• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.394-394
• /
• 2012

We fabricated organic-inorganic superlattice films using molecular layer deposition (MLD) and atomic layer deposition (ALD). The MLD is a gas phase process in the vacuum like to atomic layer deposition (ALD) and also relies on a self-terminating surface reaction of organic precursor which results in the formation of a monolayer in each sequence. In the MLD process, 'Alucone' is very famous organic thin film fabricated using MLD. Alucone layers were grown by repeated sequential surface reactions of trimethylaluminum and ethylene glycol at substrate temperature of $80^{\circ}C$. In addition, we developed UV-assisted $Al_2O_3$ with gas diffusion barrier property better than typical $Al_2O_3$. The UV light was very effective to obtain defect-free, high quality $Al_2O_3$ thin film which is determined by water vapor transmission rate (WVTR). Ellipsometry analysis showed a self-limiting surface reaction process and linear growth of each organic, inorganic film. Composition of the organic films was confirmed by infrared (IR) spectroscopy. Ultra-violet (UV) spectroscopy was employed to measure transparency of the organic-inorganic superlattice films. WVTR is calculated by Ca test. Organic-inorganic superlattice films using UV-assisted $Al_2O_3$ and alucone have possible use in gas diffusion barrier for OLED.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.555-568
• /
• 2023

The diffusion strategies of wood culture were established using the analytic hierarchy process, to prepare a diffusion plan of wood culture and wood utilization in response to climate change due to global warming. 'Standardization of wood culture', 'Valuation of wood culture', and 'Habituation of wood culture' were set as three major implementation strategies and priorities were evaluated. As a result, it was analyzed in the following order: 'Development of systematic education programs for each age group for rational and efficient use of eco-friendly wood materials and development of wood education standard guidelines linked to the curriculum', 'Preparation of scientific basis data on human compatibility and eco-friendliness of wood to ensure the reliability of wood and wood products', and 'Establishment of monitoring and improvement plan through the designation as a model school'. Through this, it was determined that an educational environment, changes in public attitudes through publicity, and expanding opportunities to use wood and wood products were necessary for wood culture diffusion. The results of this study can be used as basic data to derive the diffusion strategies of wood culture and establish a roadmap and policy implementation strategy to revitalize wood culture.

• Asia pacific journal of information systems
• /
• v.10 no.4
• /
• pp.1-20
• /
• 2000

Electronic Data Interchange(EDI) has the potential to improve business operations by expediting the exchange of business documents. It will also provide substantive operational and strategic benefits to the trading firms. However, the successful implementation of EDI systems requires the mutual trust and cooperation between the trading firms. The extent of EDI diffusion and performance depends on inter-organizational, intra-organizational, as well as innovation factors. Researches based on the sociopolitical process framework in the use of IT, organizational theory, resource dependence theory, and innovation diffusion theory have identified 3 inter-organizational variables(transaction climate, dependence, external IS expert support) and 4 intra-organizational variables(strategic IS planning, infrastructure, top management support, education/training,), and 3 innovation variables(compatibility, relative advantage, cost) that affect EDI diffusion. In this study, a multi-dimensional measure on EDI diffusion has been developed to capture the external and internal integration. Then, the influence of these 10 variables on the extent to which the EDI adopting firms pursue diffusion has been examined. Whether more diffusion leads to superior performance has also been studied. International trade managers from 107 firms in the trade industry participated in a field survey. The results based on a structural equation model(SEM), developed using AMOS, provide quite a strong support for the hypothesized relations. Both education/training and IT infrastructure influenced external and internal diffusion of EDI systems. Internal diffusion of EDI enables the adopting firms to improve operational and strategic performance, whereas external diffusion contributes only to operational performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.188-188
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Meta Oxide Semiconductor) based electronic devices, the electronic devices, become much faster and smaller size that are promising property of semiconductor market. However, very narrow interconnect line width has some disadvantages. Deposition of conformal and thin barrier is not easy. And metallization process needs deposition of diffusion barrier and glue layer for EP/ELP deposition. Thus, there is not enough space for copper filling process. In order to get over these negative effects, simple process of copper metallization is important. In this study, Cu-V alloy layer was deposited using of DC/RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane SiO2/Si bi-layer substrate with smooth surface. Cu-V film's thickness was about 50 nm. Cu-V alloy film deposited at $150^{\circ}C$. XRD, AFM, Hall measurement system, and AES were used to analyze this work. For the barrier formation, annealing temperature was 300, 400, $500^{\circ}C$ (1 hour). Barrier thermal stability was tested by I-V(leakage current) and XRD analysis after 300, 500, $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However vanadium-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Therefore thermal stability of vanadium-based diffusion barrier is desirable for copper interconnection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.461-465
• /
• 2021

A diffusion heat treatment process for YBa₂Cu₃O_7-y bulk superconductor in a Gd₂O₃ powder was attempted. As a result of measuring the critical temperature of the superconducting bulk, there was no change in the superconducting transition temperature as the Gd particles diffused into the YBa₂Cu₃O_7-y lattice, resulting in dense microstructure. As a result of measuring the critical current, the critical current density (J_c) of the superconducting bulk having treated by the Gd thermal diffusion treatment at 0 T increased to 3×10⁴ A/cm² at 0 T, which was higher than that of the superconducting bulk without thermal diffusion treatment. The surface magnetic force of the superconducting bulk with Gd thermal diffusion treatment was observed at the center of the superconducting bulk with the maximum trapped magnetic force (Hmax) of 1.51 kG. This result means that the Gd thermal diffusion treatment contributes to improving the critical current density Jc of YBa₂Cu₃O_7-y, and it is believed that Gd particles migrating into the superconducting bulk through thermal diffusion either fill the surface pores of YBa₂Cu₃O_7-y superconductors or act as a flux pinning center.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.852-856
• /
• 2011

