• 약학회지
• /
• 제8권4호
• /
• pp.96-99
• /
• 1964

In the previous study, the composition ratios of the Cu-sulfa drugs complexes determined by gravimetric and solvent extraction method reported. In this paper, the continuous variations method has been used to know whether the complexes are simple complexes or chelates, and to recertify the composition ratios of the complexes at pH 7-8. It has been certified that the ratio of $Cu^{+2}$ ion to sulfa drugs in 1:2 from the result of this experiment.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.174-179
• /
• 2011

Ultra-thin aluminum (Al) and tin (Sn) films were grown by dc magnetron sputtering on a glass substrate. The electrical resistance R of films was measured in-situ method during the film growth. Also transmission electron microscopy (TEM) study was carried out to observe the microstructure of the films. In the ultra-thin film study, an exact determination of a coalescence thickness and a continuous film thickness is very important. Therefore, we tried to measure the minimum thickness for continuous film (dmin) by means of a graphical method using a number of different y-values as a function of film thickness. The raw date obtained in this study provides a graph of in-situ resistance of metal film as a function of film thickness. For the Al film, there occurs a maximum value in a graph of in-situ electrical resistance versus film thickness. Using the results in this study, we could define clearly the minimum thickness for continuous film where the position of minimum values in the graph when we put the value of Rd3 to y-axis and the film thickness to x-axis. The measured values for the minimum thickness for continuous film are 21 nm and 16 nm for sputtered Al and Sn films, respectively. The new method for defining the minimum thickness for continuous film in this study can be utilized in a basic data when we design an ultra-thin film for the metallization application in nano-scale devices.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.272-278
• /
• 2010

A method for damage detection in a plate structure is presented based on strain waves that are generated by impact or damage in the structure. Strain responses from continuous sensors, which are long ribbon-like sensors made from piezoceramic fibers or other materials, were used with a neural network technique to estimate the damage location. The continuous sensor uses only a small number of channels of data acquisition and can cover large areas of the structure. A grid type structural neural system composed of the continuous sensors was developed for effective damage localization in a plate structure. The ratios of maximum strains and arrival times of the maximum strains obtained from the continuous sensors were used as input data to a neural network. Simulated damage localizations on a plate were carried out and the identified damage locations agreed reasonably well with the exact damage locations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.94.2-94
• /
• 2002

$\textbullet$ The method to have real-time response at the motion control. $\textbullet$ The trajectory generation method guarantees the continuous acceleration in changing the velocity during the actuator is moving. $\textbullet$ We propose the velocity profile generation algorithm in order to change object position or object velocity with continuous acceleration using blending method.

• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.180-185
• /
• 2008

A new method for relative error continuous and discrete time model order reduction is proposed. The reduction technique is based on two recently developed methods, namely frequency domain balanced truncation within a frequency bound and inner-outer factorization techniques. The proposed method is of interest for practical model order reduction because in this context it shows to keep the accuracy of the approximation as high as possible without sacrificing the computational efficiency. Numerical results show the accuracy and efficiency enhancement of the method.

• 한국식품영양학회지
• /
• 제1권2호
• /
• pp.31-36
• /
• 1988

An adaptive on-line optimization method has been applied to test the ability to maximize the cellular productivity of a continuous methylotroph culture system which was simulated by a variable yield Monod-type model. Optimum dilution rate and productivity were successively obtained and maintained at all times by the algorithm that utilizes steepest descent technique as optimization method and recursive least-square method with forgetting factor as dynamic model identification.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.133-136
• /
• 2002

In this paper, we propose a method to extract vertical stripes projected on human face using Gabor filter, Previous work cannot extract continuous vertical stripes in the eye and mouth region due to their horizontal lines, Proposed method use Gator filter adaptively according to main frequencies and directions of stripes in each block. Experimental results show that Proposed method can extract continuous vertical stripes in the eye and mouth region

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.243-248
• /
• 2007

A three-dimensional (3D) unstructured hydrodynamic solver for transient two-phase flows has been developed. A two-fluid three-field model was adopted for the two-phase flows. The three fields represent a continuous liquid, an entrained liquid, and a vapour field. The hydrodynamic solver is for the 3D component of a nuclear system code and the component-scale analysis tools for transient two-phase flows. The finite volume method and unstructured grid are adopted, which are useful for the flows in a complicated geometry. The semi-implicit ICE (Implicit Continuous-fluid Eulerian) numerical scheme has been adapted to the unstructured non-staggered grid. This paper presents the numerical method and the preliminary results of the calculations. The results show that the numerical scheme is robust and predicts the phase change and the flow transitions due to boiling and flashing problems well.

• 수산해양교육연구
• /
• 제29권2호
• /
• pp.492-502
• /
• 2017

The purpose of this study was to verify the influences of surfing participants' participation motivation on flow experience and continuous participation intention. The study conducted a research survey through purposive sampling method after selecting 2 surfing center in Ganwon-do. 280 questionnaires distributed and 269 were selected as final valid sample by removing 11 questionnaires that have insufficient answers. Then data were analyzed through exploratory factor analysis, reliability analysis, correlation analysis, and multiple regression analysis using SPSS Window ver. 20.0. The results were as followings. First, participation motivation factors have positive effect on flow experience. Second, participation motivation factors have an influence on continuous participation intention. Third, flow experience have an influence on continuous participation intention. Fourth, leisure flow have an influence on continuous participation intention.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.286-287
• /
• 2008

The determination of roll speeds in continuous rolling system is an important factor along with the design of roll profile and roll gap. The tensile force on the workpiece induces reduced cross section area and the compressive force induces wrinkles. To determine the optimal roll speeds of current rough rolling system for wire rod, FE analysis was performed. We could predict the workpiece shape and the stress level more precisely by considering the elasto-plastic behavior of workpiece. Also the efficient analysis methodology is presented to reduce the calculation time by combining the ALE and lagrangian method.