• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• 대한수학회보
• /
• 제33권4호
• /
• pp.603-611
• /
• 1996

Let consider the following problem: find an element u(t) in a Banach space U from the equation $$ x'(t) = Ax(t) + f(t,x(t)) + \Phi_0 u(t), 0 \leq t \leq T $$ with initial and terminal conditions $$ x(0) = 0, x(T) = \phi $$ in a Banach space X where $\phi \in D(A)$. This problem is a kind of control engineering inverse problem and contains nonlinear term, so that it is difficult and interesting. Thee proof main result in this paper is based on the Fredholm property of [1] in section 3. Similar considerations of linear system have been dealt with in many references. Among these literatures, Suzuki[5] introduced this problem for heat equation with unknown spatially-varing conductivity. Nakagiri and Yamamoto[2] considered the identifiability problem, which A is a unknown operator to be identified, where the system is described by a linear retarded functional differential equation. We can also apply to determining the magnitude of the control set for approximate controllability if X is a reflexive space, i.e., we can consider whether a dense subset of X is covered by reachable set in section 4.

• 대한미생물학회지
• /
• 제35권2호
• /
• pp.109-115
• /
• 2000

FtsH is a membrane-bound, ATP-dependent metalloprotease that is involved in a variety of cellular functions including the regulation of responses to heat and stress shock. Previously, we had cloned and sequenced pneumococcal ftsH gene whose deduced amino acid sequence was very similar to those of several gram-positive bacteria and Escherichia coli, except for the N-terminal domain that was responsible for membrane anchoring. In order to better understand the role of Streptococcus pneumoniae FtsH, we expressed pneumococcal ftsH gene in Escherichia coli. When it was expressed from a strong promoter, $P_{tac}$, a considerable amount of the recombinant FtsH was produced, although the prolonged induction resulted in not only accumulation of breakdown products but also ceasing of the further growth of E. coli host. This indicated that the expression of the exogenous ftsH gene was tightly regulated since the excessive FtsH appeared detrimental to bacterial cells. In Western blotting, the pneumococcal FtsH protein, whether native or recombinant, was reactive to anti-E. coli FtsH serum. The observation that FtsH proteins were well conserved throughout the bacterial kingdom and its expression level was fine-tuned suggests an important role for this protein in the stress adaptation which may be related to infecting process by pneumococci.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.221-224
• /
• 2017

This paper dealt with the extraction of series arc signals based on wavelet transform in order to improve the accuracy of arc detection in indoor wiring systems. Three types of arc sources including a cord-cord, a terminal-cord, and an outlet-plug were fabricated to simulate typical arc defects. An arc generator fabricated according to UL 1699 was used to generate arcs. The optimal mother wavelet was selected as bior1.5 by calculating the correlation coefficients between the detected single current pulse and the wavelet. The detected arc current signals were then decomposed into eight levels using the discrete wavelet transform that implements the multi-resolution analysis method. By analyzing the decomposed components, the detail components D6, D7, and D8 were associated with arc signals, which were used for signal reconstruction. From the result, it was verified that the proposed method can be used for the extraction of the series arc signal from the AC mains, which is expected to be applied to further analysis of arc signals in indoor wiring systems.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.19-25
• /
• 2010

Most faults are single-phase-to-ground fault in ungrounded system. The fault currents of single-phase-to-ground are much smaller than detection thresholds of measurement devices, so detecting single-phase-to-ground faults is difficult and important in ungrounded system. The protection coordination method using SGR(Selective Ground Relay) and OVGR(Overvoltage Ground Relay) is generally used in ungrounded system. But this method only detects fault line and it has the possibility of malfunction. This paper proposed to advanced protection coordination method in ungrounded system. The method just using zero-sequence current can detect fault line, fault phase, fault section at terminal device. The general protection method is used to back up protection. In the case study, the proposed method has been testified in demo system by Matlab/Simulink simulations.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.107-110
• /
• 2003

In this article we developed the environment-friendly arrangement system of drainage and irrigation canal. It is divided into the model which considers ecological conservation type, irrigation flood control type and hydrophilic type. In canal plan and design we will consider vertical section and intersection plan, water quality management, waterside environment construction plan, canal terminal treatment, canal bottom plan, etc. Consequently, We propose the detail contents which must be considered when we plan the environmental canal space.

• 한국전자파학회논문지
• /
• 제7권2호
• /
• pp.167-177
• /
• 1996

임의의 이중 ridge 구형도파관의 단면에서 모우드 해석을 적용하여 차단주파수들을 계산 하였다. 그리고 주파수 6~8GHz에서 $TE_{10}$ 모우드에 대한 특성 임피던스를 구하였다. 선형으로 taper된 구형도파관 양단이 단일 및 이중 ridge구형 단면으로 구성되어 있을 경우 $TE_{10}$ 모우드에 대한 등가 비균일 전송선을 수치계산으로 풀었다. 단일 ridge도파관이 있는 종단명에서 들여다 본 입력 임피던스는 광대역에서도 거의 일정한 값을 가짐을 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.262-267
• /
• 2008

Numerical investigations were performed with an external-compression inlet with a three-dimensional bump at Mach 2 to scrutinize the geometrical effects of the bump in controlling the interaction of a shock wave with a boundary layer. The inlet was designed for two oblique shock waves and a terminal normal shock wave followed by a subsonic diffuser, with a circular cross-section throughout. The bump-type inlet that replaced the aft ramp of the conventional ramp-type inlet was optimized with respect to the inlet performance parameters as well as compared with the conventional ramp-type inlet. The current numerical simulations showed that a bump-type inlet can provide an improvement in the total pressure recovery downstream of the shock wave/boundary layer interaction over a conventional ramp-type inlet.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.262-267
• /
• 2008

Numerical investigations were performed with an external-compression inlet with a three-dimensional bump at Mach 2 to scrutinize the geometrical effects of the bump in controlling the interaction of a shock wave with a boundary layer. The inlet was designed for two oblique shock waves and a terminal normal shock wave followed by a subsonic diffuser, with a circular cross-section throughout. The bump-type inlet that replaced the aft ramp of the conventional ramp-type inlet was optimized with respect to the inlet performance parameters as well as compared with the conventional ramp-type inlet. The current numerical simulations showed that a bump-type inlet can provide an improvement in the total pressure recovery downstream of the shock wave/boundary layer interaction over a conventional ramp-type inlet.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.245-248
• /
• 2001

In this paper, we have investigated the design technique and fabricated the surface acoustic wave (SAW) filter for duplexer, which consists of Tx. and Rx. filter, and antenna terminal. For Tx. and Rx. bandpass filters we used the one-port SAW resonators with n-section ladder structure. The structure is composed of couples of series-arm resonators and parallel-arm resonators. RF filter using ladder structure was designed and fabricated on 36$^{\circ}$Y-X LiTaO$_3$ substrates. Designed filters, insertion loss is less than 1.5dB, the bandwidth is more than 25MHz, rejection band level is less than -30dB and center frequency is 820MHz.