• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.1-7
• /
• 2021

In this paper, by embedding a bare-die chip-type drive amplifier into the PCB composed of ABF and FR-4, it implements an embedded active device that can be applied in 28 GHz band modules. The ABF has a dielectric constant of 3.2 and a dielectric loss of 0.016. The FR-4 where the drive amplifier is embedded has a dielectric constant of 3.5 and a dielectric loss of 0.02. The proposed embedded module is processed into two structures, and S-parameter properties are confirmed with measurements. The two process structures are an embedding structure of face-up and an embedding structure of face-down. The fabricated module is measured on a designed test board using Taconic's TLY-5A(dielectric constant : 2.17, dielectric loss : 0.0002). The PCB which embedded into the face-down expected better gain performance due to shorter interconnection-line from the RF pad of the Bear-die chip to the pattern of formed layer. But it is verified that the ground at the bottom of the bear-die chip is grounded Through via, resulting in an oscillation. On the other hand, the face-up structure has a stable gain characteristic of more than 10 dB from 25 GHz to 30 GHz, with a gain of 12.32 dB at the center frequency of 28 GHz. The output characteristics of module embedded into the face-up structure are measured using signal generator and spectrum analyzer. When the input power (P_in) of the signal generator was applied from -10 dBm to 20 dBm, the gain compression point (P_1dB) of the embedded module was 20.38 dB. Ultimately, the bare-die chip used in this paper was verified through measurement that the oscillation is improved according to the grounding methods when embedding in a PCB. Thus, the module embedded into the face-up structure will be able to be properly used for communication modules in millimeter wave bands.

• Land and Housing Review
• /
• v.13 no.4
• /
• pp.55-71
• /
• 2022

Recently, the domestic department store industry is growing into a complex shopping cultural space, which is advanced and differentiated by changes in consumption patterns. In addition, competition is intensifying across 70 places operated by five large companies. This study investigates the determinants of the visits to department stores using the big data concept's automatic vehicle access system (pos) and proposes how to strengthen the competitiveness of the department store industry. We use a negative binomial regression test to predict the frequency of visits to 67 branches, except for three branches whose annual sales were incomplete due to the new opening in 2021. The results show that the demand for visiting department stores is positively associated with airport, terminal, and train stations, land areas, parking lots, VIP lounge numbers, luxury store ratio, F&B store numbers, non-commercial areas, and hotels. We suggest four strategies to enhance the competitiveness of domestic department stores. First, department store consumers have a high preference for luxury brands. Therefore, department stores need to form their own overseas buyer teams to discover and attract new luxury brands and attract customers who have a high demand for luxury brands. In addition, to attract consumers with high purchasing power and loyalty, it is necessary to provide more differentiated products and services for VIP customers than before. Second, it is desirable to focus on transportation hub areas such as train stations, airports, and terminals in Gyeonggi and Incheon. Third, department stores should attract tenants who can satisfy customers, given that key tenants are an important component of advanced shopping centers for department stores. Finally, the department store, a top-end shopping center, should be developed as a space with differentiated shopping, culture, dining out, and leisure services, such as "The Hyundai", which opened in 2021, to ensure future growth potential.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.2
• /
• pp.187-217
• /
• 2022

The aim of this study is to examine the psychometric properties of the Korean version of the Post-traumatic Stress Disorder Checklist for DSM-5(PCL-5). For this purpose, online surveys were conducted for two times with a one year interval using the data from 1,077 Korean adults at time 1, and 563 Korean adults at time 2. First, from the result of the confirmatory factor analysis, comparing the model fit of the 1, 4, 6, and 7-factor model, the 4, 6, and 7-factor model showed a acceptable fit, and the best fit was seen in the order of the 7, 6, 4-factor model. Second, the internal consistency, omega coefficient, construct validity, average variance extracted, and test-retest reliability results were all satisfactory.. Third, a correlation analysis with the K-PC-PTSD-5 and the sub-factors of BSI-18 was conducted to check the validity of the Korean Version of PCL-5. As a result, a positive correlation was seen with both K-PC-PTSD-5 and BSI-18. Fourth, a hierarchical multiple regression was performed to examine whether the Korean Version of PCL-5 predicts future PTSD, depression, anxiety, and somatization. As a result, the Korean Version of PCL-5 measured at time 1 significantly predicted PTSD, depression, anxiety, and somatization symptoms at time 2. Fifth, by analyzing the ROC curve, the discriminant power of PCL-5 for screening PTSD symptom groups was confirmed, and the best cut-off score was suggested. As a result of the longitudinal validation of Korean version of PCL-5, it was found that this scale is a reliable and valid measure for Korean adults. By looking into the predictive validity of the scale, it was found that the Korean version of PCL-5 can predict not only PTSD symptoms but also PTSD-related symptoms such as depression, anxiety, and somatization. Also, this study differs from previous validation studies measuring PTSD symptoms in that it suggested a cut-off score to help differentiate PTSD symptom groups.

