• 한국물환경학회지
• /
• 제27권5호
• /
• pp.689-698
• /
• 2011

In South Korea, Total Maximum Daily Load (TMDL) has been enforced since 2004 to restore and manage water quality in the watersheds. However, the appraisal of TMDL in South Korea has lots of weaknesses to establish the plan for recovery of water quality because it just evaluates the target water quality during the particular flow duration interval. In the United States, Load Duration Curve (LDC) method bas been widely used in the TMDL to evaluate the water quality and pollutant loads considering variation of stream flow. In a recent study, web-based Load Duration Curve system was developed to create the LDC automatically and provide the convenience of use. In this study, web-based Load Duration Curve system was applied in the Gapyeongcheon watershed using the daily flow and 8-day interval water quality data, and Q-L Rating Curve was used to evaluate the water quality and pollutant load in the watershed, also. As a result of study, water quality and pollutant load in Gapyeongcheon watershed were met with water quality standard and allocated load in the all flow durations. Web-based Load Duration Curve system could be applied to the appraisal of South Korean TMDL because it can be used to judge the impaired flow duration and build up the plan of load reduction, and it could enhance the publicity. But, web-based Load Duration Curve system should be enhanced through addition of load assessment tools such as Q-L rating curve to evaluate water quality and pollutant load objectively.

• 한국건설관리학회논문집
• /
• 제6권2호
• /
• pp.102-110
• /
• 2005

우리나라 건설산업의 환경은 IMF를 기준으로 급격하게 변화하였다. IMF 이전에는 정부의 제도적인 보호막과 일부 관행으로 인해 안정된 환경을 보장받아왔으나 최근 대형 공공공사의 발주물량의 감소와 더불어 시장예측의 불확실성 증대, 공공 공사의 효율화 및 투명성 제고를 위한 입 $\cdot$ 낙찰 제도의 개선, 업체의 급격한 증가 등의 이유로 건설업계 경쟁은 더욱 치열해졌다. 이러한 경쟁의 심화는 조직구조가 취약하고 기술, 자금 등 경영자원이 부족한 중규모 건설업체가 환경변화에 신속히 대응하고 원가 절감 및 생산성 향상을 위한 지속적인 투자와 건설시장에서 살아남기 위한 전략수립을 요구하고 있다고 할 수있다. 따라서 본 연구에서는 중규모 건설기업을 대상으로 경영학의 산업구조분석 이론인 전략군 분석 이론을 응용하여 경쟁기업들 중 유사전략을 취하는 군집별 특성을 도출하여 제안함으로써 이를 통해 자사와 경쟁사의 경쟁영역 및 상대적 위치를 파악하고 미래 전략방향 결정을 위한 기초 자료로 활용될 수 있게 하고자 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.73-80
• /
• 2008

본 논문에서는 RC 구조물의 보수 보강 공사에 적용되는 FRP 복합체의 역학적 특성치를 평가하기 위하여 각국에서 제안된 시험규격을 비교 분석하고, 시험편 형상 및 시험방법의 차이가 재료성능에 미치는 영향에 대한 실험적 검증을 통하여 표준화된 시험방법 및 평가기준을 도출하고자 하였다. 주 실험변수는 FRP 복합체의 종류, 시험편의 폭, 보강매수 및 가력속도로 설정하였다. 본 시험결과에 의하면, 최대 인장강도와 최소변동계수를 나타내는 인장 시험편의 폭은 FRP의 종류/직조방법에 따라 다르게 나타났으며, 특히 적층형으로 시공되는 FRP 복합체는 보강매수에 따른 인장강도의 저하현상이 관측되므로, 이를 적절히 고려할 수 있는 평가기준의 설정이 필요할 것으로 판단된다.

• 한국환경보건학회지
• /
• 제42권1호
• /
• pp.19-26
• /
• 2016

Objectives: This study aimed to assess temporal changes in the level of culturable airborne fungi (CAF) in three microbiology laboratories and determine the environmental factors associated with CAF level. Methods: CAF levels were determined once per month from March 2011 to February 2012 in three microbiology laboratories. An Andersen one-stage sampler was used for five minutes, three times per day to collect the CAF. Arithmetic means of CAF concentrations and standard deviation (SD) were calculated. A Mann-Whitney test was applied to compare the differences between environmental factors such as divided room by structure of laboratory, use of humidifier, and use of air-conditioner. Correlation analysis was also applied to identify the association between CAF concentrations and environmental factors. Results: CAF levels demonstrated an increasing tendency in summer, and the three laboratories showed consistent seasonal patterns. Temperature and relative humidity (RH) were associated with CAF levels. When the humidifier was off, CAF concentrations were significantly higher in study rooms than in study rooms in which the humidifier was on. Conclusion: CAF levels in indoor microbiology laboratories varied greatly depending upon the temperature and RH and whether a humidifier was used.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.114-119
• /
• 2003

