• 제목/요약/키워드: temperature calibration

검색결과 516건 처리시간 0.027초

Flight Model Development of the MIRIS, the Main Payload of STSAT-3

  • 한원용;이대희;박영식;정웅섭;문봉곤;박귀종;박성준;표정현;이덕행;남욱원;박장현;선광일;양순철;박종오;이승우;이명목
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.65.1-65.1
    • /
    • 2012
  • MIRIS (Multipurpose Infra-Red Imaging System) is the first Korean Infrared Space Telescope developed by KASI (Korea Astronomy and Space Science Institute), and is the main payload of STSAT-3 (Science and Technology Satellite-3). The FM (fight model) of MIRIS has been recently completed, and various performance tests have been made to measure system parameters such as readout noise, system gain, linearity, and dark current. Final thermal-vacumm test of the MIRIS and the vibration test of the electronics box have been performed. Band response tests showed good agreement with the initial design requirements. No significant dark difference was measured within the expected temperature variation range during observation in orbit. Using Pa-alpha band from a uniform source, the readout noise and system gain were measured by mean variance test. To obtain uniform flat image, flat fielding tests were made for each band, and the data will be compared to that obtained in orbit for calibration. The final version of MIRIS FM will be delivered in March, and it will be integrated into the satellite system for the AIT (Assembly Integration, Test) procedure. The launch of MIRIS is expected in November 2012.

  • PDF

CCD 카메라를 이용한 열화상 실시간 추정과 화재경보 (Thermal Image Real-time estimation and Fire Alarm by using a CCD Camera)

  • 백동현
    • 한국화재소방학회논문지
    • /
    • 제30권6호
    • /
    • pp.92-98
    • /
    • 2016
  • 본 논문은 Charge-Coupled Device (CCD) 카메라를 이용한 열화상의 실시간 추정과 화재경보에 대하여 논한 것으로 각도 및 위치에 따른 특징점 분석과 동일 형상의 벡터 성분 좌표점 설정에 따른 이미지 융합이 잘 되었다. 영상을 Display하는 픽셀의 데이터 값은 0~255, 센서 출력값은 0~5,000로 하여 정확성이 높았다. 시험결과 시험체로부터 500 m, 1000 m, 1500 m 거리에서 화염에 의한 시험체의 작동시간은 각각 7초, 26초, 62초 소요 되었고 화면이미지 생성이 효과적으로 이루어졌다. 화재 발생 진단은 주의/경보/화재의 3단계로 프로그램하여 Alarm의 순차적 동작과 SNS 전송이 이루어졌다. 비화재보시험을 위해 백열등, 형광등에 대해 시험하였으나 모두 비화재보를 발생하지 않았다. 시간대별 화염의 변화영상과 진행방향 및 확산속도의 분석은 화재진행상황 예측이나 열화상 실시간 추정과 경보로 비화재보 감소가 가능함을 확인하였다.

시료 중 잔류 항생제 분석 방법: IV. EPA method 1694와 비교 가능한 기기 분석 방법 (Determination of Veterinary Antibiotic Residues: IV. Comparable Analytical Methods with EPA Methods 1694_A Review)

  • 김찬식;류홍덕;정유진;김용석;류덕희
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.670-699
    • /
    • 2016
  • In this study, 16 antibiotics were selected from among the top 30 veterinary antibiotics sold in South Korea in 2014, as well as from among the pharmaceuticals targeted by EPA method 1694, in order to review analytical methods for the detection of trace levels of antibiotics in environmental samples: surface water, soils, animal origin foods, and manures. LC-MS/MS was heavily used. In the chromatography for the detection of the selected antibiotics, the $C_{18}$ column was mostly used at the temperature of $30{\sim}40^{\circ}C$. Water and methanol/acetonitrile were commonly chosen as a nonpolar and a polar mobile phase, respectively. Gradient elution was applied to separate multiclass antibiotics. Volatile additives, such as formic acid, acetic acid, and ammonium acetate were mixed with the mobile phase to improve the ionization efficiency of analytes and the sensitivity in MS detection. Electrospray ionization (ESI) was widely used in the LC-MS/MS and positive ionization was preferred to determine the selected antibiotics. A protonated $[M+H]^+$ molecule was selected as a precursor ion, and its two transitions were analyzed, one for quantitative measurement and the other for confirmation. This study reviewed linearity of the calibration curve, recovery, repeatability, method detection limits (MDLs), and method quantification limits (MQLs) for each target compound used to validate the developed analytical methods.

