• Journal of the Korean Society of Food Culture
• /
• v.11 no.5
• /
• pp.711-719
• /
• 1996

Fermentation characteristics of kwahaju (a typical Korean traditional alcoholic beverage) base were investigated during fermentation with different contents of nuruk (Korean-style bran koji) extract. The nuruk extract which was prepared by incubating the mixture of nuruk powder and water at $25^{\circ}C$ overnight and by filtering it was used to be 0.6%, 2.7%, 5% and 10% (v/v). Total and reducing sugar contents as well as acidity of the kwahaju base with 0.6% nuruk extract were higher than those with 2.7%, 5% and 10% at the fermentation end. Final pH values of all the base samples were ranged from 3.3 to 4.1. Alcohol concentrations of the base samples with 2.7%, 5% and 10% nuruk extract were higher than those with 0.6%. Microbial growth rate was great and inner temperature was high in the sample with high content of nuruk extract, but fermentation period was short. Total sugar consumption and alcohol production increased as the content of nuruk extract increased, but total acid production decreased. The base sample with 10% nuruk extract showed the most excellent fermentation efficiency. Fusel oil content of the base sample with 2.7% nuruk extract was the highest (457.3 ppm), and those wity 5% and 10% nuruk extract were 438.9 ppm and 442.6 ppm, respectively. The sample with 0.6% nuruk extract had the lowest content (409.5 ppm). Sensory evaluation of both the kwahaju base and kwahaju mix with 25% and 40% alcohol by adding soju (Korean distilled liquor) showed that the base with 2.7% nuruk extract had the highest score, and that the kwahaju mix with 25% alcohol had higher score than that with 40%. The sensory results on overall desirability were consistent to those on color and alcohol concentration, and it turned out that the two factors were important to make kwahaju.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.43-48
• /
• 2018

An etchant capable of forming a circuit in an FTO film that can replace ITO, which depends on full imports, was prepared. The etching solution is composed of 1 to 30% by weight of fluoride, 1 to 20% by weight of acid, 0.5 to 5% by weight of surfactant, 5 to 20% by weight of solvent, 0.5 to 10% by weight of corrosion inhibitor and the balance of water. This etchant can be etched using a dry film, thereby reducing the cost, and is free from bubbles and residue of the etchant. The characteristics of the etchant were etched in a time of 2 minute with a 100 nm thick FTO, and the etchant temperature was maintained at $50^{\circ}C$. An undercut of -0.00364% was obtained when put into a 2 minute etching solution. No harmful substances such as Cd, Pb, Hg and Cr components were measured. The use of FTO in Korea where rare earths do not exist can achieve localization and import substitution effect.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.145-162
• /
• 2019

This study aimed to increase the sugar and ethanol yield from the mengkuang plant biomass through biological and liquid hot water (LHW) pretreatment and their combination. The results showed that biological pretreatments with 5% inoculum of the fungus Trametes versicolor resulted in the highest alpha cellulose content incubated for 30 days, and 10% inoculum resulted in the lowest lignin content. LHW pretreatment decreased the hemicellulose content of pulps from 10.17% to 9.99%. T. versicolor altered the structure of the mengkuang pulp by degrading the lignin and lignocellulose matrix. The resulting delignification and cellulose degradation facilitate the hydrolysis of cellulose into sugars. The alpha cellulose content after biological-LHW pretreatment was higher (78.99%) compared to LHW-biological pretreatment (76.85%). Scanning electron microscopy analysis showed that biological-LHW combinated treatment degrades the cell wall structures. The ethanol yield for biological-LHW pretreated sample was observed 43.86% (13.11 g/L ethanol by weight of the substrate, which is much higher than that of LHW-biological pretreatment (34.02%; 9.097 g/L). The highest reducing sugar content about 45.10% was observed with a resulting ethanol content of 15.5 g/L at LHW pretreatment temperature of $180^{\circ}C$ for 30 min.

