• 제목/요약/키워드: tent

검색결과 148건 처리시간 0.028초

Present State of Membrane Structures in Japan

  • Oda, Kenshi
    • 한국공간구조학회지
    • /
    • 제2권2호
    • /
    • pp.11-15
    • /
    • 2002
  • Formerly, it was called a tent and now, it is called membrane structure. If saying a tent, it imagines the tent of Bedouin, Mongolia and North American Indian. It became clear from the excavated wall painting that have been covered with the retractable roof of the canvas on the auditorium at the amphitheater in Pompeii and became a topic. These tents were made of the animal skins or fabric woven with the flax plants, and these tents are still used. However, if saying membrane material at present, it says the one to have applied a coating resin to the textile. Because the base fabric of membrane material is a woven fabric, the relation between the stress and the strain is different to the direction of the weaving thread. Moreover, the tensile force must always occur in the membrane surface. From these reasons, because the membrane structure corresponds to the particular building material and the construction method about the Building Standard Law, it must be examined specially that the membrane structural building have the same or any more safety as the provisions which was set to the Building Standard Law. Therefore, the technical standards about the membrane structural building became indispensable. In the paper, the kinds of the membrane materials, which are used for the membrane structural buildings, and technical standards process of the creating for the membrane structure buildings are introduced. Lastly, some of the soccer stadiums for 2002 FIFA World Cup KOREA/JAPAN which be covered with the roof of the membrane structures are presented.

  • PDF

2차원 Tent-map을 이용한 RFID 인증 프로토콜 설계 (Design of RFID Authentication Protocol Using 2D Tent-map)

  • 임거수
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.425-431
    • /
    • 2020
  • 산업과 기술이 고도화되면서 물류의 운송, 관리, 유통이 대량화되었고 이런 대량의 물류 정보를 효율적으로 관리하기 위해 RFID(Radio-Frequency Identification) 기술이 개발되었다. 관리를 목적으로 하는 RFID는 물류 산업뿐만 아니라 전력전송 및 에너지관리 분야까지 산업 전반에 응용되고 있는 상태이다. 그러나 RFID 장치는 프로그램 개발 용량의 제한으로 개발에 제약을 받고 있고, 이런 제약은 기존의 강인한 암호화 방법을 사용할 수 없어서 보안에 취약함을 가지고 있다. 우리는 이런 RFID의 제약적인 환경에 적용하기 쉬운 단순 연산으로 구현할 수 있는 보안용 혼돈 시스템을 설계하였다. 설계된 시스템은 2차원 Tent-map 혼돈 시스템으로 혼돈계의 매개변수에 따른 신호의 편중 분포 문제점을 해결하기 위해 암호용 매개변수(𝜇1)와 분포용 매개변수(𝜇2)그리고 키값으로 사용될 수 있는 상점 ID 값을 매개변수(𝜃)로 하는 시스템이다. 설계된 RFID 인증 시스템은 난수와 유사하며 초기값으로 재생산이 가능한 혼돈 신호의 특성이 있고 매개변수에 대한 편중 분포 문제를 해결하였기 때문에 기존의 혼돈 시스템을 이용한 암호화 방법보다 효과적이라고 할 수 있다.

On certain maximal operators being $A_1$ weights

  • Suh, Choon-Serk
    • 대한수학회논문집
    • /
    • 제10권4호
    • /
    • pp.881-887
    • /
    • 1995
  • Let f be a measurable function on the unit ball B in $C^n$, then we define a maximal function $M_p(f), 1 \leq p < \infty$, by $$ M_p(f)(\zeta ) = \sup_{\delta > 0}(\frac{1}{\sigma(\beta(\zeta, \delta))} \int_{T(\beta(\zeta, \delta))} $\mid$f(z)$\mid$^p \frac{d\nu(z)}{(1-$\mid$z$\mid$^n})^{1/p} $$ where $\sigma$ denotes the surface area measure on S, the boundary of B, and $T(\beta(\zeta, \delta))$ denotes the tent over the ball $\beta(\zeta, \delta)$. We prove that the maximal operator $M_p$ belongs to the Muckenhoupt class $A_1$.

