• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.393-416
• /
• 2011

Hybrid acceleration-impedance sensor nodes on Imote2-platform are designed for damage monitoring in steel girder connections. Thus, the feasibility of the sensor nodes is examined about its performance for vibration-based global monitoring and impedance-based local monitoring in the structural systems. To achieve the objective, the following approaches are implemented. First, a damage monitoring scheme is described in parallel with global vibration-based methods and local impedance-based methods. Second, multi-scale sensor nodes that enable combined acceleration-impedance monitoring are described on the design of hardware components and embedded software to operate. Third, the performances of the multi-scale sensor nodes are experimentally evaluated from damage monitoring in a lab-scaled steel girder with bolted connection joints.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.37-42
• /
• 2003

A vorticity-velocity integro-differential formulation of incompressible Wavier-Stokes equations is described, focusing on a scheme for calculating pressure fields in application of the Lagrangian vortex method in connection with panel methods. It deals with the dynamic coupling among velocity, vorticity and pressure, and the Helmholtz decomposition of the velocity field, through a comparative study with the Eulerian finite volume method, we provide an extensive understanding of the Lagrangian vortex methods for numerical simulations of viscous flows around arbitrary bodies.

• 전산구조공학
• /
• 제7권4호
• /
• pp.137-144
• /
• 1994

기존 대형구조물의 안전진단에 관련하여 구조계의 동적계수를 실험적으로 추정하는 방법이 연구되었다. 시간영역방법인 순차적 예측오차방법과 주파수영역의 방법인 주파수응답함수 추정법이 비교검토되었다. 기법의 검증은 2 Bay 3층 구조물 모형에 대해서 수행되었는데, 각 실험적 방법에 의한 추정결과는 일관된 추정치를 보이었다. 그러나, 유한요소법에 의한 결과와는 차이를 보이었다. 이 차이는 구조해석시 절점조건에 대한 부적절한 모형화에 기인한 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.57-63
• /
• 2019

During the last two decades, much joint research regarding vibration based methods has been done, leading to developing various algorithms and techniques. These algorithms and techniques can be divided into modal methods and signal methods. Although modal methods have been widely used for health monitoring and damage detection, signal methods due to higher efficiency have received considerable attention in various fields, including aerospace, mechanical and civil engineering. Signal-based methods are derived directly from the recorded responses through signal processing algorithms to detect damage. According to different signal processing techniques, signal-based methods can be divided into three categories including time domain methods, frequency domain methods, and time-frequency domain methods. The frequency domain methods are well-known and interest in using them has increased in recent years. To determine dynamic behaviours, to identify systems and to detect damages of bridges, different methods and algorithms have been proposed by researchers. In this study, a new algorithm to detect seismic damage in the bridge's piers is suggested. To evaluate the algorithm, an analytical model of a bridge with simple spans is used. Based on the algorithm, before and after damage, the bridge is excited by a sine force, and the piers' responses are measured. The dynamic specifications of the bridge are extracted by Power Spectral Density function. In addition, the Least Square Method is used to detect damage in the bridge's piers. The results indicate that the proposed algorithm can identify the seismic damage effectively. The algorithm is output-only method and measuring the excitation force is not needed. Moreover, the proposed approach does not need numerical models.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.28-41
• /
• 2009

We know the several construction methods for underwater tunnel, but properly submerged concrete box type tunnel was mostly good structure stability and mostly shot length of tunnels. Submerged box type tunnel was buildup the unit segments in dry dock or ship yard by 10 to 20meters. The submerged box was composed with segments was join each together. It was installing the gate and waterproofing the coupling the front hull of a box. The complete submerged box rise up to the surface water, tow in the submerged box by tugboat, going to the destination of tunnel construction site. Beforehand dredge up soil at the bottom of a underwater, sinking the submerged box, connection together complete submerged box in underwater. The research and development ILM tunneling method is receiving careful study. Biggest weakness in submerged concrete box type tunnel was pressure waterproofing, box to box connecting, complete submerged boxes navigation and installation, after operation the submerged tunnel and management concrete box structure. It was positive evidence in submerged concrete box type tunnel. We make a practical application of the principle "the ILM tunneling method in underwater construction methods."

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.79-84
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we would suggest 5 items of test methods considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, size of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• 대한치과의사협회지
• /
• 제53권9호
• /
• pp.644-655
• /
• 2015

Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.

