• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.301-307
• /
• 2012

SiAlON glasses are silicates or alumino-silicates, containing Mg, Ca, Y or rare earth (RE) ions as modifiers, in which nitrogen atoms substitute for oxygen atoms in the glass network. These glasses are found as intergranular films and at triple point junctions in silicon nitride ceramics and these grain boundary phases affect their fracture behaviour. This paper provides an overview of the preparation of M-SiAlON glasses and outlines the effects of composition on properties. As nitrogen substitutes for oxygen in SiAlON glasses, increases are observed in glass transition temperatures, viscosities, elastic moduli and microhardness. These property changes are compared with known effects of grain boundary glass chemistry in silicon nitride ceramics. Oxide sintering additives provide conditions for liquid phase sintering, reacting with surface silica on the $Si_3N_4$ particles and some of the nitride to form SiAlON liquid phases which on cooling remain as intergranular glasses. Thermal expansion mismatch between the grain boundary glass and the silicon nitride causes residual stresses in the material which can be determined from bulk SiAlON glass properties. The tensile residual stresses in the glass phase increase with increasing Y:Al ratio and this correlates with increasing fracture toughness as a result of easier debonding at the glass/${\beta}-Si_3N_4$ interface.

• Communications of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.1341-1356
• /
• 2018

The author devotes this paper to defining a new class of generalized soft open sets, namely soft somewhere dense sets and to investigating its main features. With the help of examples, we illustrate the relationships between soft somewhere dense sets and some celebrated generalizations of soft open sets, and point out that the soft somewhere dense subsets of a soft hyperconnected space coincide with the non-null soft ${\beta}$-open sets. Also, we give an equivalent condition for the soft csdense sets and verify that every soft set is soft somewhere dense or soft cs-dense. We show that a collection of all soft somewhere dense subsets of a strongly soft hyperconnected space forms a soft filter on the universe set, and this collection with a non-null soft set form a soft topology on the universe set as well. Moreover, we derive some important results such as the property of being a soft somewhere dense set is a soft topological property and the finite product of soft somewhere dense sets is soft somewhere dense. In the end, we point out that the number of soft somewhere dense subsets of infinite soft topological space is infinite, and we present some results which associate soft somewhere dense sets with some soft topological concepts such as soft compact spaces and soft subspaces.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.547-552
• /
• 2019

In the present study, the thermal conductivity of a silicon nitride($Si_3N_4$) thin-film is evaluated using the dual-wavelength pump-probe technique. A 100-nm thick $Si_3N_4$ film is deposited on a silicon (100) wafer using the radio frequency plasma enhanced chemical vapor deposition technique and film structural characteristics are observed using the X-ray reflectivity technique. The film's thermal conductivity is measured using a pump-probe setup powered by a femtosecond laser system of which pump-beam wavelength is frequency-doubled using a beta barium borate crystal. A multilayer transient heat conduction equation is numerically solved to quantify the film property. A finite difference method based on the Crank-Nicolson scheme is employed for the computation so that the experimental data can be curve-fitted. Results show that the thermal conductivity value of the film is lower than that of its bulk status by an order of magnitude. This investigation offers an effective way to evaluate thermophysical properties of nanoscale ceramic and dielectric materials with high temporal and spatial resolutions.

• Textile Coloration and Finishing
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2011

Research information related to application of enzyme as pretreatment and subsequent functional finishing on wool blended textiles for imparting multi-functional properties is still scanty. Yarn-blended wool/cotton fabric was pretreated with both a cellulase (Bactosol-CA) or a protease (Savinase-16.0LEx) in individual, subsequently finished with Synthappret-BAP and ${\beta}$-cyclodextrin based combination to impart anti-shrink, anti-microbial, softening and anti-crease properties. The performance of the finished fabrics depended on type of finishing combinations applied rather than enzyme pretreatment. Savinase pretreatment followed by Synthappret+Ceraperm-MW combination finishing impart both anti-shrink property as well as softening, while Bactosol pretreatment followed by ${\beta}$-cyclodextrin and sanitize combination finishing impart antimicrobial activity as well as anti-shrink finish to the wool/cotton blend fabric.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.900-903
• /
• 2009

An oat gum was extracted from whole seeds of a drought harvested oat (Avena sativa). Oat gum presented a ${\beta}-glucan$ content of 65%(w/w) and an intrinsic viscosity of 141 mL/g. Gelling capability of oat gum at different concentrations was investigated. Gel hardness increased from 0.08 to 0.25 N as the oat gum concentration changed from 5 to 10%(w/v). Whippability, foam stability, emulsion stability, and reduced viscosity of oat gum at different pH were also investigated. Oat gum whippability was maximum at pH 7 (146%), while the higher foam and emulsion stability values were found at pH 9 (88 and 96%, respectively). The gum reduced viscosity increased from 715 to 958 mL/g as the pH changed from 7 to 9. Oat gum shows great potential as a gel forming, thickening, and stabilizing agent.

