• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.3
• /
• pp.321-328
• /
• 1990

The effect of a small discharge on the A.C (60Hz) breakdown characteristics in SF6 gas has been studied. Various experiments were investigated while varying distance of the rod-plane electrode, the gas pressure, and the magnitude of the small discharge current. Also, the position of the discharge path was observed for the purpose of evident investigation. As the results of this study, authors clarified the shifting mechanism of the position of discharge path with the ratio Rn (E/N distribution at a certain higher tempera-ture due to the small discharge current to E/N distribution at room temperature, E:electric field strength, N:particle number density). Also, the reason for the reduction of the A.C. breakdown voltage was investigated in the presence of a small discharge current.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.510-515
• /
• 1994

Yttria-stabilized zirconia(YSZ) films were prepared onto p-type (100) silicon wafer by a plasma-enhanced metallorganic chemical vapor deposition(PE MO CVD) processing involving the application of vapor mixture of tri(2.2.6.6-tetramethyl-3, 5-heptanate) yttrium$[Y(DPM)_3]$, zirconiumtriflouracethyla cetonate$(Zr(tfacac)_4$ and oxygen gas. The x-ray diffraction(XRD) and fourier transform infrared spectra(FT1R) results showed that the deposited YSZ films had a single cubic phase. $Y_2O_3$ content of YSZ film was analyzed by PIXE(partic1e induced x-ray emission). The experimental results by PIXE revealed that 12.lmol%, 20.4mol% and 31.6mol% $Y_2O_3$ could be obtained as the $Y(DPM)_3$ bubbling temperature varied at $160^{\circ}C, 165^{\circ}C$ and $170^{\circ}C$ respectively. The increase of $Y(DPM)_3$ bubbling temperature caused shifting flat band voltage to have a negative value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.163-174
• /
• 2009

Mechanical device using the load cell or strain gage sensor can be influenced by tempearute changes because temperature change can cause a shift in the load cell or straing gage output at zero loading. In this paper, micro cone penetrometers with 1~7mm in diameter, are developed by using an optical fiber sensor (FBG: Fiber Bragg Grating) to compensate the continous temperature change during cone penetration test. Note the temperature compensated method using optical fiber sensor which has hair-size in diameter, and is not affected by environmental conditions because the measured data is the wavelength shifting of the light instead of the intensity of the electric voltage. Temperature effect test shows that the output voltage of strain gage changes and increases with an increase in the temperature. A developed FBG cone penetrometer, however, achieves excellent temperature compensation during penetration, and produces continuous change of underground temperature. In addition, the temperature compensated FBG cone shows the excellent sensitivity and detects the interface of the layered soils with higher resolution. This study demonstrates that the fiber optic sensor renders the possibility of the ultra small size cone and the new fiber optic cone may produce more reliable temperature compensated tip resistance.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.443-449
• /
• 1999

Bacillus subtilis BK-17 which produces a novel protease with fibrinolytic activity was isolated from soybean paste. Bioreactor production of the enzyme was studied in order to optimize fermentation conditions such as medium concentration, pH, agitation speed, and temperature. Under most cultural conditions, enzyme production initially began when the cell growth stopped. The onset of the enzyme production was indicated by rapid increase in both dissolved oxygen (DO) and pH. Two- to three-times more concentrated medium than the flask optimum medium yielded higher enzyme production in the bioreactor fermentation. When the medium pH was controlled constant, pH 6.5 exhibited the highest activity in the range of 6.0 to 7.5, but the activity was similar to the case when the pH was initially adjusted to 7.5 and subsequently maintained within a relatively wide range of 6.4 to 7.8. Agitation speed did not affect the enzyme production with an exception of DO reaching zero. Fermentation time was reduced when temperature increased within the range of $25^{\circ}C$ to$37^{\circ}C$. However, the highest activity, along with the slow decrease of the enzymatic activity after reaching the maximum value, was observed at $25^{\circ}C$. By shifting the temperature from $37^{\circ}C$ to $25^{\circ}C$immediately after DO reached the minimum level, the high enzyme production of 1,100 U/ml along with the short fermentation period of 13 h could be obtained.

• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.315-324
• /
• 2001

Tobacco (Nicotiana tabacum cvs.Xanthi-nc and NC 82) plants infected with Tobacco mosaic virus (TMV) were examined ultrastructurally. Local lesions produced by TMV were sunken and withered. The plants were subjected to temperature shift (TS), a method to produce programmed cell death (PCD), by placing the infected plants initially at high temperature (35$^{\circ}C$) for 2 days and then shifting them to greenhouse temperature (22-27$^{\circ}C$). As a result, expanded lesions around the original necrotic lesions were produced. The expanded area initially had no symptoms, but it withered and became necrotic 15 h after TS. No ultrastructural changes related to PCD were noted at 0 h after TS in Xanthi-nc tobacco tissues as well as in healthy and susceptible tobacco tissues infected with TMV, At 6 h after TS, chloroplasts were convoluted and cytoplasm began to be depleted; however no necrotic cells were found. At 17 h after TS, ground cytoplasm of affected cells was completely depleted and chloroplasts were stacked together with bent cell wall or dispersed in the intracellular space. Necrotic cells were also observed, containing virus particles in the necrotic cytoplasm. There were initially two types of symptoms in the expanded lesions: chlorosis and non-chlorosis (green). Abundant TMV particles and X-bodies were only found in the chlorotic tissue areas. These results suggest that PCD by TMV infection may start with the wilting of cells and tissues before necrotic lesion formation.

• 한국해양학회지
• /
• v.19 no.1
• /
• pp.11-17
• /
• 1984

The abnormal cooling phenomenon occurred in the coastal areas of East Sea of Korea in summer, 1981 is studied on the basis of the oceanographical data obtained by the National Fisheries University of Pusan, in July, 1981 and by Fisheries Research and Development Agency of Korea during 1961 to 1981 and by Japan Meteorological Agency in 1975 and 1981. Th vertical section of temperature along 130 E showed that the warmer waters more than 10 C occupied at upper layer of about 75m depth in south of 35 30'N the layer changed rapidly thinner as 20m th 30m depth. In the areas of East Sea during 1966 to 1981, the temperature fluctuations at 100m depth ranged greatly in standard deviation from 2 C to 4 C. The temperature anomaly in 1981 was about 1.5 times of the standard deviation and at the upper layer of 150m depth the temperatures became colder by 5 -10 C than average values in August, 1961-1975. The 10 C isotherm at 100m depth in 1981 appeared between 35 and 36 N, shifting southward 20 to 120 miles than mean year. These results showed that the abnormal cooling phenomenon in the areas of East Sea of Korea in summer occurred mose predominantly in 1981 in period from 1966 to 1981

• Macromolecular Research
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2002

Cure behavior of an epoxy resin was investigated at different cure temperatures (110, 120, 130, 140, and 150 $^{\circ}C$) and cure times in the presence of 2 wt% of an N-benzylpyrazinium hexafluoroantimonate (BPH) cationic catalyst by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The glass transition temperature ( $T_{g}$) and chemical conversion (x) at the different temperatures were determined from DSC thermograms. The $T_{g}$ and x vs. In time data were superposed up to $T_{g}$ = 10$0^{\circ}C$ and x = 0.70 by shifting horizontally at a reference temperature of $T_{g}$ = 13$0^{\circ}C$. It is interesting that the $T_{g}$ and x of the superposed data increase rather slowly in the early stage of cure and rapidly thereafter. Therefore, the increase of the $T_{g}$ and x can be divided into two regions; $R_{I}$= -18.4(= $T_{go}$ ) ~5$^{\circ}C$ and $R_{II}$ = 5 ~ 10$0^{\circ}C$ in $T_{g}$, and $R_{I}$ : 0~0.24 and $R_{II}$ : 0.24~0.70 in x. The $R_{I}$ is closely related to the initiation reactions between BPH and epoxy and between hydroxy group and epoxy in this epoxy/catalyst system. From the kinetic analysis of the $T_{g}$-shift, activation energy was 12.5 kcal/mol. The relationship between $T_{g}$ and x was also considered. The gelation and vitrification times for different cure temperatures were obtained from DMA curves.urves. DMA curves.urves.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.122-132
• /
• 2010

