS battery is considered to be one of the most promising ESS. Since NAS battery has a high energy density(3 times of lead acid battery), long cycle life and no self-charge and discharge, it is a good candidate for ESS. A NAS battery consists of sulfur as the positive electrode, sodium as the negative electrode and ${\beta}$"-alumina as the electrolyte and a separator simultaneously. Since sulfur is an insulator, carbon felt should be used as conductor with sulfur and so the composition and property of the cathode could largely influence the cell performance and life cycle. Therefore, in this paper, the composition of NAS battery, the property of carbon felt and sodium polysulfides ($Na_2S_x$, intermediates of discharge), and the effects of these factors on cycle performance of cells are described in detail.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.188-192
• /
• 2013

Many studies have been conducted for preventing from diffusion between silicon wafer and metallic thin film due to a decrease of line-width and multi-layer thin film for miniaturization and high integration of semiconductor. This paper has focused on the nano-mechanical property of diffusion barrier which sample is prepared for various gas flow rate of nitrogen with tungsten (W) base from 2.5 to 10 sccm. The deposition rate, resistivity and crystallographic properties were measured by a ${\beta}$-ray back-scattering spectroscopy, 4-point probe and x-ray diffraction (XRD), respectively. We also has investigated the nano-mechanical property using the nano-indenter. As a result, the surface hardness of W-N thin film was increased rapidly from 10.07 to 15.55 GPa when the nitrogen gas flow was increased from 2.5 to 5 sccm. And the surface hardness of W-N thin film had 12.65 and 12.77 GPa at the nitrogen gas flow of 7.5 and 10 sccm respectively. These results were decreased by the comparison with the W-N thin film at nitrogen gas flow of 5 sccm. It was inferred that these severe changes were caused by the stoichiometric difference between the crystalline and amorphous state in W-N thin film. In addition, these results were caused by increased compressive stress.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.310-316
• /
• 2020

Terpene-modified phenolic resins were used to improve the tires wet traction related to the driving safety and also rolling resistance related to fuel efficiency. In this work, alpha-pinene, beta pinene, and delta limonene resins, which constitute different basic structures of terpene-modified phenolic resins, were individually added to the tread compounds of tires and their physical properties were compared with those of the alkyl phenol resin compounds. Alkyl phenolic resins showed no significant difference in tangent delta from terpene-modified phenolic resins at 0 ℃, which is related to wet traction, but showed higher tangent delta at 80 ℃, which is related to rolling resistance, indicating smaller fuel efficiency improvement effects. Among the terpene-modified phenolic resins, beta pinene one showed improved wet traction and fuel efficiency compared to those of other resins. Delta limonene resin showed the best wet traction improvement effect, and alkyl phenolic resins showed relatively high tensile strength and abrasion property. All terpene-modified resins exhibited better rolling resistance than those of alkyl phenolic ones so that they can be said to have better fuel efficiency improvement effects and also to improve other properties compared to those of blanks. Terpene-modified phenolic resins could be used when mixing tire compounds referring to the properties of the phenolic resins revealed in this work, which could result in preparing compounds with improved wet traction and rolling resistance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.549-556
• /
• 2005

Response surface methodology (RSM) was applied in steaming and roasting processes of Polygonatum odoratum roots in order to monitor hypoglycemic components and sensory property. In steaming and roasting processes based on the central composite design with variations in steaming time $(60\~180\;min)$, roasting temperature $(110\~150^{\circ}C)$ and roasting time $(10\~50\;min)$, coefficients of determinations $(R^2)$ were 0.8691 (p<0.05), 0.8253 (p<0.l0), 0.8727 (p<0.05), 0.8706 (p<0.05) and 0.8316 (p<0.10) in soluble solid, stigmasterol, $\beta-sitosterol$, hypoglycemic component (total), and overall acceptability, respectively. The maximum value of soluble solid was $71.47\%$ in 65.24 min of steaming time, $126.93^{\circ}C$ of roasting temperature and 37.58 min of roasting time. The maximum value of hypoglycemic component (total) was $764.10\;{\mu}g/g$ in 107.76 min, $117.78^{\circ}C$ and 14.70 min. Meantime, the maximum value of overall acceptability was 6.89 in 126.04 min, $115.79^{\circ}C$ and 43.93 min. The predicted values in optimum conditions for hypoglycemic components and sensory property were in good agreement with experimental values.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.217-222
• /
• 2009

The objective of this study was to obtain basic data on Korean traditional meju collected in 17 regions of Korea, to define and control meju quality. The moisture, crude fat, crude protein, and amino nitrogen contents of meju were 9.83-36.24%(w/w), 17.46-28.74%(w/w), 42.00-45.54%(w/w), and 223.65-1137.68 mg%, respectively. Meju was the enzyme source which made the soy sauce and doenjang. The $\alpha$-amylase, $\beta$-amylase, and protease levels were 130.32-1254.45, 30.07-167.88 and 72.53-340.04 units, respectively. Regional enzyme activities differed widely. Bacterial levels were $4.8{\times}10^7-2.6{\times}10^{10}cfu/g$, and molds and yeasts were at $4.3{\times}10^4-7.9{\times}10^6cfu/g$.