• Fashion & Textile Research Journal
• /
• v.21 no.5
• /
• pp.606-617
• /
• 2019

The present study newly developed a firefighters' protective jacket and pants using a Nomex honeycomb structured layer (HPC) in cases of being exposed to flashover or flameover. This study evaluated the protective and comfort functions of an HPC compared to the current KFI firefighters' protective clothing (FPC). The results are as follows. First, thermal protective performance (TPP) of fabric layers was 2.75 times greater for HPC than FPC at $125kW/m^2$. Second, the predicted second and third degree burn areas were smaller for HPC than FPC when using a flame manikin. Third, thermal insulation using a thermal manikin was 0.2 clo greater for HPC than FPC. Fourth, there were no marked differences in maximal performance, mobility, and microclimate temperature/humidity between FPC and HPC through human wear trials. The thermal insulation of HPC was higher than that of FPC; however, any negative effect of HPC thermal insulation on the comfort functions for firefighters was not found. In conclusion, the newly-developed HPC provided more protection in reducing burn injuries from $125kW/m^2$, while no negative impact on maximal performance, mobility and thermal comfort functions of firefighters, which is appropriate for quick-evasive tactics at the flashover, flameover or back draft fires.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.2
• /
• pp.49-57
• /
• 2019

The street trees increase the liveability of cities by reducing stormwater runoff, improving air quality, storing carbon, providing shade, and ameliorating the urban heat-island effect. In this study, the health status of street trees in Suwon was evaluated, and the factors affecting the growth of the trees were also derived. In order to evaluate the growth and health of street trees, field survey was carried out on a total of 125 trees in 25 sections of the Deogyeong-daero where is through the city. During the field survey, the following items were examined: Street trees health status (i.e. species, height, DBH (diameter at breast height), planting types, vigor, etc.), soil factors (i.e. soil temperature, humidity, pH, hardness, etc.), and environmental factors (i.e. landuse, road width, etc.). As the results of field survey, the main species of the street trees was Zelkova serrata, which was healthy in most of the sections. The factors such as planting types, soil temperatures, tree root cover, road extension, distance from the road were derived to affect the growth and health of street trees, and the differences were significant. The results of this study were derived the following conclusions for vigorous street trees: First, it is important to install and maintain the protection facilities like tree root cover for the growth of trees. Second, it is necessary to discuss how to plant multiple trees in narrow spaces like a street green space. Third, it is important to provide appropriate soil conditions continuously for growth of threes. Finally, it should be utilized as a mitigation measure of urban heat island effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.801-811
• /
• 2021

Lightning can deliver large amounts of energy to the aircraft in a short period of time, resulting in catastrophic consequence. In particular, lightning strikes accompanied by high temperature heat and current can damage aircraft surface and internal electronic equipment, seriously affecting flight safety. Lightning experiments to analyze this effect use a Component A waveform with a maximum current of 200 kA as specified in SAE ARP 5412B. However, the actual lightning occurs mostly below 35kA and lightning indirect tests are conducted by reducing waveforms to prevent damage to internal electronic equipment. In this study, we examine previous methods to plot the Component A reduced waveform and identify their limitations. We then propose a new method to plot the reduced waveform based on adjusting the correction factor of the aircraft lightning Component A waveform. Finally, the electromagnetic analysis software EMA3D was used to compare the internal induced current size reduction ratio of the internal cable harness of the EC-155B helicopter.

• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.241-250
• /
• 2021

This investigation assessed the berry quality after two months of low-temperature storage (3 ± 1℃) of 'Shine Muscat' grapes, which were treated with CPPU (N-[2-chloro-4-pyridyl]-N'-phenylurea) or TDZ (1-phenyl-3-[1,2,3-thiadiazol-5-yl] urea) in combination with gibbrellic acid (GA₃). The berry shatter rate was the lowest (1%) in 4 cm + CPPU treatment, while it was the highest (2.4%) in 3 cm floral length treated with CPPU. On the other hand, the 4 cm + TDZ treatment resulted in a shatter rate of 2.0%, which was twice as high as that observed after 4 cm + CPPU treatment. The 4 cm + TDZ treatment resulted in a 5.5% berry decay rate, which was the highest among all treatments. Alternatives to using a sulfur dioxide (SD) pad to maintain the quality of 'Shine Muscat' grapes, namely, using ethylene scrubbers (ESs, 3 g × 2 sachet) and alcohol releasers (ARs, 2 g × 2 sachet) in a 2 kg carton package for export, were explored in this study. The berry shatter rate with ES treatment (1.0%) was found to be comparable to that with SD treatment (0.6%) during three months of cold storage. Regarding the berry decay rate, that of the untreated control surged to 36.0% in the three months of storage, followed by 19.9% and 15.5% in samples subjected to AR and ES treatments respectively. Compared with the untreated control, the samples subjected to SD treatment showed a decay rate of 2.2%, which was the most effective in reducing berry decay by 95%. These results demonstrated that SD pad treatment of 'Shine Muscat' grapes was the most effective method of maintaining berry quality, and ES treatment partially reduced the berry shatter and berry decay rates.