Physical Properties of Transiting Planetary System TrES-3

  • Lee, Jae-Woo;Youn, Jae-Hyuck;Kim, Seung-Lee;Lee, Chung-Uk;Koo, Jae-Rim;Park, Byeong-Gon
    • 천문학회보
    • /
    • 제35권2호
    • /
    • pp.65.2-65.2
    • /
    • 2010
  • We present four new transits of the planetary system TrES-3 observed between 2009 May and 2010 June. Among those, the third transit by itself indicates possible evidence for brightness disturbance, which could originate from a starspot or an overlapping double transit. A total of 107 transit times, including our measurements, were used to determine the improved ephemeris with a transit epoch of $2454185.910950\pm0.000073$ HJED (Heliocentric Julian Ephemeris Date) and an orbital period of $1.30618698\pm0.00000016$ d. We analyzed the transit light curves using the JKTEBOP code and adopting the quadratic limb-darkening law. In order to derive the physical properties of the TrES-3 system, the transit parameters are combined with the empirical relations from eclipsing binary stars and stellar evolutionary models, respectively. The stellar mass and radius obtained from a calibration using $T_{eff}$, log $\rho$ and [Fe/H] are in good agreement with those from the isochrone analysis within the uncertainties. We found that the exoplanet TrES-3b has a mass of $1.93\pm0.07\;M_{Jup}$, a radius of $1.30\pm0.04\;R_{Jup}$, a surface gravity of $28.2\pm1.1\;m\;s^{-1}$, a density of $0.82\pm0.06\;\rho_{Jup}$, and an equilibrium temperature of $1641\pm23K$.

  • PDF

비분산 적외선 방식의 CO2 센서 모듈에 관한 연구 (A Study on CO2 Sensor Module Using NDIR Method)

  • 김규식;오준태;김희식;김조천
    • 전자공학회논문지SC
    • /
    • 제46권2호
    • /
    • pp.36-40
    • /
    • 2009
  • 본 연구에서는 비분산 적외선 방식을 이용한 일산화탄소, 이산화탄소 듀얼 센서 모듈을 실현한다. 비분산 적외선 방식은 가스분자가 특정 파장의 적외선을 흡수하는 특성을 이용하여 가스의 적외선 흡수도를 측정하여 농도로 환산하는 방식이다. 비분산 적외선 방식은 수명이 길고 정밀도가 높아 기존의 접촉식(화학식) 센서에 비해 우수한 특성을 가지고 있다. 중요한 기술은 NDIR의 핵심 부분인 광공동의 설계 기술과 센서의 성능을 최종 결정짓는 농도-온도 교정 기술이다. 현재까지 개발된 광 공동 기술은 CO2센서의 단일 센서 방식이었다. 본 연구에서는 이 기술을 접목한 일산화탄소까지 동시에 측정할 수 있는 광공동기술과 교정기술을 연구 개발하여 하나의 광 공동으로 이산화탄소와 일산화탄소를 동시에 측정 할 수 있는 고기능 센서를 실현하는 것이다.

공기중 라돈 및 라돈 자핵종의 농도 측정 (Measurement of Radon and its Daughters Concentration in Air)

  • 박영웅;하정우;노성기
    • Journal of Radiation Protection and Research
    • /
    • 제14권2호
    • /
    • pp.23-29
    • /
    • 1989
  • 이중관 형태의 라돈 표준선원을 제작하여 루카스셀의 계수치 (cph)를 라돈농도로 나타내기 위한 환산인자를 측정한 결과 라돈 표준선원을 실온으로 하였을 때는 0.031$\pm$0.001 (pCi/l)/(cph/Cell)였다. 사무실 내에서 라돈과 라돈 자핵종의 농도를 측정한 값은 $^{222}Rn,\;{\rightarrow}^{218}Po\;{\rightarrow}^{214}Pb,\;{\rightarrow}^{214}Bi$ 의 평균 농도가 각각 0.87, 0.53, 0.35, 0.26 pCi/l 였다. 이때 전체 방사평형인자와 WL의 평균 값은 각각 0.40, 3.33${\times}10^{-3}$ 이며 측정 지점에서 연간 피폭되는 방사선량으로 환산하면 약 30 mren 이다.

