• 제목/요약/키워드: the pass rate

검색결과 585건 처리시간 0.029초

수중 센서 노드를 위한 음파 대역 인터폴레이터 설계 (Design of an Acoustic band Interpolator for Underwater Sensor Nodes)

  • 김선희
    • 디지털산업정보학회논문지
    • /
    • 제16권1호
    • /
    • pp.93-98
    • /
    • 2020
  • Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

Voltage-Mode 1.5 Gbps Interface Circuits for Chip-to-Chip Communication

  • Lee, Kwang-Jin;Kim, Tae-Hyoung;Cho, Uk-Rae;Byun, Hyun-Geun;Kim, Su-Ki
    • ETRI Journal
    • /
    • 제27권1호
    • /
    • pp.81-88
    • /
    • 2005
  • In this paper, interface circuits that are suitable for point-to-point interconnection with an over 1 Gbps data rate per pin are proposed. To achieve a successful data transfer rate of multi-gigabits per-second between two chips with a point-to-point interconnection, the input receiver uses an on-chip parallel terminator of the pass gate style, while the output driver uses the pullup and pulldown transistors of the diode-connected style. In addition, the novel dynamic voltage level converter (DVLC) has solved such problems as the access time increase and valid data window reduction. These schemes were adopted on a 64 Mb DDR SRAM with a 1.5 Gbps data rate per pin and fabricated using a 0.10 ${\mu}m$ dual gate oxide CMOS technology.

  • PDF

A Simple One-pass Variable Rate Control Method for Fixed-Size Storage Systems

  • Kyungheon Noh;Jeong, Seh-Woong;Park, Jeahong;Byeungwoo Jeon
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.289-292
    • /
    • 2002
  • This paper provides a frame-layer method for controlling bit rate of compressed video data in real time. Our approach is easy to operate and can store encoded video data in real time without deteriorating the quality of an image. To provide ameliorated and consistent visual quality, a new concept named SOP (Set Of Pictures) and a new quantization parameter variation control algorithm based on a second-order rate-distortion model 〔2〕 are introduced. The total bit-budget is allocated efficiently to cope with unpredictable recording time by using the proposed algorithm and it is distributed to each frame. In the end, we show improved and consistent video quality with experimental results obtained from C-model of a MPEG-4 (simple-profile) encoder.

  • PDF

하이패스 운용가용도를 이용한 부품의 교체 추정 모델 (An Estimation Model for the Replacement Parts based on the Operational Availability of Hi-Pass System)

  • 황의덕;허서정;김창석;손동철
    • 한국융합학회논문지
    • /
    • 제6권6호
    • /
    • pp.285-291
    • /
    • 2015
  • 현재 FTMS(Freeway Traffic Management System: 고속도로 교통관리 시스템), TCS(Toll Collection System: 요금 징수 시스템), 하이패스(Hi-Pass: 통행료 전자 지불 시스템)등의 고속도로 ITS(Intelligent Transportation System) 설비들은 단순한 이력관리 및 수동적인 사후관리가 이루어져 고장관련 DB가 부족하여 시설물의 통합운영관리 활용을 최대화 하지 못하고 있다. 또한, 부품의 교체시기가 없어 고장 발생 시마다 부품을 교체하다 보니 고장건수 증가 및 수리시간이 증가하며, 매번 교체 할 때마다 서비스가 중단되는 문제 점이 발생한다. 본 연구에서는 고속도로 ITS 시설물의 고장이력을 사전에 관리하여 예방적 유지관리를 하려한다. 따라서 하이패스 시설물의 고장이력을 신뢰성 이론에 기반을 두고 체계적인 통계분석을 통해 시스템의 신뢰도인 운용가용도를 산출한다. 교체시기 산정을 통해 고장건수 및 시간이 감소하며 예비품 수량을 확보하여 예산 비용을 줄일 수 있고, 부품의 관리계획을 수립하여 지속적인 예방적 유지관리를 통해 시스템의 품질을 향상시키고, 서비스 품질을 항시 가용한 상태인 무 중단 운용상태를 지향 할 수 있도록 하는 것이 본 연구의 목적이다.