• Journal of the Korean Ceramic Society
• /
• v.13 no.1
• /
• pp.30-34
• /
• 1976

In general the chemical composition of glass ceramics in Li2O-Al2O3-SiO2 system is similar to the composition of $\beta$-spodumene (Li2O-Al2O3-4SiO2). With the object to manufacture the glass ceramics which can be produced in the domestic pot the composition of glass was so settled at 1.0 Li2O.0.9Al2O3.6.0SiO2 in order to reduce the contents of Li2O, to prevent the corrosion of the pot and to decrease the cost of raw materials. 0.2 mole and 0.1 mole of the mixture of TiO2 and ZrO2 as nucleants were added to the basic composition of 1.0 Li2O-0.9Al2O3-6.0SiO2. Each sample was divided into two kinds with a TiO2/ZrO2 ratio of 2 to 1 and the other with a TiO2/ZrO2 ratio fo 1 to 1. Thermal expansion coefficient, the most important property of glass ceramics, was tested. The softening point and the melting point of the samples were observed by the use of a heating microscope. The results obtained were as follows. The manufacturing of glass ceramics seems to be possible in the industrial plant using the domestic pot. 1) The composition of the glass which can be melted in the domestic pot process was near 1.0 Li2O.0.9Al2O3.6.0SiO2. 2) The temperature range of crystal creation and crystal growth was between 850-94$0^{\circ}C$, and 5 hours holding the samples at the temperature range was enough to crystallize them. The major crystal was $\beta$-spdumene and there existed petalite partialy. 3) The thermal expansion coefficient fo the crystallized glass was negative. 4) The deforming point of the crystallized glass was 1435$^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.31-36
• /
• 1989

The second-order rate constants for the nucleophilic substitution reactions of para-substituted benzyl nitrates with para-substituted anilines in acetonitrile were conductometrically determined. Hammett ${\rho}$x and ${\rho}$y values and Bronsted ${\beta}$ values were obtained from these kinetic data. The reactions of Benzyl nitrates with the series of anilines showed linear Hammett plots with negative slopes. For the change of substituents in the benzyl nitrates, nonlinear Hammett plots with a concave upwards curve were obtained. We applied the potential energy surface and the quantum mechanical models in order to examine the transition state variations caused by changes in substituents on the nucleophile and the substrate. The results showed that the reaction was proceeded via the $S_{N}2$-type reaction mechanism in which the extent of bond-formation was greatly changed depending on the property of the substituents in substrate.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.170-176
• /
• 2014

Effective glass frit compositions enabled to absorb laser energy, and to seal a commercial dye-sensitized solar-cell-panel substrate were developed by using $V_2O_5$-based glasses with various amounts of $TeO_2$ substitution. The latter was intended to increase the lifetime of the solar cells. Substitution of $V_2O_5$ by $TeO_2$ provided a strong network structure for the glasses via the formation of tetrahedral pyramids in the glass, and changed the various glass properties, such as glass transition temperature ($T_g$), dilatometric softening point ($T_d$), crystallization temperature, coefficient of thermal expansion (CTE), and glass flowage without any detrimental effect on the laser absorption property of the glasses. The thermal expansion mismatch (${\Delta}{\alpha}$) between the glass frit and the substrate could be controlled within less than ${\pm}5%$ by addition of 10 wt% of ${\beta}$-eucryptite. An 810 nm diode laser was used for the sealing test. The laser sealing test revealed that the VZBT20 glass frit with 10 wt% ${\beta}$-eucryptite was successfully sealed the substrates without interfacial cracks and pores. The optimum sealing conditions were provided by a beam size of 3 mm, laser power of 40 watt, scan speed of 300 mm/s, and 200 irradiation cycles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3028-3035
• /
• 2010

This paper propose a genetic method based on probability map to detect region of the lips on a natural image with the faces. The method has many solutions in order to detect regions such as the lips instead of one optimal solution of existing methods. To do this, it represents a pair of spatial coordinates as a chromosome, and introduces genetic operations like conservation interval, the number of generations and non-overlapping selection. By using the probability map of the HS in HSV color space, it increases adaptability to similar color that is a property of genetic algorithm. In our experiments, the optimal value of the important parameter $\beta$ was analyzed, which was used as the condition of an ending function and affected performance of the proposed algorithm. Also the algorithm was analyzed on what performance it has when its mating methods are different. The results of the experiment showed that our algorithm could be flexibly adapted for detecting other ROIs.