• The Korean Journal of Coaching Psychology
• /
• v.5 no.2
• /
• pp.127-170
• /
• 2021

This study developed a measure to measure wellness-seeking behavior in important areas of life for general adults in Korea and verified its validity. For the development of the wellness scale, 31 factors derived through literature review, expert interviews, in-depth interviews, open questionnaires 1 and 2, and 182 questions were selected as the final 10 factors and 99 questions. Through exploratory factor analysis of the results of the preliminary survey of 351 adults in Korea, 58 questions of 10 factors were derived, and some of the questions reflecting important concepts in each factor were revised, and this survey was conducted with 63 questions of 10 factors. In this survey conducted on 667 people, to verify the validity of the composition concept of this test, the entire sampling was divided into two groups, one group was subjected to exploratory factor analysis, and the other group was subjected to confirmatory factor analysis. As a result of exploratory factor analysis, 63 questions of 10 factors (work, community, family, others, economic power, self-esteem, leisure, physical health, spirituality, and self-growth) were finally derived, and confirmatory factor analysis using the structural equation model verified that the model fit criteria were met. Convergence validity was verified using the K-MHC-SF and Wellness Index for Workers to verify whether the derived wellness scale and its sub-factors actually measure wellness. As a result of analyzing the relationship between the variables and factors of the Subjective Happiness Scale and Life Scale to verify the validity related to the criteria, it was found to be a significant correlation. As a result of confirming the significance of each path through multiple regression analysis, the 'self-esteem' on the wellness scale was identified as the most important factor influencing subjective happiness and life satisfaction. Finally, discussions on this research process and results, academic significance and practical significance, limitations, and future research directions were presented.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.147-158
• /
• 2015

This study made an approach to the industrial exhibition space, which is a medium of marketing communication, from the position of an enterprise and consumers through the output of Space Design, and conducted it with focus on B2B transactions among specialized exhibitions. In addition, this study inquired into what factors should be considered along with space design by interpreting the purpose of participating in the exhibition and space design of the enterprise which supply capital goods, elements, related technologies and materials, etc. This study aimed at drawing the direct/indirect effect, produced by space design, on the marketing by analyzing correlation between space design and participating enterprises' marketing. Despite the marketing effect of the exhibition, which was proved by preceding research results, the reality is that exhibition-participating expenses work as considerable burden on enterprises. Particularly, booth design, which is forming the most proportion among the participating expenses, was found to have insufficient influence on visitors due to the decline in its importance among diverse factors influencing visitor's decision to visit a booth. Regardless of the business category of participating enterprises in the exhibition, the standard of exhibits was ranked as the most important consideration factor in visiting a booth. Even by business category, the standard of booth design rarely had an influence on booth visit. Booth design had an affirmative influence on participating enterprise's preference, but its influence on product purchase or business talk & contact with a participating enterprise or price was found to be extremely low. It's difficult to judge marketing success or failure of an exhibition by the form and standard of booth design. Preferably, this study infers that it's necessary to put much weight on qualitative excellence of an exhibition, which consists of participation of an enterprise in possession of excellent technologies, exhibits with higher standards and high-quality visitors with purchasing power. This study suggests that it's more effective to set up the plan for expansion of participation in exhibition by optimally regulating the proportion of space design in participating expense to increase marketing effectiveness of an exhibition. The limitations of this study, analysis of which based on the visitors to an exhibition only, requires supplementation through the follow-up research work on participating enterprises in the exhibition.