호흡연동 용적변조 회전방사선치료에서 호흡주기에 따른 선량전달 정확성 검증 (Dose verification for Gated Volumetric Modulated Arc Therapy according to Respiratory period)

  • 전수동;배선명;윤인하;강태영;백금문
    • 대한방사선치료학회지
    • /
    • 제26권1호
    • /
    • pp.137-147
    • /
    • 2014
  • 목 적 : 호흡연동 용적변조 회전방사선치료(Gated Volumetric Modulated Arc Therapy)에서 환자의 호흡주기 변화에 따른 선량전달의 정확성을 검증하고자 한다. 대상 및 방법 : 실험에는 TrueBeam STxTM(Varian Medical Systems, Palo Alto, CA)치료기를 사용하였다. 인체모형등가팬텀(Rando Phantom, Alderson Resarch Laboratories Inc. Stamford. CT, USA)의 전산화단층영상에 전산화치료계획시스템(Eclipse 10.0, Varian, USA)을 이용하여 10 MV FFF(Flatenning Filter Free), 선량률 1200 MU/min으로 1500 cGy/fx(Case1, 2, 3)과 220 cGy/fx(Case4, 5, 6)의 치료계획을 수립하였다. $QUASAR^{TM}$ Respiratory Motion Phantom(Modus Medical Devices Inc)을 이용하여 1.5, 2.5, 3.5, 4.5 sec의 일정한 호흡주기와 평균호흡주기가 2.2, 3.5 sec인 환자의 호흡주기를 재현하였고 위상모드 30~70% 구간에서 방사선이 조사되도록 설정하였다. 각각의 호흡 조건에서 2차원 이온전리함 배열 검출기(I'mRT Matrixx, IBA Dosimetry, Germany)와 MultiCube Phantom(IBA Dosimetry, Germany)을 이용하여 측정하였고 세기변조 방사선치료 분석 프로그램(OmniPro I'mRT, IBA Dosimetry, Germany)을 이용하여 Gamma pass rate(3 mm, 3%)을 비교하였다. 결 과 : Case 1, 2, 3, 4, 5, 6의 Gamma pass rate은 일정한 호흡주기 1.5 sec에서 100.0, 97.6, 98.1, 96.3, 93.0, 94.8%, 2.5 sec에서 98.8, 99.5, 97.5, 99.5, 98.3, 99.6%, 3.5 sec에서 99.6, 96.6, 97.5, 99.2, 97.8, 99.1%, 4.5 sec에서 99.4, 96.3, 97.2, 99.0, 98.0, 99.3%의 결과를 보였다. 환자의 호흡을 재현한 경우 평균 호흡주기 2.2 sec에서는 97.7, 95.4, 96.2, 98.9, 96.2, 98.4%, 3.5 sec에서는 97.3, 97.5, 96.8, 100.0, 99.3 99.8%의 결과를 보였다. 결 론 : 2.5 sec이상의 일정한 호흡주기와 환자의 호흡을 재현한 실험에서 Gamma pass rate 95%이상의 임상적으로 신뢰할 만한 결과를 보였다. 일정한 호흡주기 1.5 sec의 Case 5, 6 에서 93.0, 94.8%의 결과를 보였으나 100명의 환자 호흡주기 분석 결과 1.5 sec의 호흡을 지속했던 경우는 없었던 점으로 보아 대부분의 호흡조건에서 정확한 선량전달이 가능함을 확인 하였다. 다만 극히 짧은 호흡주기로 인한 오차발생 가능성을 배제할 수 없기 때문에 치료전 선량전달 정확성 검증이 선행되어야 하며 모의치료시 환자 교육으로 안정된 호흡을 유지하고 정확한 모니터링을 통해 치료중 환자 호흡변화에 대처한다면 더욱 안정적이고 정확한 치료가 이루어질 것으로 사료된다.

차체 라디에이터그릴의 형상에 따른 공기 유동해석 (Air Flow Analysis due to the Configuration of Car Body Radiator Grill)

  • 조재웅;한문식
    • 한국기계가공학회지
    • /
    • 제12권3호
    • /
    • pp.21-27
    • /
    • 2013
  • This study is investigated on flow analysis according to grill configuration of radiator. The stream of flow which pass through radiator grill in car body and the contour of pressure distribution are estimated by the basis. As the magnitude of resistance force which flow affects the car body is investigated so that the power reduction can be reduced. As the pressure inside radiator grill is assessed, more efficiency can be investigated in order that the flow rate inside car body can be increased. Model 2 has the most air resistance and model 1 has the least among model 1, 2 and 3. Model 1 has the most air flow rate at inside. There are model 3 and 2 simulated according to flow rate. As the curved surface at radiator grill configuration increases in number, air flow rate becomes distributed uniformly. By considering the effect on air resistance and air flow rate at radiator grill, model 3 becomes the most effective configuration.