  • PDF

2상류용 전류형식 전자기유량계 이론 및 환상류에서의 3차원 가상포텐셜 분포의 수치적 계산 (Theory of a Current-Type Electromagnetic Flowmeter for Two-Phase Flow and Numerical Computation of the 3D Virtual Potential Distributions for Annular Flow)

  • 오병도;김무환;안예찬
    • 대한기계학회논문집B
    • /
    • 제27권6호
    • /
    • pp.714-725
    • /
    • 2003
  • The theory of the current-type electromagnetic flowmeter for a high temporal resolution was developed for two-phase flow measurements. To predict the output of the current-type flowmeter, the three-dimensional virtual potential distribution C and the newly introduced flow pattern coefficient f were derived and computed. The output of flowmeter depends on the liquid conductivity (sensitive to temperature) and flow configurations of the two-phase flow with the sinusoidal excitation over 100 Hz. The flow pattern coefficient was specially devised to separate the dependency on the flow configuration of the two-phase flow from that on the liquid conductivity which can be expressed with the calibration of single-phase flow. Using the finite difference method, the three-dimensional virtual potential distributions were computed for the electrode of finite size. By taking derivative of the virtual potential, the weight functions were evaluated and compared with existing analytic series solution for the point-electrode. There was a reasonable correspondence between the present and existing results. In addition, the flow pattern coefficients were evaluated for annular flows with various film thicknesses, and compared with the experimental results by the impedance spectroscopy. The numerical results agreed well with the experimental data.

인디고 분석 표준액의 제조법 및 쪽 육성계통의 인디고 함량변이 (Preparation Method of Indigo Standard Solution and Variation of Indigo Contents in Blue Dye Extract from Breeding Lines of Persicaria tinctoria H. Gross)

  • 김성주;고재형;박시형;김명석;김관수
    • 한국약용작물학회지
    • /
    • 제21권3호
    • /
    • pp.213-219
    • /
    • 2013
  • This study was carried out to find out the optimum method of preparation of indigo standard solution and its stability, and to investigate the indigo contents in Niram, blue dye extract, from a total of 7 indigo plants and 34 breeding lines of Persicaria tinctoria H. Gross. Proper solvent for indigo standard was dimethyl sulfoxide (DMSO), and appropriate concentration was 1 mg of indigo in 10 mL of DMSO. Absorbance value of UV/Vis Spectrophotometer at 620 nm of standard solution was changed decreasingly 12 hours after the preparation of standard solution irrespective of the storage conditions such as temperature and light. Average value of absorbance of 8-fold diluted standard solutions prepared daily during 16 days was $0.210{\pm}0.005$, indicating the powder of indigo compound was stable chemically. Calibration curve was made for quantitative analysis of indigo of 7 Niram samples, and indigo contents ranged from 0.69% to 18.76% showing relatively larger variation. Across all 34 breeding lines, the range of indigo content was from 7.9 mg to 56.4 mg per 100 g of fresh leaves, averaging 25.2 mg of indigo content and showing a 47.7% coefficient of variation.

DESIGN OF CAMERA CONTROLLER FOR HIGH RESOLUTION SPACE-BORN CAMERA SYSTEM

  • Heo, Haeng-Pal;Kong, Jong-Pil;Kim, Young-Sun;Park, Jong-Euk;Yong, Sang-Soon
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.130-133
    • /
    • 2007
  • In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

  • PDF

LC-MS/MS를 이용한 반하사심탕 물 추출물 중 13종 성분의 함량분석 (Quantitative Determination of the Thirteen Marker Components in Banhasasim-Tang Decoction Using an Ultra-Performance Liquid Chromatography Coupled to Electrospray Ionization Tandem Mass Spectrometry)

  • 서창섭;신현규
    • 생약학회지
    • /
    • 제47권1호
    • /
    • pp.62-72
    • /
    • 2016
  • Banhasasim-tang is a well-known traditional Korean herbal formula and has been used clinically for the treatment of gastric disease, including acute and chronic gastritis, diarrhea and gastric ulcers in Korea. In this study, an ultra-performance liquid chromatography-electrospray ionization-mass spectrometer method was developed for the quantitative determination of the 13 marker constituents, homogentisic acid (1), 3,4-dihydroxybenzaldehyde (2), spinosin (3), liquiritin (4), baicalin (5), ginsenoside Rg1 (6), liquiritigenin (7), wogonoside (8), ginsenoside Rb1 (9), baicalein (10), glycyrrhizin (11), wogonin (12), and 6-gingerol (13) in Banhasasim-tang decoction. Separation of the compounds 1-13 was using an UPLC BEH $C_{18}$ ($100{\times}2.1mm$, $1.7{\mu}m$) column and column oven temperature was maintained at $45^{\circ}C$. The mobile phase consisted of 0.1% (v/v) formic acid in water (A) and acetonitrile (B) by gradient elution. The injection volume and flow rate were $2.0{\mu}L$ and 0.3 mL/min, respectively. Calibration curves of the compounds 1-13 were showed with $r^2$ values ${\geq}0.9908$. The limit of detection and limit of quantification values of the compounds 1-13 were 0.04-1.11 ng/mL and 0.13-3.33 ng/mL, respectively. Among the these compounds, the compounds 1-3 were not detected, while the compounds 4-13 were detected in the ranges of $3.20-107,062.98{\mu}g/g$ in Banhasasim-tang sample.