• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.4
• /
• pp.177-183
• /
• 2008

The layers of keratinocytes form an acid mantle on the surface of the skin. Herein, we investigated the effects of acidic pH on the membrane current and $[Ca^{2+}]_c$ of human primary keratinocytes from foreskins and human keratinocyte cell line (HaCaT). Acidic extracellular pH ($pH_e{\leq}5.5$) activated outwardly rectifying $Cl^-$ current ($I_{Cl,pH}$) with slow kinetics of voltage-dependent activation. $I_{Cl,pH}$ was potently inhibited by an anion channel blocker 4,4'-diisothiocyanostilbene-2,2'-disulphonic acid (DIDS, 73.5% inhibition at 1${\mu}$M). $I_{Cl,pH}$ became more sensitive to $pH_e$ by raising temperature from $24^{circ}C$ to $37^{circ}C$. HaCaT cells also expressed $Ca^{2+}$-activated $Cl^-$ current ($I_{Cl,Ca}$), and the amplitude of $I_{Cl,Ca}$ was increased by relatively weak acidic $pH_e$ (7.0 and 6.8). Interestingly, the acidic $pH_e$ (5.0) also induced a sharp increase in the intracellular [$Ca^{2+}$] (${\triangle}[Ca^{2+}]_{acid}$) of HaCaT cells. The ${\triangle}[Ca^{2+}]_{acid}$ was independent of extracellular $Ca^{2+}$, and was abolished by the pretreatment with PLC inhibitor, U73122. In primary human keratinocytes, 5 out of 28 tested cells showed ${\triangle}[Ca^{2+}]_{acid}$. In summary, we found $I_{Cl,pH}$ and ${\triangle}[Ca^{2+}]_{acid}$ in human keratinocytes, and these ionic signals might have implication in pathophysiological responses and differentiation of epidermal keratinocytes.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2007

Purpose: As increasing complexity of modern radiotherapy technique, more developing dosimetry is required. Polymer gel dosimeters offer a wide range of potential applications with high resolution and assured quality in the thee-dimensional verification of complex dose distribution such as intensity-modulated radiotherapy (IMRT). The purpose of this study is to find the most sensitive and suitable gel as a dosimeter by varying its composition ratio and its condition such as temperature during manufacturing. Materials and Methods: Each polymer gel with various ratio of composition was irradiated with the same amount of photon beam accordingly. Various polymer gels were analyzed and compared using a dedicated software written in visual C++ which converts TE images to R2 map images. Their sensitivities to the photon beam depending on their composition ratio were investigated. Results: There is no dependence on beam energy nor dose rate, and calibration curve is linear. Conclusion: The polymer gel dosimeter developed by using anti-oxidant in this study proved to be suitable for dosimetry.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.117-122
• /
• 2011

Asphalt concrete pavement can be widely seen on urban streets, highways, parking lots, and bike trails. Asphalt concrete pavement is relatively temperature sensitive materials due to the viscoelastic behavior, which can be defined as flexible performance in summer and rigid performance in winter. In terms of maintenance, it can be fixed quite easily if damaged. In addition, asphalt concrete pavement is generally found to be black and grey in color. However, several colors can be adopted to change the appearance of plain old boring, black and grey. Generally, there are two types of color systems in hot mix asphalt concrete materials. One system uses colored cementitious material that is applied to pavement surface through coating the surface of the asphalt pavement. The major disadvantage to this system requires a careful skill set to be used on the construction site in order to prevent taking off the cementitious material. The other coloring system colors the asphalt hot mixtures through using color additives. The main advantage to this system is that the asphalt pavement layer is colored using the same techniques that are already used in paving. The disadvantage is that the colors are limited to mainly reds and browns. In this study, a suggested color additive was evaluated, based on rutting, moisture sensitivity, and fatigue cracking performance.

