• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.571-579
• /
• 1997

There are some transmission types on the reverse link of wideband DS-CDMA cellular system. The configurations of logical channels on the reverse link may be different dependent upon the transmission methods of reverse pilot or control signaling. In this paper, we present three transmission types on the wideband DS-CDMA reverse link; no-pilot system, pilot-channel aided system and pilot-symbol aided system. And we compare the performance of three systems in terms of capacity and cell coverage. The pilot-symbol aided system is shown to have the better performance than the pilot-channel aided system in both capacity and cell coverage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.3
• /
• pp.45-52
• /
• 2009

Power line communication or power line carrier (PLC) is a system for carrying data on a conductor and can also used for electric power transmission. Now the powers used in the motor drive system are mostly DC sources. Even AC powers in some systems are generated from DC sources by the inverter. It is can be forecasted that the DC-link PLC technology will be widely used in various industrial fields. In this paper a novel BLDC motor control system using ASK DC-link PLC technology is proposed. The characteristic of this system is that the communication only needs 2 DC lines and there are no additional lines to translate the reference signals. The number of signal cables can be minimized when the DC-link PLC method is applied in the multi motor control system and the slip ring design also can be simplified when this method is applied in rotation machines. The proposed motor control system is clarified by the PSIM and MATLAB simulations and tested through the hardware prototype.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.103-104
• /
• 2006

In this paper, we analyze the UAV datalink design with calculating link budget of long-distance (200 km) Ku-band LOS wireless link. We calculate C/N of the real system and compare it with the required C/N, using the CCIR reports. In the rainy day of summer on the Korean peninsula, to maintain percent reliability 90% and BER 10^(-5) together, link budget of uplink of the system has a lot of margin at 200 km, link budget of downlink using the block turbo code is enough for distance 200 km.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.10-23
• /
• 1996

In this paper, the reverse link performance evaluation with synchronous CDMA is analyzed in the PCS system, which is the schem based on proposed method of KMT-PCS to increase the capacitance of cellular CDMA system. We make the baseband system model of CDMA reverse link, and then analyze system performance and subsystem techniques considering effect of channel and power control that are improtant factor influencing system performance in the PCS system. Based on this result, the paper presents primary technique analyses required at synchronous reverse link proposed by the KMT, which compose of initial synchronization range in initial synchronization step and control signal period in the synchronization maintenance step.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.342-348
• /
• 2021

The PV module of solar power systems requires maximum power point tracking (MPPT) technique because the power-voltage and current-voltage characteristics vary depending on the surrounding environment. In addition, the 120 Hz ripple voltage on the DC-Link is caused by the imbalance of the system voltage and current. The effect of this 120 Hz ripple voltage reduces the efficiency of the power generation system by increasing the output current distortion rate. Increasing the capacity of DC-Link can reduce the 120 Hz ripple voltage, but this method is inefficient in price and size. We propose a technique that detects 120 Hz ripple voltage and reduces the effect of ripple voltage without increasing the DC-Link capacity through a controller. The proposed technique was verified through simulations and experiments using a 1 kW single-phase solar power system. In addition, the proposed technique's feasibility was demonstrated by reducing the distortion rate of the output current.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.146-150
• /
• 2004

The Tactical Data Link System(TDLS) is a standardized communication link to exchange and interface positional, situational information, command and control in real time. It has been evaluated that the link would play an important role for tactical interoperability, situation awareness, and execution of joint operations in the future war. This work presents how to embody the TDLS through the systems engineering approach on the base of TDLS operating concept analysis of helicopters-groud units.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.342-344
• /
• 1996

This paper describes the usefulness of new control method in HVDC link system which suffers from severe condition of weak ac system. The proposed control scheme is used for the positive feedback control which directly controlls dc current at dc link system. The object of this paper is to improve the transient response of HVDC link system in disturbances such as faults. To achieve this objective, digital time-domain simulations are employed by the Electro Magnetic Transient Program for DC system(EMTDC).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.610-617
• /
• 1987

This thesis is concerned with fault-tolerance of a B-net (Beta-network) which is a kind of interconnection network in the multicomputer system. In this paper, a method for obtaining Maximal Tolerable Fault Set(MTFS) of link line connecting switching elements in the arbitrary B-net is presented. Using this method, it is seen that testing of DFA capability is possible when s-a-faults of link line occur, and criterion for determining degree of fault- tolerance of a B-net in terms of link line is introduced.