The building needs of the community are met by the interrelated construction activities of maintaining, modernizing and replacing the existing stock of building and by the erection of additional new building. Studying the service lift of buildings and how it is determined can serve as an important measuring stick in making decisions on construction policy. Therefore, the purpose of this study is to provide useful information for future construction through a comparative and analytical study of building structures on disappeared buildings. It was found that most building structure had a shorter service life than the standard set by The Korea Appraisal Board. This situation may have occurred due to the sharp rise in replacement of older buildings with new buildings for the purpose of monetary profit. To increase the economic life of buildings reduce losses of the nation's capital henceforth, examination on policy md steady study needs to be done.

• 교육녹색환경연구
• /
• 제10권1호
• /
• pp.34-41
• /
• 2011

Global environment is getting deteriorated at an alarming rate. Eco-school could be one of the effective solutions to project our environment and a good sample of architecture to economize in total energies, resources and greenhouse gases. In case of our country, the study of eco-school planning is not sufficient compared with other countries, so this paper would be a good study on the indoor environment of the classroom by surveying their opinions and ideas from the group of users in school facility. The result of this study shows that the proper installation of building equipment and nature ventilation system is necessary to provide delightful environment for the students and to save the energy. To ensure that we have adequate saving and protection it is necessary to change the existing appraisal standard.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.242-247
• /
• 2007

After the Industrialization of 1960s, while it has greatly contributed to the industrial development owing to acceleration of mechanization, but it is real situation that the countermeasure to Noise Damage generating at the loud noise workshop is scarcely made. Especially, the Instrument-Noise made at factory and workplace is so shocking and repeatedly reiterating terrible noise that most of the spot workers are forcedly imposing such dangers as the severe unpleasant feeling and hearing impairments. On such point of view, this Research has attempted to extract the proper Rating Vocabulary in order for valuation on Instrument Noise made at the terrible noise-workplace, therefore it is considering that those extracted Vocabularies could be utilized as the useful materials for appraisal on Instrument Noise, also for establishment of Regulation-Standard with regard to Acoustic Psychology Experimentation and Instrument Noise.

• 교육시설
• /
• 제15권6호
• /
• pp.4-11
• /
• 2008

Global environment is getting deteriorated at an alarming rate. Eco-school could be one of the effective solutions to protect our environment and a good sample of architecture to economize in total energies, resources and greenhouse gases. In case of our country, the study of eco-school planning is not sufficient compared with other countries, so this paper would be a good study on the indoor environment of the classroom by surveying their opinions and ideas from the group of users in elementary school. The result of this study shows that the proper installation of building equipment and nature ventilation system is necessary to provide delightful environment for the students and to save the energy. To ensure that we have adequate saving and protection, it is necessary to change the existing appraisal standard.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.410-414
• /
• 2007

Carbon contamination from the binder resin is an inherent problem with the metal powder injection molding process. Residual carbon in the W-Cu compacts has a strong impact on the thermal and electric properties. In this study, uncertainty was quantified to evaluate determination of carbon in a W-15%Cu MIM body by the combustition method. For a valid generalization about this evaluation, uncertainty scheme applied even to the repeatability as well as the uncertainty sources of each analyse step and quality appraisal sources. As a result, the concentration of carbon in the W-Cu part were measured as 0.062% with expanded uncertainty of 0.003% at 95% level. This evaluation example may be useful to uncertainty evaluation for other MIM products.

• 한국조리학회지
• /
• 제5권2호
• /
• pp.93-112
• /
• 1999

The purpose of this study making clear the range of overlapping affairs since many parts of cooker's & dietitian duties are overlapped in the Law of Hygiene & its over-ranked laws. The fact that there're overlapped parts in the different qualifying system endowed by the government may lead too many troubles between cooker's & dietitian who have their own qualification, so it's important to grasp correctly job specifications of cooker's & dietitian and to make clear the sphere of business. This studies present following affairs as cooker's duties through analysis. 1. Participation in the overall Management & Policy department. 2. Making the Menu & Standard recipe. 3. Purchasing, Inspection, Market research on Food materials. 4. Sanitary management. 5. Facility manage & Safety Management. 6. Research & Development on cooking Know-How. 7, Teaching for the members of department. 8. Supervision & business appraisal of cooking members. 9. Sales management & Cost control. 10. Utensil management & its Maintenance.