DOI QR코드

DOI QR Code

Thermal Image Real-time estimation and Fire Alarm by using a CCD Camera

CCD 카메라를 이용한 열화상 실시간 추정과 화재경보

  • Baek, Dong-Hyun (Dept. of Fire & Disaster Protection Engineering, Gachon Univ.)
  • 백동현 (가천대학교 설비.소방공학과)
  • Received : 2016.11.03
  • Accepted : 2016.12.12
  • Published : 2016.12.31

Abstract

This study evaluated thermal image real-time estimation and fire alarm using by a CCD camera, which has been a seamless feature-point analysis method, according to the angle and position and image fusion by a vector coordinate point set-up of equal shape. The system has higher accuracy, fixing data value of temperature sensing and fire image of 0~255, and sensor output-value of 0~5,000. The operation time of a flame specimen within 500 m, 1000 m, and 1500 m from the test report specimen took 7 s, 26 s, and 62 s, respectively, and image creation was proven. A diagnosis of fire accident was designated to 3 steps: Caution/Alarm/Fire. Therefore, a series of process and the transmission of SNS were identified. A light bulb and fluorescent bulb were also tested for a false alarm test, but no false alarm occurred. The possibility that an unwanted alarm will be reduced was verified through a forecast of the fire progress or real-time estimation of a thermal image by the change in the image of a time-based flame and an analysis of the diffusion velocity.

본 논문은 Charge-Coupled Device (CCD) 카메라를 이용한 열화상의 실시간 추정과 화재경보에 대하여 논한 것으로 각도 및 위치에 따른 특징점 분석과 동일 형상의 벡터 성분 좌표점 설정에 따른 이미지 융합이 잘 되었다. 영상을 Display하는 픽셀의 데이터 값은 0~255, 센서 출력값은 0~5,000로 하여 정확성이 높았다. 시험결과 시험체로부터 500 m, 1000 m, 1500 m 거리에서 화염에 의한 시험체의 작동시간은 각각 7초, 26초, 62초 소요 되었고 화면이미지 생성이 효과적으로 이루어졌다. 화재 발생 진단은 주의/경보/화재의 3단계로 프로그램하여 Alarm의 순차적 동작과 SNS 전송이 이루어졌다. 비화재보시험을 위해 백열등, 형광등에 대해 시험하였으나 모두 비화재보를 발생하지 않았다. 시간대별 화염의 변화영상과 진행방향 및 확산속도의 분석은 화재진행상황 예측이나 열화상 실시간 추정과 경보로 비화재보 감소가 가능함을 확인하였다.

Keywords

References

  1. J. H. Lee, Y. S. Cho, D. H. Baek and J. K. Kim, Test Standards for Detecting Fire by CCD Camera, Proceedings of 2015 Fall Annual Conference, Korean Institute of Fire Science & Engineering, pp. 137-138 (2015).
  2. "Detector of the Type Approval and Technical Standards of Product Inspection", Ministry of Public Safety and Security Notification (2015).
  3. NFSC 203, "Automatic Fire Detection System and Visual Warning Device Fire Safety Codes", Ministry of Public Safety and Security Notification (2015).
  4. FM, "Approval Standard for Video Image Fire Detectors for Automatic Fire Alarm Signaling" (2012).
  5. ISO 7240, "Fire Detection and Alarm System Part 29 Video Fire Detectors" (2015).
  6. Korea Information and Communication Construction Association, "CCTV System Install Standard Method" (2012).
  7. D. H. Baek, "A Study on the Improvement for Sensitivity Test of Flame Detectors", Fire Science and Engineering, Proceedings, Vol. 28, No. 6, pp. 58-61 (2014).