• Korean Journal of Microbiology
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2006

Saccharomyces cerevisiae Dna2 helicase/endonuclease plays an essential role in removing DNA primers during Okazaki fragment processing in eukaryotic DNA replication. Genome-wide scale co-immunoprecipitation experiments predicted that Dna2 interacts with a novel protein YHR122W (1). In this study, we observed that overexpression of YHR122W gene suppressed the temperature-sensitive phenotype of $dna2\Delta405N$ mutation. To investigate direct interaction between these two proteins, a histidine-tagged recombinant YHR122W protein was expressed and purified from E. coli. Physical interaction between the purified YHR122W and Dna2 proteins was detected by enzyme-linked immunosorbent assays. Further more, the complex formation was most efficient at physiological salt concentration, 150 mM NaCl. The genetic and physical interactions between YHR122W and Dna2 shown in this study suggest that the biological functions of these two proteins may be closely related each other.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.2
• /
• pp.84-88
• /
• 2016

AlN single crystals were grown by the PT (Physical vapor transport) method with position-changable induction coil. And the graphite crucible dimensioned ${\Phi}90{\times}H120$ was used on processing. The temperature was $1950{\sim}2050^{\circ}C$ and ambient pressure was 150~1 Torr. And the hot-zone was changed according to times on growing for result comparison. When hot-zone by coil is located below far enough (> 40 mm) from AlN crystal concentration position, the as-grown crystals physical size is better ($300{\mu}m/hr$) than another condition, but the condition-reproducibility was very poor. However the closer the distance between hot-zone and AlN growing posion, the smaller the size of as-grown crystal and the rarer the generation of the crystal nuclear, but the crystal growing condition is stable for quality. The best condition for both growth rate and quality is gained when the starting position of hot-zone coil is about 20 mm distance from growing position. For the best growth condition, the position of hot-zone is very sensitive factor and the further more the condition of speed of coil shift also must control.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.9-14
• /
• 2016

The effect of the size and shape of magnesium(Mg) powder on the formation of $MgB_2$ and the critical current density($J_{c,}$) of $MgB_2$ bulk was studied. As a precursor for the formation of $MgB_2$, Mg and $MgB_4$ powder, which was synthesized through the reaction of boron (B) with Mg powders, was used. $MgB_4$ was mixed with Mg powders of various sizes, pressed into pellets and heat-treated at $650^{\circ}C-750^{\circ}C$ in flowing argon gas. The XRD analysis of the heat-treated $MgB_2$ samples showed that the volume fraction of $MgB_2$ was the highest as 92.74 % when spherical Mg powder with an average size of $25.7{\mu}m$ was used, whereas the volume fraction was the lowest as 79.64 % when plate-like Mg powder with a size of $34.1{\mu}m$ was used. The superconducting transition temperature ($T_c$) of $MgB_2$ was not sensitive to the characteristics of the Mg powders used. All of the prepared $MgB_2$ samples showed a high $T_c$ of 38.3 K and a small superconducting transition width of 0.2 K-0.5 K. $J_c$ (5 K and 1 T) of $MgB_2$ was the highest as $3.93{\times}10^4A/cm^2$ when spherical Mg powder with a size of $25.7{\mu}m$ was used, whereas $J_c$ was the lowest as $2.18{\times}10^4A/cm^2$when plate-like Mg powder with a size of $34.1{\mu}m$ was used. The relationship between the $J_c$ of $MgB_2$ and the characteristics of the Mg powders used was explained in terms of the volume fraction of $MgB_2$ and the apparent density of the $MgB_2$ pellets.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.254-261
• /
• 2014

In order to optimize process conditions for manufacturing retorted Kimchi soup by using stationary and rotary types systems were applied for sterilization process. For investigating the differences in heat penetration characteristics during sterilization, Kimchi soup was packed into retort pouches, and sterility ($F_0$ value) at various positions in the product was measured through a wireless $F_0$ sensor. Heat penetration characteristics were significantly affected by sterilization method. From data analysis, optimum ranges of sterilization temperature and time was determined to be $120.7^{\circ}C$, 13 min for rotary type and $120.7^{\circ}C$, 20 min for stationary type. At those conditions, they had similar sterility ($F_0$ value). The results showed that rotation provides faster heat penetration and more uniform sterility than various positions of the product. These results derived a lot of advantages from related industry. For instance, many of the more viscous semi-liquid products and heat sensitive natural products could be sterilized in the lager pouch sizes without overcooking or scorching. Hence, current study suggests that rotary type retort would make it possible not only to reduce processing times as 35~45%, but also to improve the quality of product as overall taste, flavor, color, and texture with significant difference (p<0.05).

