• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.440-447
• /
• 2002

This paper considerated about exact flow volume calculation method from factors having an influence on measurement and introduced in anesthesia ventilator realized spirometry system. System used differential pressure sensing method with factors, that is temperature, pressure, gas density, humidity and mucus etc. System optimized for low power system for mobile system. System composed analog interface part, signal processing part, display part. Analog interface part have differential pressure flow sensor and defferential pressure sensor. Signal processing part have AVR processor for low power system display part use serial port (RS232, SPT). so it display at pc monitor or send to anesthesia ventilator. System is stable by linearizing 2th characteristics of flow-differential pressure, auto correction of sensor. Noise reduced by algorithm with analog filter and digital processing. Small, light, low power system is good at mobile system and applied to patient in emergency or mobile. and, System is useful at anesthesia ventilator by using flow sensor.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.82-87
• /
• 2011

Heat transfer oils are used in applications such as heating systems of chemical plant, refinery heat exchange systems, gas plant process, injection molding systems, and pulp and paper processing. These oils are extremely stable and resistance to thermal and oxidative degradation. In the event of a spill or accidental release of heat transfer oils, it can be ignite easily when there is an ignition source. This paper discusses the flammability and thermal stabilities of new and used oils. The flammability of the oils are assessed by measuring changes in flash point and auto ignition temperature. The thermal stability of oils are evaluated by the thermal screening unit ($TS^u$) and the differential scanning calorimeter (DSC). From the experimental results, it is suggested to give fire hazard characteristics to safe precautions for the proper use and treatment of heat transfer oils.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.5
• /
• pp.185-190
• /
• 2002

Capacitor material utilized in the downsizing passive devices and dynamic random access memory(DRAM) requires the physical and electrical properties at given area such as capacitor thickness reduction, relative dielectric constant increase, low leakage current and thermal stability. Common capacitor materials, $SiO_2$, $Si_3N_4$, $SiO_2$/$Si_3N_4$,TaN and et al., used until recently have reached their physical limits in their application to several hundred angstrom scale capacitor. $Ta_2O_{5}$ is known to be a good alternative to the existing materials for the capacitor application because of its high dielectric constant (25 ~35), low leakage current and high breakdown strength. Despite the numerous investigations of $Ta_2O_{5}$ material, there have little been established the clear understanding of the annealing effect on capacitance characteristic and conduction mechanism, design and fabrication for $Ta_2O_{5}$ film capacitor. This study presents the structure-property relationship of reactive-sputtered $Ta_2O_{5}$ MIM capacitor structure processed by annealing in a vacuum. X-ray diffraction patterns skewed the existence of amorphous phase in as-deposited condition and the formation of preferentially oriented-$Ta_2O_{5}$ in 670, $700^{\circ}C$ annealing. On 670, $700^{\circ}C$ annealing under the vacuum, the leakage current decrease and the enhanced temperature-capacitance characteristic stability. and the leakage current behavior is stable irrespective of applied electric field. The results states that keeping $Ta_2O_{5}$ annealed at vacuum gives rise to improvement of electrical characteristics in the capacitor by reducing oxygen-vacancy and the broken bond between Ta and O.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.32-35
• /
• 2008

Thermally stable diffusion barrier of tungsten carbon nitride(W-C-N) and of tungsten boron carbon nitride(W-B-C-N) thin films have studied to investigate the impurity behaviors of boron and nitrogen. In this paper we newly deposited tungsten boron carbon nitride(W-B-C-N) thin film for various $W_2B$ target power on silicon substrate. The impurities of the 100nm-thick W-C-N and W-B-C-N thin films provide stuffing effect for preventing the inter-diffusion between W-C-N or W-B-C-N thin films and silicon during the high temperature($700^{\circ}C{\sim}1000^{\circ}C$) annealing process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.453-459
• /
• 2004

An axially staged combustor equipped with an LPP combustion system and CMC liner walls has been investigated for stable combustion and low NOx emissions for the ESPR project. Several fuel injectors were designed and manufactured for the LPP burner, and single sector combustor tests were conducted to evaluate fundamental combustion characteristics such as emissions, instabilities, auto-ignition, and flash back at typical operating conditions from idle to Mn 2.2 cruise. The latest test results showed that the LPP burner had a good potential for the low NOx target. It was also found that the NOx emission level was greatly affected by a distortion in the air flow velocity field upstream of the LPP burner due to the diffuser and fuel feed arm. The CMC material was investigated to apply for the high temperature and low NOx combustor. Annular combustor liner walls were manufactured with the CMC material, and they have been tested at low pressure conditions to evaluate the soundness of the material and the mounting and seal system. This paper reports the latest research activities on the LPP combustion system and CMC liner walls for the ESPR project.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.19-37
• /
• 1995