• Journal of the Korean Association of African Studies
• /
• v.29
• /
• pp.27-53
• /
• 2009

At the start of the new century, South Africa probably had the largest number of HIV-infected people of any country in the world. The only nation that comes close is India with a population of one billion people compared to South Africa's figure of 57 million. The tragedy is that this did not have to happen. South Africa was aware of the dangers posed by AIDS as early as 1985. In 1991, the national survey of women attending antenatal clinics found that only 0.8percent were infected. In 1994, when the new government took power, the figure was still comparatively low at 7.6 %. The 2004 figure which has been published is 26.5%. This article tracks the epidemic globally, in the region and in South Africa. I explain some of the basic concepts around the disease and look at what may happen with respect to numbers. The situation is bad, and the number of people falling ill, dying and leaving families will rise over next few years. This will impact on South Africa in a number of important ways. This article assesses the demographic, economic and social consequences of the epidemic. It disposes of a number of myths and present the real facts. The AIDS in South Africa is not related to individuals only. It warns that AIDS in Africa is becoming a community and systemic problem. The acuteness of the problem does not stem merely from the fact that communities are affected, or could even be wipe out by the end of this decade, but from the fact that AIDS will place incredible burdens and obligations upon medical services, health care and religious communities such as churches. The facts confront churches' mission with the important question: who is going to take care of all the patients and where? The reality is that people dying of AIDS will have to be cared for at home by relatives and friends. A further question that arises is whether our people are prepared for this. AIDS was considered to be a homo-plague and the hunt was on for a scapegoat in the light of the fatal implication of the disease. At present we are in the strategic phase where we all realize that it will be of no avail to scare people with the ominous threat of AIDS AIDS destroys the optimism of our achievement ethics. This exposure of the culture of optimism is also an exposure of the so-called 'human basic fear which accuses Christianity that their concept of sin is a damper on man's search for liberation and basic need to be freed from all Imitation. AIDS is also a test for our ecclesiastical genuineness and the sincerity of our mission sensibility. It poses the question: How unconditional is Christian love? Is there room for the AIDS sufferer in the community of believers, despite the fact he is an acknowledged homosexual? The question to put to the church is whether the community of believers is an exclusive to put to the koinonia which excludes homosexuals. They may be welcome on principle, but in actual fact are not acceptable to the church community. As South Africa enters the new century, it is clear that the epidemic is not having a measurable impact. However, the impact of AIDS is gradual, subtle and incremental. The author's proposal of what is currently most needed in South Africa is that the little things will make a difference. It's about doing lots of little things better at grassroots level, with the emphasis on doing. There are so many community, churches and NGOs initiatives worth building on and intensifying. One must not underestimate the therapeutic value of working together in small groups to overcome a problem

• 한국노년학
• /
• v.39 no.4
• /
• pp.663-677
• /
• 2019

This study was performed to identify the relationship and effects of nursing work environment and role conflict on job embeddedness among nurses working in long-term care hospitals. The data were collected from 200 nurses working in 10 long-term care hospitals from G - province from July to August 2018. Structured questionnaires assessing general characteristics and three major variables were distributed to the study participants and final 190 data set were analyzed using SPSS ver 25.0 program. Study results were as follows; mean score of job embeddedness was 2.98±0.46 out of 5 and the score of sub-domains were in order of fit, links, and sacrifice. The average score of the nursing work environment was 3.14 ± 0.42 and the leadership was the highest sub-domain followed by the working system, the relationship with peers, and the support of the institution. Overall role conflicts score was 3.43 ± 0.51, and environmental disorder, role ambiguity, lack of ability, lack of cooperation were reported in order as sub-domains. Job embeddedness of the study participants showed a statistically significant positive correlation with the nursing work environment and negative correlation with the role conflict. Factors affecting job embeddedness were nursing work environment, age, and role conflict, and the explanatory power of the model was 50.4%. The findings suggest that the overall level of job embeddedness of nurses working in long-term care hospitals is below middle level and efforts to improve job embeddedness through strategies related to nursing work environment and role conflict in organizational level. In addition, the relationship between age and job embeddedness needs to be studied further.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.4
• /
• pp.81-96
• /
• 2023

Objective : This study aimed to examine the association between the structural and functional aspects of social networks and health-promoting behaviors in community-dwelling older adults. Methods : Social networks based on structural and functional aspects and health-promoting behaviors by lifestyle were measured in 226 community-dwelling adults aged 65 years and over. To analyze the collected data, an independent t-test, one-way ANOVA, Pearson's correlation analysis, and hierarchical regression were performed. Results : The network size was the highest in the friend network, and the frequency of contact and social support was the highest in the non-living family network. Health-promoting behaviors were highest for activities of daily living and lowest for productive and social activities. All subfactors of social networks showed significant positive correlations with health-promoting behaviors. Hierarchical regression showed social support from neighbors as the variable with a significant effect on health-promoting behaviors; gender and depression were also influencing factors, and this model showed 37% explanatory power. Conclusion : To promote healthy behaviors of older adultsin the community, the development of health promotion programs and related policies considering social networks centering on social support from neighbors is required.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.