The lithium ion diffusion coefficients of bare, carbon-coated and Cr-doped $LiFePO_4$ were obtained by fitting the discharge curves of each half cell with Li metal anode. Diffusion losses at discharge curves were acquired with experiment data and fitted to equations. Theoretically fitted equations showed good agreement with experimental results. Moreover, theoretical equations are able to predict lithium diffusion coefficient and discharge curves at various discharge rates. The obtained diffusion coefficients were similar to the true diffusion coefficient of phase transformation electrodes. Lithium ion diffusion is one of main factors that determine voltage drop in a half cell with $LiFePO_4$ cathode and Li metal anode. The high diffusion coefficient of carbon-coated and Cr-doped $LiFePO_4$ resulted in better performance at the discharge process. The performance at high discharge rate was improved much as diffusion coefficient increased.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.263-271
• /
• 2021

The study examined the XBRL adoption process of Malaysian Business Reporting System (MBRS) by utilizing Everett Rogers' Diffusion of Innovation (DOI) theory. The study focused on the three phases, namely, knowledge gathering and persuasion phase, decision-making phase, and implementation phase of XBRL adoption process gathered from a government agency in Malaysia. This study employs a qualitative case study that incorporates semi-structured interviews with four members of the regulator. The results reveal that the regulator has realized the advantages, management support, and need to skills development in phase one. On the other hand, in phase two, it finds the way the regulator makes decision related to XBRL taxonomy and submission template, platform, tools and software. Through phase three, the regulator is concerned with the complexity of XBRL taxonomy, resources, external support, promotion, stakeholder involvement, limited trading pressure, critical mass, and professional bodies. The factors from each phase suggest an in-depth understanding on the experience of XBRL through the development of MBRS that provides a success story to the other government agencies and regulators in Malaysia. This study provides several insights on the factors that could contribute to the adoption of XBRL and the Diffusion of Innovation theory adoption process.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.333-341
• /
• 2014

The purpose of this study is to forecast the penetration rate of renewable energy and a reasonable scale for the R&D investment plan in Korea based on the relationship between the diffusion and R&D investments drawn by analogy from empirical cases of advanced countries. Among numerous candidate developed countries, the German market was chosen based on the similarity of the diffusion patterns to those of the Korean plan. We then figured out how the investment triggers the growth of technology from the selected benchmark, and applied the technology S-curve relation formula to derive the desirable investment plan for Korea. The present paper is a pioneering attempt to forecast the diffusion process of renewable energy technology in Korea using the comparative analogy from cases of advanced countries.

• Korean Journal of Cognitive Science
• /
• v.33 no.3
• /
• pp.155-168
• /
• 2022

In this paper, we introduce the SNUDM-G, a diffusion model analysis tool with improved computational speed. Although the diffusion model has been applied to explain various cognitive tasks, its use was limited due to computational difficulties. In particular, SNUDM(Koh et al., 2020), one of the diffusion model analysis tools, has a disadvantage in terms of processing speed because it sequentially generates 20,000 data when approximating the diffusion process. To overcome this limitation, we propose to use graphic processing units(GPU) in the process of approximating the diffusion process with a random walk process. Since 20,000 data can be generated in parallel using the graphic processing units, the estimation speed can be increased compared to generating data through sequential processing. As a result of analyzing the data of Experiment 1 by Ratcliff et al. (2004) and recovering the parameters with SNUDM-G using GPU and SNUDM using CPU, SNUDM-G estimated slightly higher values for certain parameters than SNUDM. However, in term of computational speed, SNUDM-G estimated the parameters much faster than SNUDM. This result shows that a more efficient diffusion model analysis for various cognitive tasks is possible using this tool and further suggests that the processing speed of various cognitive models can be improved by using graphic processing units in the future.

• Transactions of Materials Processing
• /
• v.22 no.5
• /
• pp.269-274
• /
• 2013

Experiments and numerical simulations of the incremental upsetting test were carried out to investigate void closure behavior and mechanical characteristic of a 1.5wt%C ultra-high carbon steel. The experimental results showed that the voids become quickly smaller as the reduction ratio increases. The simulation results confirmed this behavior and indicated that the voids were completely closed at a reduction ratio of about 40~45% during incremental upsetting. After the completion of the incremental upsetting tests, the process of diffusion bonding was employed to heal the closed voids in the deformed specimens. To check the appropriate temperature for diffusion bonding, deformed specimens were kept at 800, 900, 1000 and $1100^{\circ}C$ for an hour. In order to investigate the effect of holding time for diffusion bonding at $1100^{\circ}C$, specimens were kept at 10, 20, 30, 40, 50 and 60minutes in the furnace. A distinction between closed and healed voids was clearly established using microstructural observations. In addition, subsequent tensile tests demonstrated that complete healing of a closed void was achieved for diffusion bonding temperatures in the range $900{\sim}1100^{\circ}C$ with a holding time larger than 1 hour.