• YAKHAK HOEJI
• /
• v.52 no.5
• /
• pp.412-417
• /
• 2008

BAY11-7082 was initially found to be an anti-inflammatory drug with NF-${\kappa}B$ inhibitory property. In this study, we evaluated modulatory function of BAY11-7082 on U937 cell-cell adhesion induced by CD29 (${\beta}1$-integrins). BAY11-7082 strongly blocked functional activation of CD29 (${\beta}1$-integrins), as assessed by cell-cell adhesion assay. However, this compound did not block a simple activation of CD29, as assessed by cell-fibronectin adhesion assay. In particular, to understand molecular mechanism of BAY11-7082-mediated inhibition, the regulatory roles of CD29-induced actin cytoskeleton rearrangement under cell-cell adhesion and surface level of CD29 were examined using confocal and flow cytometic analysis. Interestingly, this compound strongly suppressed the molecular association of actin cytoskeleton with CD29 at cell-cell adhesion site. Moreover, BAY11-7082 also diminished surface levels of CD29 as well as its-associated adhesion molecule CD147, but not other adhesion molecules such as CD18 and CD43. Therefore, our data suggest that BAY11-7082 may be involved in regulating immune responses managed by CD29-mediated cell-cell adhesion.

• Journal of the Korean Society of Radiology
• /
• v.2 no.3
• /
• pp.19-25
• /
• 2008

Commercial analog x-ray detectors based on film cassettes have been showing problems such as with image storage and image transmission. Recently direct conversion material, photoconductor whit flat panel have been researched which generate the electron hole-pair (EHP). In this paper, we researched the electrical properties of the PbO and Lead(II) oxide PbO. film which fabricated by Particle-In-Binder(PIB) method. We compared tetragonal ${\alpha}$-PbO with orthorhombic ${\beta}$-PbO physical property. Tetragonal material was more than orthorhombic material in other paper. The solution was Poly Vinyl Butyral(PVB) in the PIB. We discussed about the sample of x-ray sensitivity, leakage current, Signal to Noise Rate and investigated SEM for the physical property of sample. We need to think more research ${\alpha}$-PbO material fabrication.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.121-124
• /
• 2009

We investigated sericin extracted from sericinjam, which was inbred at National Academy of Agricultural Science, Suwon, Korea. Sericinjam sericin is composed of 5 fractions: 250 kDa, 120 kDa, 90 kDa, 70 kDa and 40 kDa. Amino acid analysis showed that the major amino acids of sericinjam sericin were Ser, Gly, Asp, Glu, Thr and Ala. Infrared spectra showed that sericinjam sericin has $\beta$-sheet structure. Thermal property of sericin was investigated using DSC and then they showed characteristic degradation peak at around $215{\sim}240^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.24 no.4
• /
• pp.201-206
• /
• 2014

TiC-21 mol% Mo solid solution (${\delta}$-phase) and TiC-99 mol% Mo solid solution (${\beta}$-phase), and TiC-(80~90) mol% Mo hypo-eutectic composite were deformed by compression in a temperature range from room to 2300 K and in a strain rate range from $4.9{\times}10^{-5}$ to $6.9{\times}10^{-3}/s$. The deformation behaviors of the composites were analyzed from the strengths of the ${\delta}$- and ${\beta}$-phases. It was found that the high strength of the eutectic composite is due primarily to solution hardening of TiC by Mo, and that the ${\delta}$-phase undergoes an appreciable plastic deformation at and above 1420 K even at 0.2% plastic strain of the composite. The yield strength of the three kinds of phase up to 1420 K is quantitatively explained by the rule of mixture, where internal stresses introduced by plastic deformation are taken into account. Above 1420 K, however, the calculated yield strength was considerably larger than the measured strength. The yield stress of ${\beta}$-phase was much larger than that of pure TiC. A good linear relationship was held between the yield stress and the plastic strain rate in a double-logarithmic plot. The deformation behavior in ${\delta}$-phase was different among the three temperature ranges tested, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurred, and from the beginning the work hardening level was high. At the tested temperature, a good linear relationship was held in the double logarithmic plot of the yield stress against the plastic strain rate. The strain rate dependence of the yield stress was very weak up to 1273 K in the hypo-eutectic composite, but it became stronger as the temperature rose.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.147-153
• /
• 2007

This study sought to investigate the reaction of Co-binder containing tungsten with molten zinc. Four kinds of Co-W alloys (pure, 10%W, 20%W, 30%W) were prepared using the powder metallurgy method. The specimens were immersion-tested in molten pure zinc baths at $460^{\circ}C$. To evaluate the corrosion property in molten zinc, the weight loss of the specimen was measured after the immersion tests at different immersion times (10~300 min.). Co-10%W alloys, compared with pure cobalt, showed no effect of tungsten addition on the reaction rate in molten zinc. The relationship between the weight loss and the square root of immersion period represents a straight line in both pure cobalt and Co-10%W alloy. The Co-Zn reaction layer in Co- 1O%W alloy consists of $\gamma2$, $\gamma1$, $\gamma$ and ($\beta1$ phases. The rate of weight loss significantly increases and the weight loss behavior is not well accord with the linear relationship as the tungsten content in the Co-W alloy increases. The $\beta1$ layer was not formed on the Co-20%W alloy and neither was a stable Co-Zn intermetallic compound layer found on the Co-30%W alloy. The main cause of increase in reaction rate with increasing tungsten content is related with the instability of the Co-Zn reaction phases as seen on micro-structural analysis.