• 한국진공학회지
• /
• 제4권S2호
• /
• pp.30-33
• /
• 1995

By using X-ray double crystal diffraction technique the multilayer structure composed of glass membrane, platinum film and $\alpha Al_2O_3$ substrate has been studied. It is found the stress is produced in the film by thermal mismatch within multilayer materials. The measuring results of thin film platinum resistors show that the stress were induce resistance change of device and different stress status will produce add resistance in different direction. Selecting proper glass material can make opposite stress in Pt film and opposite add resistance due to thermal mismatch. The reliability of Pt resistor has been improved with method of this stress compensation.

• 한국재료학회지
• /
• 제25권3호
• /
• pp.125-131
• /
• 2015

Fluorine-doped $SnO_2$ (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of $300^{\circ}C$, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (${\sim}14.9{\Omega}/{\Box}$), high optical transmittance (~88.6 %), the best FOM (${\sim}19.9{\times}10^{-3}{\Omega}^{-1}$), and excellent thermal stability at an annealing temperature of $300^{\circ}C$ owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

• 한국결정성장학회지
• /
• 제27권3호
• /
• pp.105-109
• /
• 2017

고주파 유도 가열 장치를 이용하여 승화법으로 성장된 AlN 단결정을 질소 분위기 하에서 $1200^{\circ}C$와 $1500^{\circ}C$에서 열처리하였다. 열처리 후 단결정 시편들의 표면을 광학현미경으로 관찰하였으며, DCXRD(Double crystal X-ray Diffractometry)를 이용하여 FWHM(Full width of half maximum) 값을 측정하여 결정성의 변화를 평가하였다.

• 한국표면공학회지
• /
• 제51권3호
• /
• pp.164-171
• /
• 2018

In this study, we have fabricated pure titanium (Ti)/hydroxyapatite (HA) double layer coating on medical grade PEEK from magnetron sputtering system, an investigation was performed whether the surface can be had more improve bio-active for orthopedi/dental applications than that of non-coated one. Pure Ti and HA coating layer were obtained by a radio-frequency and direct current power magnetron sputtering system. The microstructures surface, mechanical properties and wettability of the pure Ti/HA double layer deposited on the PEEK were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), nano-indentation, and contact angle test. According to the EDS and XRD results, the composition and crystal structure of pure Ti and HA coated surface were verified. The elastic modulus and hardness value were increased by pure Ti and HA coating, and the pure Ti/HA double layer coating surface has the highest value. The contact angle showed higher value for pure Ti/HA double layered coating specimens than that of non-coated (PEEK) surface.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.156-161
• /
• 2005

The thermal transitions of a nylon 6/layered silicate nanocomposite were studied by differential scanning calorimetry and in-situ synchrotron X-ray diffraction. The drawn film of the nylon 6/layered silicate nanocomposite typically showed three endotherms in the DSC thermogram; a very broad endotherm at $\sim120^{\circ}C(T_{1})$, a double-melting endotherm at $\sim215^{\circ}C(T_{2})$, and a high temperature endotherm at $\sim240^{\circ}C(T_{3})$. The drawn film of the nylon 6/ layered silicate nanocomposite was comprised of a mixture of the $\alpha and \gamma$ forms, with $the \alpha form$ being generated by drawing the pressed film having $the \gamma form$. The melting and crystallization of the crystals were observed at the above thermal transitions during the heating experiment performed at the Pohang X-ray synchrotron radiation source (4C2). The newly generated form was meta-stable and melted $at {\sim}T_{1}$. The double-melting $at {\sim}T_{2}$ was due to the exothermic crystallization of $the \alpha form$ during the main endothermic melting of $the \gamma form$. $The \alpha form$ crystallized $at {\sim}T_{2}$ and melted $at {\sim}T_{3}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제7회 학술발표회 및 한·일 CVD 심포지움 논문개요집
• /
• pp.94-96
• /
• 1994

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제9회 학술발표회 논문개요집
• /
• pp.139-139
• /
• 1995

• Journal of Chest Surgery
• /
• 제23권1호
• /
• pp.201-204
• /
• 1990

The double aortic arch is the commonest anomaly among the vascular rings are relatively rare congenital vascular anomalies. This anomaly is malformation of the aortic arch system may, by compression of the trachea and esophagus, cause respiratory distress and dysphagia. We experienced one case of double aortic arch with right sided descending aorta with predominant right anterior arch treated surgically at Kyung Hee University Medical Center. 1-year-old male patient with acute airway obstruction due to combination of double aortic arch and right descending aorta. The diagnosis was made by simple X-ray & confirmed by barium esophagogram & aortogram. The operative approach was through left thoracotomy & underwent division of the left aortic arch & division of ligamentum arteriosum & suspension of divided proximal end of anterior arch to anterior thoracic wall. The postoperative courses was uneventful and doing well on the 3 years.

• Advances in pediatric surgery
• /
• 제2권1호
• /
• pp.68-71
• /
• 1996

Esophageal atresia(EA) with a double tracheoesophageal fistula(TEF) is rare. It accounts for only 0.7% of all cases of EA and TEF. A male newborn weighing 2860g was born by normal vaginal delivery at 41 weeks' gestation to a 27-year-old mother who had a normal pregnancy. But immediately developed recurrent choking and respiratory distress. Feeding tube was inserted and chest X ray showed the feeding tube coiled in the proximal pouch(T-2 level). With a preoperative diagnosis of EA and distal TEF, the thoracotomy was performed on the third day of life. At thoracotomy, TEF was proved to be a double fistula. Both fistulas were divided and an esophageal anastomosis was performed. The postoperative course was uncomplicated until the eighth postoperative day when a minor anastomotic leak. The patient was discharged at 103 days of age.

• 대한화학회지
• /
• 제28권5호
• /
• pp.302-308
• /
• 1984

이중희석법을 이용한 X-선 분광법으로 주석-슬랙 중 $Ta_2O_54, $Nb_2O_5$ 및 $ZrO_2$등을 정량하였다. 주석시료와 이것과 조성이 비슷한 한개의 합성표준시료를 무수 $Li_2B_4O_7$으로 희석하여 희석된 시료중 이들의 함량이 1.00%, 2.00%, 3.00% 되게 잘 혼합하였다. 혼합시료를 $1,150^{\circ}C$에서 30분간 용융하여 유리상태로 만들었다. 다시 잘 분쇄하고, 유압기를 이용하여 Pellet로 만들어 분석 시편으로 사용했다. 형광 X-선 세기를 측정하여 희석식에 대입하여 각 시료에서 분석성분의 함량을 계산하였다. 이중희석법으로 얻은 분석결과들은 대표적인 분석법인 표준검정 곡선법에 의한 값들과 혀용오차범위내에서 잘 일치하고 있다. 아울러 단일희석법에 의한 결과와도 잘 일치하고 있으며 각 분석결과에 대한 재현성도 좋음을 보여 주었다.