두 종류의 촉진(브랜드 프로모션과 점포 프로모션)과 유통구성원의 최적결정 (The Promotions of Brands and Stores and their Impact the Optimal Decisions for the Marketing Channel Members)

  • 김상용
    • 한국유통학회지:유통연구
    • /
    • 제3권1호
    • /
    • pp.7-29
    • /
    • 1998
  • Manufacturers want brand promotions at the stores. In contrast, retailers want promotions for the stores rather than for the brands since better store promotions can attract customers from the competing retail stores. In this paper, three scenarios are assumed for the promotions in terms of the allowances or the side-payments form the manufacturer to the retailer and the pass-through rate for the allowances being used for the brand promotions by the retailer. An analytical model for the marketing channel distribution is used for the analysis. Then, several marketing implications are suggested based on the findings.

  • PDF

연삭식 도정기에 의한 도정 정도별 쌀의 이화학적 특성 변화 (Changes of Physicochemical Characteristics of Rice Milled by Newly Designed Abrasive Milling Machine)

  • 김용석;이나영;황철승;유미지;백경화;신동화
    • 한국식품영양과학회지
    • /
    • 제33권1호
    • /
    • pp.152-157
    • /
    • 2004
  • 연삭식 정미기를 이용하여 도정한 쌀의 도정 정도에 따른 수력함량은 12.81∼13.15%로서 연삭 횟수가 증가할수록 약간 증가하는 경향이었으며, 조단백질 및 조지방 함량은 각각 7.81∼8.50% 및 1.07∼l.93%로서 도정 정도가 클수록 감소하였으나 백미보다는 높았고, 조지방의 주요 지방산은 palmitic acid(22.06∼25.76%, peak area %), oleic acid(34.04∼35.62%) 및 linoleic acid(39.58∼42.22%)로 확인되었다. 백도는 현미와 백미의 중간 정도이었으며, 쌀눈 부착률은 연삭 4회 및 연마 1회 시료의 경우에도 39.33%에 이르러 백미(4.00%)보다 매우 높은 비율을 나타냈으며, 천립중은 현미와 유의적 차이(p<0.05)가 없었다. 주사전자현미경 관찰 결과 연삭 4회 및 연마 1회 시료는 표면의 매끄러움이 백미와 비슷한 반면 쌀눈이 일부 부착되어 있었다. 취반 후 관능평가 한 결과 연삭,3회, 연삭 4회, 연삭 4회 및 연마 1회 시료는 백미와 유의적 차이가 없거나(맛) 약간 낮은 선호도(색깔, 냄새, 조직감, 전체적 기호도)를 나타냈으나 현미보다 월등히 높은 선호도를 나타내어 영양가 있는 쌀로서 이용되기에 좋은 것으로 판단된다.

Filtering of Filter-Bank Energies for Robust Speech Recognition

  • Jung, Ho-Young
    • ETRI Journal
    • /
    • 제26권3호
    • /
    • pp.273-276
    • /
    • 2004
  • We propose a novel feature processing technique which can provide a cepstral liftering effect in the log-spectral domain. Cepstral liftering aims at the equalization of variance of cepstral coefficients for the distance-based speech recognizer, and as a result, provides the robustness for additive noise and speaker variability. However, in the popular hidden Markov model based framework, cepstral liftering has no effect in recognition performance. We derive a filtering method in log-spectral domain corresponding to the cepstral liftering. The proposed method performs a high-pass filtering based on the decorrelation of filter-bank energies. We show that in noisy speech recognition, the proposed method reduces the error rate by 52.7% to conventional feature.

  • PDF

청각 구조를 이용한 잡음 음성의 인식 성능 향상 (Performance Improvement of Speech Recognizer in Noisy Environments Based on Auditory Modeling)

  • 정호영;김도영;은종관;이수영
    • 한국음향학회지
    • /
    • 제14권5호
    • /
    • pp.51-57
    • /
    • 1995
  • 본 논문에서는 청각 모델을 기초로 잡음에 강한 음성 특징 추출을 연구하였다. 청각모델은 basilar membrane 모델, 섬모세포(hair cell) 모델과 스펙트럼 출력단으로 구성하였다. Basilar membrane 모델은 음파의 진동에 따른 전달 특성을 묘사한 것으로 대역 통과 필터의 열로 나타난다. 섬모 세포 모델은 basilar membrane의 진동에 의한 신경 물질로의 변환을 나타낸다. 이것은 입력의 상대적인 값에 크게 반응하는 adaptation 기능을 이용하게 되며, 잡음 제거에 중요한 역할을 하게 된다. 스펙트럼 출력 단은 각 채널의 평균 firing rate를 이용하여 mean rate spectrum을 형성한다. 그리고 mean rate spectrum을 이용하여 특징 벡터를 추출하였다. 실험 결과는 청각 구조에 기초한 특징 추출이 다른 특징 추출 방법에 비해 잡음에서 더 향상된 성능을 가짐을 보였다.

  • PDF