• 의료법학
• /
• 제15권2호
• /
• pp.123-163
• /
• 2014

As results of analyzing judicial precedents about infection in hospitals in connection with mistakes and causality in medical litigations shows that the Mitigation of Law Principles To Prove responsibility in medical litigation has not been able to play its role compared to its intended purposes. And Major sentiment from those judgments is that a mistake can't be proved only by the fact that certain infection in hospital occurred in connection with hospital infection. Therefore, the number of indirect facts to deny estimation is overwhelmingly high. Like this, especially for hospital infection which is difficult to prove indirect facts themselves to estimate mistake, major sentiment from those judgments have a problem that impute sharing of losses caused by hospital infection to patient. In accordance with the Principles of equitable and proper sharing of losses, it's required to prepare legal interpretation and theoretical methods to largely mitigate patient's responsibility to prove medical mistakes compared to other medical litigations in connection with existing Mitigation of Law Principles To Prove responsibility and conventional theory of estimation. In connection with this, the results of review that duty of safety management in hospital infection cases can be the base of conversion of proving responsibility, the duty that prevent hospital infection, corresponding the duty of safety management in hospital infection is not conventional duty of safety management based on duty of good faith but secondary obligation of medical contract. The breach of duty preventing hospital infection is the violation of medical contract, but there is no logical necessity that convert proving responsibility from the obligation of contract itself. Therefore, the duty of preventing hospital infection from the obligation of medical contract, corresponding the duty of safety management in hospital infection cases cannot be the base of conversion of proving responsibility alone. But, it's still required to conversion of proving responsibility in hospital infection, we need further studies on cases of Germany which applies legal estimation of proving responsibilities in hospital infection.

• 한국강구조학회 논문집
• /
• 제19권3호
• /
• pp.303-312
• /
• 2007

경간 40m~100m 정도 경간에 대해 일반적으로 강 박스 거더교에 대한 설계가 이루어지고 있다. 상부구조의 자중을 줄이기 위해서 복합트러스 교량에서 복부의 콘크리트 웹 대신에 강 사재가 사용되고 있다. 이러한 복합트러스 교량의 설계 시 가장 중요한 부분 중의 하나가 콘크리트 상 하부를 연결하는 연결부의 형태이다. 이러한 접합부는 외부에서 작용하는 조합하중을 분담해야하는데, 아직 이러한 접합구조에 대한 명확한 설계기준이 없는 실정이다. 한계상태에서 격점부의 하중전달에 대한 명확한 연구와 설계방법에 대한 조사가 필요하다. 콘크리트 상 하부를 연결하는 격점부 사재는 다양한 연결형태가 있다. 이번 논문에서는 거셋 플레이트에 용접되어진 그룹 스터드 연결재에 관한 연구가 수행되었다. 25mm 절곡 스터드를 사용하여 수행된 전단실험을 통하여 현재의 스터드 간 최소기준 간격을 만족하는 상태에서는 현재의 설계 규정을 사용할 수 있음을 밝혔다. 휨-전단 실험을 통해서는 조합하중이 작용하는 격점부의 상세를 개선하였다. 격점부의 인발강도를 증진시키기 위해서 절곡 스터드가 제안되었고 그룹 스터드의 최 외측 스터드에 적용되었다. 이러한 결과들을 바탕으로 복합 트러스 교량의 개선된 격점부 상세가 개선되고 설계 방안이 제안되었다.

• 대한치과보철학회지
• /
• 제47권1호
• /
• pp.29-38
• /
• 2009

연구목적: 본 연구에서는 주조연결부의 하중 전달기전과 함께 연결강도를 증진시킬 수 있는 기계적 유지구 설계 방법을 주조연결한 3-unit 고정성 국소의치의 삼차원 유한요소 모형으로 응력분포를 비교 관찰하여 알아보고자 하였다. 연구 재료 및 방법: 10개의 유한요소 모형을 형성하였다. (모형 A: 1개의 유지구, 모형 B: 2개의 유지구, 모형 C: 3개의 유지구, 모형 D: 4개의 유지구, 모형 E: 1개의 수평구와 2개의 수직구, 모형 F: 2개의 수평구와 1개의 수직구, 모형 G: 크기가 증가된 1개의 유지구, 모형 H: 크기가 증가된 2개의 유지구, 모형 I: 높이가 증가된 1개의 유지구, 모형 J: 기저부 너비가 증가된 1개의 유지구). 하악 제 1대구치에서 이차 주조체 양측의 근심와와 원심와에 수직하중을 가하였다. 결과: 일차 주조체와 이차 주조체 간의 유지력과 유지구 형성 후에 남아 있는 일차 주조체 연결부의 두께가 주조연결부의 강도에 영향을 주는 주요소였다. 유 지구의 개수나 크기 증가에 따른 유지력 증가는 응력을 분산시키는 효과를 나타냈으나 경우에 따라서는 상대적으로 일차 주조체의 연결부 두께를 감소시켜 응력 값이 증가하는 결과를 초래하였으며, 주조연결부의 기계적 실패는 이차 주조체보다는 일차 주조체에서 일어날 가능성이 높았다. 결론: 주조연결을 위한 유지구 형성 시에는 일차 주조체 연결부의 잔존 금속 두께를 고려하여 유지구의 개수를 제한하고, 이와 함께 일차 주조체와 이차 주조체간의 유지력을 최대화하기 위하여 유지구의 기저면보다는 깊이를 증가시키는 유지구 설계가 바람직한 방법으로 생각된다.