  • PDF

오버슈트 없는 고속 디지털 전류제어기 설계 (Design of Fast and Overshoot Free Digital Current Controller)

  • 이진우
    • 전력전자학회논문지
    • /
    • 제5권2호
    • /
    • pp.163-169
    • /
    • 2000
  • 전력변환시스템의 경제적인 설계를 위해서는 전력용 반도체소자의 전류정격을 모든 동작조건에서 최대한 이용하는 것이 매우 중요하다. 따라서 본 논문에서는 제안전압 한계의 변화, 연산지연시간, 시스템의 불확실성에 대해서도 오버슈트 없는 고속 전류제어 응답을 얻는 실용적인 디지털 전류제어기의 설계방법을 제안한다. 제안한 전류제어기는 수정된 시간지연보상기와 조건부 적분기를 갖는 고이득 PI제어기로 구성되어 있다. 제시된 시뮬레이션 및 실험 결과는 제안한 방법의 유효성을 보여준다.

  • PDF

유도모터의 저 스위칭 소음 구동을 위한 카오스 2중 텐트사상 RPWM기법 (A Chaotic Double Tent Mapping RPWM Technique for Induction Motor Dives with Low Swiching Noise)

  • 김준형;정영국;임영철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 추계학술대회 논문집
    • /
    • pp.90-95
    • /
    • 2004
  • 본 연구에서는 일반적으로 사용되고 있는 랜덤 수 발생 알고리즘인 LCG(Linear Congruential Generator)대신에 카오스 2중 텐트사상(Tent Mapping)에 의한 저 스위칭 소음 유도모터구동 시스템을 제안하였다. 2중 텐트사상에 의한 랜덤 수 발생을 위해 카오스 발생 영역인 $\lambda=0.99$에서의 2중 텐트사상의 분기도(Bifurcation Diagram)를 사용하였다. 카오스 랜덤수와 3상 기준 정현파는 80C196 마이크로 콘트롤러가 전담하고 있으며, 80C196으로부터 발생된 카오스 랜덤 수에 의하여 MAX038로부터 랜덤 주파수의 삼각파 캐리어가 발생된다. 기계적인 소음이 없는 ECB(Eddy current Brake)를 부하로 사용한 3상 유도모터 구동 장치를 제작하여 본 연구의 타당성을 입증하였다.

  • PDF

A Simple Random Signal Generator Employing Current Mode Switched Capacitor Circuit

  • Yamakawa, Takeshi;Suetake, Noriaki;Miki, Tsutomu;Uchino, Eiji;Eguchi, Akihiro
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.865-868
    • /
    • 1993
  • This paper describes a simple random signal generator employing by CMOS analog technology in current mode. The system is a nonlinear dynamical system described by a difference equation, such as x(t+1) = f(x(t)) , t = 0,1,2, ... , where f($.$) is a nonlinear function of x(f). The tent map is used as a nonlinear function to produce the random signals with the uniform distribution. The prototype is implemented by using transistor array devices fabricated in a mass product line. It can be easily realized on a chip. Uniform randomness of the signal is examined by the serial correlation test and the $\chi$2 test.

  • PDF

동절기 공동주택 갱폼 개구부 천막보양에 따른 보양 온도 분포 분석 (The temperature distributions of the curing space according to blocking the opening of gang-form at the apartment in the cold weather)

  • 조홍범;송진희;김영선;최지수;이규남
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 봄 학술논문 발표대회
    • /
    • pp.140-141
    • /
    • 2022
  • CFD analysis was performed to analyze the temperature distribution of the inner space of the curing house according to blocking the opening of the gang-form with a tent in case of concrete pouring and heat curing of the apartment house during the winter season. If the gang-form opening is closed with a tent during internal heating using a hot air blower in the winter, the internal temperature rises compared to the non-reserved due to air-tightness of the curing spaces, and uniform temperature distribution can be ensured. In addition, it is possible to increase curing efficiency by reducing the amount of heat supplied and shortening the heating time.

  • PDF