• Journal of Radiation Protection and Research
• /
• v.20 no.3
• /
• pp.181-186
• /
• 1995

UV irradiation causes a variety of biologic effects on the skin. These effects can be devided to acute reactuons and chronic reacxtions by duration of UV irradiation. Acute reactions are erythema reaction, pigment reactions and changes in epidermal thickness. Among them erythema reaction is most common and conspicuous acute effects of the skin. Upon exposure to sun or artificial UV soures, a faint redness response of skin may begin. Larger exposure causes sunburn reaction which is exaggerated erythema reactionassociated with pain, swelling, vesicle and dulla. Extent and time course of erythema reaction depend upon several factors including wavelength and dose of UVR, skin conditions likeas skin type, site, color, temperature, humidity and environmental factors. Evaluation of erythema erythema induced by UV irradiation is difficult to quantify. Degree of redness of skin are usually estimated by subjective visual evaluation. The lowest exposure dose required to protuce erythema is called minimal erythema dose (mod). Repeated exposures of UVR result in photaging skin. In this condition we can see wrinkling, skin atrophy, dilated blood vessels and keratoses. In sensitive persons photocarcinogenesis is can Be developed on exposed area of skin. Recently skin canser is increasing now in our country. An effective public education and photopreventive method must be developed.

• Composites Research
• /
• v.29 no.4
• /
• pp.216-222
• /
• 2016

Ring-opening metathesis polymerization of p-dicyclopentadiene (DCPD) can be performed using the tungsten type catalyst. This reaction usually progresses in nitrogen condition, because the catalysts are extremely sensitive in air condition. To solve this problem, DCPD resin with tungsten (W) was cured using hot press after stirring of DCPD A and B liquid in air condition. Mechanical properties of DCPD were improved by reducing microvoid occurrence successfully by using hot press method. It might be because hot press could provide sufficient press on DCPD specimen. Addition of catalyst was not effective for the curing of resin in a short time. During polymerization, pressure and temperature had a great influence on the mechanical properties of DCPD.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.45-49
• /
• 1972

The following are some results obtained from a series of experiments in rotifer culture and its usage for the food of tiny fish fry: 1, Outdoor concrete ponds, each being $16m^2$, were used to culture the rotifers, Brachionus calyciflorus, and Filinia longiseta. Brachionus calyciflorus usually attained the population of about 100 individuals per ml of pond water. Dipterex was usually applied to control Daphni,a and other crustaceans that generally appear and feed on rotifers. A concentration of 0.16 to 0.2 ppm in the pond water was sufficiently effective to control these natural enimies of rotifers. Poultry dung was very effectively used to multiplicate rotifers. The fertilization ratio was about 8 kg each pond with 30cm depth of water. 2. The tiny rotifer, Filinia longiseta attained a very high population density of about 1,000 individuals per ml of pond water, but they were very sensitive to dipterex, and for this aspect future investigation may be needed. 3. In the outdoor ponds, the multiplication of rotifers significantly decreased when the water temperature falls to about $20^{\circ}C$ in autumn. 4. In the laboratory room, unicellular planktonic algae such as Scenedesmus or Chlorella, as the food of rotifers, were collected from the outdoor ponds by dipping them together with water, and were effectively used for the culture of Brachionus calyciflorus. If the planktonic algae are cultured in specially designed containers, the sun-light would be the most effective means as the source of light. 5. Brachionus calyciflorus cultured in the outdoor ponds by the dipterex controlled method was highly efficient to rear the early fry of marble gourami. The dipterex content mixed in the water to control the crustacean emmies of rotifers sieved no harm to the gourami fish fry.