Higher strength and fracture toughness of reactor pressure vessel steels can be obtained by changing the material specification from that of Mn-Mo-Ni low alloy steel (SA508 Gr.3) to Ni-Mo-Cr low alloy steel (SA508 Gr.4N). However, the operation temperature of the reactor pressure vessel is more than $300^{\circ}C$ and the reactor operates for over 40 years. Therefore, we need to have phase stability in the high temperature range in order to apply the SA508 Gr.4N low alloy steel for a reactor pressure vessel. It is very important to evaluate the temper embrittlement phenomena of SA508 Gr.4N for an RPV application. In this study, we have performed a Charpy impact test and tensile test of SA508 Gr.4N low alloy steel with changing impurity element contents such as Mn and P. And also, the mechanical properties of these low alloy steels after longterm heat treatment ($450^{\circ}C$, 2000hr) are evaluated. Further, evaluation of the temper embrittlement by fracture analysis was carried out. Temper embrittlement occurs in KL4-Ref and KL4-P, which show a decrease of the elongation and a shifting of the transition curve toward high temperature. The reason for the temper embrittlement is the grain boundary segregation of the impurity element P and the alloying element Ni. However, KL4-Ref shows temper embrittlement phenomena despite the same contents of P and Ni compared with SC-KL4. This result may be caused by the Mn contents. In addition, the behavior of embrittlement is not largely affected by the formation of $M_3P$ phosphide or the coarsening of Cr carbides.

• Microbiology and Biotechnology Letters
• /
• v.11 no.3
• /
• pp.233-239
• /
• 1983

Bacillus thuringiensis was mutagenized with UV light irradiation and nitrosoguanidine. Twenty-four tem perature-sensitive ts mutants were isolated at 42$^{\circ}C$ and classified into two groups by growth on nutrient agar at 42$^{\circ}C$. First is the lethal group, which did not grow at the nonpermissive temperature, the second is the reduced group whose growth was restricted from one-half to one-fourth, Thirteen ts mutants belong to the lethal group and eleven ts mutants belong to the reduced group. Auxotrophic mutant, A-N28 required five amino acids as growth factors, A-N65 also five amino acids, A-N92 seven, A-N115 four and A-N156 three. Bacillus thuringiensis wild type is resistant to penicillin, ampicillin, and cephalothin. The ts-Ul7l, A-N92 and A-Nl15 are sensitive to the three antibiotics. The ts -U601, -U603, -U604 and -Ul71 did not grow at the permissive temperature after temperature-shifting from 42$^{\circ}C$. Four auxotrophic mutants (A-N38, A-N65, A-N92 and A-Nl15) did not form spores in their cells.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.166-171
• /
• 2017

For high-quality colored rice production, the cultivation environment is a critical factor. The major environmental factor is temperature, which includes the accumulated and average temperature during vegetative and reproductive stages. Generally, during the cultivation period, the temperature can be controlled by shifting the transplanting date. This study was carried out to determine the optimum transplanting date for high-quality red-colored rice production. Four red-colored rice varieties (Jeokjinju, Jeokjinjuchal, Hongjinju, and Gunganghongmi) were used as test materials. The transplanting dates were May 20 and June 5, 20, and 30 in 2015~2016. The most variable factor controlled by the transplanting date was the grain filling rate. The varieties transplanted on June 30 showed low yields owing to the decrease in the grain filling rate. In contrast, the polyphenol content increased with increasing delay in the transplanting date. Collectively, these two results indicate that the optimum transplanting date was June 20. The average temperature for 30 days after the heading date (30DAH) highly affected the polyphenol content. A lower temperature during the 30DAH induced higher polyphenol contents but also caused low yield. The optimum 30DAH temperature for obtaining a higher yield and polyphenol content was $22{\sim}23^{\circ}C$. Using the average 30DAH and accumulated temperatures, the optimum transplanting date was calculated as June 18 to 24 in Miryang region. The optimum transplanting date of Kyeungsangnamdo region was approximately mid-June to early July, and that of Kyeungsangbukdo region was approximately early to mid-June.