• Journal of Powder Materials
• /
• v.28 no.1
• /
• pp.31-37
• /
• 2021

This study explores reducing the oxygen content of a commercial Ti-48Al-2Cr-2Nb powder to less than 400 ppm by deoxidation in the solid state (DOSS) using Ca vapor, and investigates the effect of Ca vapor on the surface chemical state. As the deoxidation temperature increases, the oxygen concentration of the Ti-48Al-2Cr-2Nb powder decreases, achieving a low value of 745 ppm at 1100℃. When the deoxidation time is increased to 2 h, the oxygen concentration decreases to 320ppm at 1100℃, and the oxygen reduction rate is approximately 78% compared to that of the raw material. The deoxidized Ti-48Al-2Cr-2nb powder maintains a spherical shape, but the surface shape changes slightly owing to the reaction of Ca and Al. The oxidation state of Ti and Al on the surface of the Ti-48Al-2Cr-2Nb powder corresponds to a mixture of TiO2 and Al2O3. As a result, the peaks of metallic Ti and Ti suboxide intensify as TiO2 and Al2O3 in the surface oxide layer are reduced by Ca vapor deposition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.42-54
• /
• 2021

The Aft-deck is being applied to the latest unmanned aircraft for the purpose of shielding the gas turbine exhaust plume or spreading jets to increase the mixing rate with the ambient air, thereby reducing the temperature of exhaust gases. In this study, we would like to find out how the performance of the nozzle is affected by the design variables of the Aft-deck. The design variables of aft-deck are selected as length, expansion angle and upper deck shape. The correlation between thrust and plume shielding rate with the length variable is presented. And the correlation between the thrust and the jet diffusion range is presented according to the expansion angle. In addition, the thrust increase effect is confirmed by the removal of the upper deck and the characteristics of transverse velocity vector determined mixing performance with external flow.

• Journal of People, Plants, and Environment
• /
• v.23 no.4
• /
• pp.455-464
• /
• 2020

Background and objective: This study was conducted to examine changes in the composition and physiological activity of Gardenia Fructus after being roasted. Methods: The antioxidant, anti-inflammatory and antibacterial activity of Gardenia Fructus was evaluated using the Gardenia Fructus (GF) and roasted Gardenia Fructus (RGF) ethanol extracts, and their components were analyzed through HPLC. Results: As a result, it was confirmed that the content of gardenoside and geniposide decreased and the content of genipin increased when GF was roasted. The total content of polyphenols was 54.5 ± 2.18 mg gallic acid equivalents (GAE) per gram of the GF extract and 69.6 ± 0.36 mg GAE per gram of the RGF extract. As a result of evaluating 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, both the GF and RGF extracts showed the similar activity to ascorbic acid at the concentrations of 1 mg/mL or higher. In RAW 264.7 macrophages stimulated by lipopolysaccharides (LPS), the RGF extract showed a higher effect of reducing NO production, and significantly reduced the expression of an inflammatory cytokine, IL-6. As a result of evaluating the antimicrobial activity, the RGF extract showed higher antimicrobial activity against Escherichia coli and Bacillus subtilis. In the dextran sulfate sodium salt (DSS) induced inflammatory bowel disease mouse model, the RGF extract reduced the weight of the spleen, and both the GF and RGF extracts reduced the number of bacteria in the colon. Conclusion: Therefore, it has been confirmed through this study that roasting at a high temperature changes the main components of the GF extract and increases its biological activity. The RGF extract is expected to be used as a natural material with antioxidant, anti-inflammatory and antibacterial effects.