A fine oil -in-water (O/W) emulsion using non-aqueous emulsification technique was developed. And the behaviors of POE(25)octyldodecyl ether in non-aqueous polyol/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecy1 ether hardly existed as the micelle in the non-aqueous polyol system while, in water, it formed micelles very easily. So, when a polyol, like glycerine in which POE(25)octyldodecyl ether has a poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25)octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0$^{\circ}C$, 25$^{\circ}C$, 40$^{\circ}C$, 50 $^{\circ}C$ and freeze-thaw cycle chamber for a month, while a conventional emulsion system was unstable. It is concluded that, by pertinent combination of polyols, we can improve the adsorption efficiency of surfactant.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.403-409
• /
• 2015

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructure and diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and the diffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific lattice relationship. The modulated structure may be induced by short distance slip or atom movement during a very short interval of solution treated and quenched (STQ) materials. The athermal ${\omega}$ phase, which could be precipitated at low temperature aging, is also analysed by the metastable phase. The metastable phases including athermal ${\omega}$ phase had a common characteristic of hardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atom movement at the metastable state.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.107-113
• /
• 1997

A strain producing a high amount of chitinase was isolated from soil, identified as Pseudomonas sp., and tentatively named Pseudomonas sp. YHS-A2. An extracellular chitinase of Pseudomonas sp. YHS-A2 was purified according to the procedure of ammonium sulfate saturation, affinity adsorption, Sephadex G-100 gel filtration and Phenyl-sepharose CL-4B hydrophobic interaction column chromatography. The molecular weight of the purified enzyme was estimated to be 55 kDa on SDS-PAGE was confirmed by active staining. Optimal pH and temperature of the enzyme are pH 7.0 and $50^{\circ}C$, respectively, and the enzyme is stable between pH 5.0 and 8.0 and below $50^{\circ}C$. The main products of colloidal chitin by the chitinase were N-acetyl-D-glucosamine and N,N'-diacetylchitobiose both of which were detected by HPLC analysis. The enzyme is supposed to be a random-type endochitinase which can degrade any position of ${\beta}$-l,4-linkages of chitin and chitooligosaccharides. The chitinase inhibited the growth of some phytopathogenic fungi, Fusarium oxysporum, Botrytis cineria, and Mucor rouxii and these antifungal effects were thought to be due to the characteristics of endochitinase.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.26-33
• /
• 2014

We examined the characteristics of $NO_x$ emission for CH4/air non-premixed flames using the exhaust gas recirculation(EGR) methods, which are the air-induced EGR(AI-EGR) and fuel-induced EGR(FI-EGR) methods. Our experimental results show that the $NO_x$ emission index($EI_{NOx}$) decreased with increasing EGR ratio. In the range needed to form a stable flame, the reduction rate of $EI_{NOx}$ for the FI-EGR method was approximately 29% when the EGR ratio was 20%, and the reduction rate for the AI-EGR method was approximately 28% with 25% of the EGR ratio. According to the flame structure based on numerical results, high temperature regions for the FI-EGR method were narrower and lower than those for the AI-EGR method at the same EGR ratio. Furthermore, based on the experimental results for swirl flames, the reduction rate of $EI_{NOx}$ for the FI-EGR method was approximately 49% with 15% of the EGR ratio, while the maximum reduction rate for AI-EGR method was approximately 45% with 25% of the EGR ratio. Consequently, we verified that the FI-EGR method was more effective than the AI-EGR method in reducing $NO_x$ emission for non-premixed flames with EGR. We expect that the results of this study will provide fundamental information relating to hybrid combustion systems, which can be used in the design of combustion systems in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.964-968
• /
• 2001

It was carried out for research and development of natural antimicrobial on Scutellariae Radix extract against food-borne infection bacteria .Scutellariae Radix extract showed remarkable antimicrobial activites against Bacillus cereus, Listeria monocytogenes, Escherichia coli, and Vivro parahaemolyticus when examined by disk method, it was very stable on the wide rane of temperature and pH,.The growth rates of Bacillus cereus, Listeria monocytogenes, Escherichia coli, and Vivro parahaemolyticus were decreased at the concentration of more than 500 ppm Scutellariae Radix extract, Indicating that the minimum inhibitory concentration (MIC)of the Bacillus cereus, Listeria monocytogenes, Escherichia coli, and Vivro parahaemolyticus to Scutellariae Radix extract were around 500 ppm . The morphological changes were observed by transmission electron microscope and scanning electron microscope and the microbial cells membran was destroyed by Scutellariae Radix extract. It was identified that the membrane integrity of the sensitive cells was disrupted by exposure to Scutellariae Radix extract as the $\beta$-galactosidase test on experimental substrate ONPG(o-nitrophenyl-$\beta$-D-galacto-pyranoside)